[build log] 0 kelvin 4.0

freaksavior · Feb 20, 2009

Cold Storm said:
Glad it's working man! Really glad!!!

i kinda am because it keep crashing and bsod on me. Im trying to repair my os install but its not looking good.

I think something is wrong with my samsung drive. it sometimes works sometimes doesn.t

Chicken Patty · Feb 20, 2009

freaksavior said:
couldn't have said it better.

ODD is fine, bought a LG 22x at bby for 43 retail so not to bad.

How do i turn off the fan error? its annoying as hell

p.s

WE HAVE LIFT OFFFFFFFFFFFFFFFFF!!!!!!!!!!!! WOOT im in windows now

as far as the fan error, go into the bios and in the hw monitor section you should be able to change under the fan speed column or row, you should be able to change it to ignore. TRy it out.

freaksavior · Feb 20, 2009

well one stick of ram wasn't pushed in for som reason, and my odd is messed up. idk what it is.

I need a game to push my gtx now

freaksavior · Feb 20, 2009

okay so i got it updated all seems working. Now seems time to OC

EnergyFX · Feb 20, 2009

Next time... double check all your wires before you plug them back in.

lol

freaksavior · Feb 20, 2009

EnergyFX said:
Next time... double check all your wires before you plug them back in.

lol

The samsung odd doesn't work right for some reason though. I can plug it in and then it stops working. its werid.
________________________________________________________________________________________________________________________

So now i got it to 4.0 but in real temps it says 2900 ?

freaksavior · Feb 20, 2009

real temps says my temps are 90c load?!!?! isn't that way to hot

Chicken Patty · Feb 20, 2009

freak savior, are you still on air? If so thats normal. Lower your voltage. These chips do up to 100ºc. Try to stay around 80ºc. You should be able to do 3.6-3.7 GHz somewhere around 1.25v and that should keep your temps in check. Thats what I ran mine on air.

freaksavior · Feb 21, 2009

me air? hell no!

although i did a very nice and very simple mod to the stock hsf. I cut out the push pins and used the bolt through kit off my d-tek

im pushing 1.45 @ 4.2 right now. OCCT fails because of heat. whats the max temps these should reach?

Chicken Patty · Feb 21, 2009

freaksavior said:
me air? hell no!

although i did a very nice and very simple mod to the stock hsf. I cut out the push pins and used the bolt through kit off my d-tek

im pushing 1.45 @ 4.2 right now. OCCT fails because of heat. whats the max temps these should reach?

100ºc is absolute max.

So you are on water already and you are getting 90ºc. I max out at 60-63ºc at 4.0 GHz 1.305v. during a wprime run of 4.4 GHz at 1.5v I see about 82-84ºc HT on of course.

Then people ask me why I have a monster 120.4 rad only for the CPU. Well theres your answer folks, i7's run super hot!

freaksavior · Feb 21, 2009

Really? so it is safe at that temp? wow okay...

Chicken Patty · Feb 21, 2009

freaksavior said:
Really? so it is safe at that temp? wow okay...

i dont feel comfortable running it that high, but they go up to 100ºc, obvioulsy you'd wanna stay a good 7-10ºc under that.

freaksavior · Feb 21, 2009

hmmm okay. well its 42c idle temp now

Cold Storm · Feb 21, 2009

It seems to take some time to get Accurate temps. I never judge temps till at lease 3 hours past, or a day.

Glad it's going good man!

freaksavior · Feb 21, 2009

Cold Storm said:
It seems to take some time to get Accurate temps. I never judge temps till at lease 3 hours past, or a day.

Glad it's going good man!

thanks

im trying to do 215x20 now

johnnyfiive · Feb 21, 2009

WOW, i7's get hot as hell.

Chicken Patty · Feb 21, 2009

freaksavior said:
hmmm okay. well its 42c idle temp now

load?

johnnyfiive said:
WOW, i7's get hot as hell.

you bet!

freaksavior · Feb 21, 2009

Chicken Patty said:
load?

you bet!

hits over 100c occt fails because i set max at 100c

im running it at 4.0 and 1.35.. i want to hit 4.4 though but i dont like those temps

Chicken Patty · Feb 21, 2009

freaksavior said:
hits over 100c occt fails because i set max at 100c

im running it at 4.0 and 1.35.. i want to hit 4.4 though but i dont like those temps

can you link me to your Radiator? Might need more cooling.

This is the one I have an at 4.2 GHz 1.4v I hit like 70-74ºc and at 4.4 Ghz HT on 1.5v I hit 80-85ºc

http://www.sidewindercomputers.com/hwlablicegtb7.html

freaksavior · Feb 21, 2009

http://www2.partstrain.com/store/?Ntt=Heater Core&N=1697 11523 4294965441

using 2 of those

http://www.bit-tech.net/modding/2008/05/18/dtek-fuzion-2-waterblock/1

block

http://www.petrastechshop.com/laddcwpeddto.html
pump 1
http://www.petrastechshop.com/swmcin12pu.html
pump 2

Chicken Patty · Feb 21, 2009

freaksavior said:
http://www2.partstrain.com/store/?Ntt=Heater Core&N=1697 11523 4294965441

using 2 of those

http://www.bit-tech.net/modding/2008/05/18/dtek-fuzion-2-waterblock/1

block

http://www.petrastechshop.com/laddcwpeddto.html
pump 1
http://www.petrastechshop.com/swmcin12pu.html
pump 2

I think you need to get a good radiator. If you can find a Thermochill PA 120.3 or get a HW Labs GTX480 like I did. Thats your problem bro.

As far as pumps, just stay with the MCP 655, I have only one and it flows great through my rad. that'll fix your issue. Your waterblock is even better for the i7 than mine is.

freaksavior · Feb 21, 2009

How? shouldn't 2 be better than one? and the bonnie cores are suppose to be really good as rads

edit:

chicken get on aim please

cdawall · Feb 21, 2009

Chicken Patty said:
I think you need to get a good radiator. If you can find a Thermochill PA 120.3 or get a HW Labs GTX480 like I did. Thats your problem bro.

As far as pumps, just stay with the MCP 655, I have only one and it flows great through my rad. that'll fix your issue. Your waterblock is even better for the i7 than mine is.

those bonnie heatercores are better than a PA120.3 each the two pumps should flow very similar as the 2nd one is a special version not the standard one you get.

Chicken Patty · Feb 21, 2009

cdawall said:
those bonnie heatercores are better than a PA120.3 each the two pumps should flow very similar as the 2nd one is a special version not the standard one you get.

im just throwing something out there, hes hitting 100ºc at 1.35v. Thats too hot for that, something is not right. I told him to loosen up the water block a bit and if that dont help to re apply the thermal paste and re seat block again. Im puzzled, dont know what the problem can be here.

cdawall · Feb 21, 2009

Chicken Patty said:
im just throwing something out there, hes hitting 100ºc at 1.35v. Thats too hot for that, something is not right. I told him to loosen up the water block a bit and if that dont help to re apply the thermal paste and re seat block again. Im puzzled, dont know what the problem can be here.

i txted him to pull the chip and reseat the whole thing after cleaning it i had the same issue with my X3 and pulled the bugger out cleaned it and the block new paste and its dropped to 30C

System Name	ZeroUptime \| M.A.S.S / MM1
Processor	Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard	Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling	NZXT Kraken / Noctua NH-L12 / Apple
Memory	16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s)	Powercooler ATI vega 64 / GT 7300 / ARM
Storage	Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s)	Acer Predator X34 / Headless / Acer X34 Non predator
Case	NZXT H630 \|Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s)	Onboard / Onboard / Onboard
Power Supply	Corais HX850 \| Corsair TX750 / Internal 250w
Mouse	g502 proteus core / Headless / g502 proteus core
Keyboard	Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software	Windows 10 / ESXI / Big Sur 11.2.2

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	ZeroUptime \| M.A.S.S / MM1
Processor	Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard	Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling	NZXT Kraken / Noctua NH-L12 / Apple
Memory	16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s)	Powercooler ATI vega 64 / GT 7300 / ARM
Storage	Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s)	Acer Predator X34 / Headless / Acer X34 Non predator
Case	NZXT H630 \|Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s)	Onboard / Onboard / Onboard
Power Supply	Corais HX850 \| Corsair TX750 / Internal 250w
Mouse	g502 proteus core / Headless / g502 proteus core
Keyboard	Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software	Windows 10 / ESXI / Big Sur 11.2.2

System Name	ZeroUptime \| M.A.S.S / MM1
Processor	Xeon 2659 v3 / Xeon 2683 v4 / ARM A14
Motherboard	Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple
Cooling	NZXT Kraken / Noctua NH-L12 / Apple
Memory	16Gb DDR4 / 32Gb DDR4 / 16GB HBLM
Video Card(s)	Powercooler ATI vega 64 / GT 7300 / ARM
Storage	Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3
Display(s)	Acer Predator X34 / Headless / Acer X34 Non predator
Case	NZXT H630 \|Rosewill 8bay 4u server chasiss / MMM1
Audio Device(s)	Onboard / Onboard / Onboard
Power Supply	Corais HX850 \| Corsair TX750 / Internal 250w
Mouse	g502 proteus core / Headless / g502 proteus core
Keyboard	Corsair K95 Cherry Blue / Headless / K65 Cherry Red
Software	Windows 10 / ESXI / Big Sur 11.2.2

System Name	n.audBl
Processor	E8500 @ 3.80GHz
Motherboard	ASUS Striker Extreme
Cooling	Full liquid (everything except power supply)
Memory	4Gb OCZ DDR2 PC9600
Video Card(s)	Dual EVGA GTX 280 SSC Edition
Storage	Dual WD Raptor in RAID 0 (300Gb), Dual WD 1Tb Cavair in RAID 1
Display(s)	Dell 2407 24" HD+ Widescreen
Case	Theraltake Tai-Chi
Audio Device(s)	X-Fi Fata1ty (bleh!)
Power Supply	Ultra X3 1000W
Software	Win 7 64bit

System Name	Haro
Processor	AMD 1700x
Motherboard	AsRork x370 Taichi
Cooling	EK Custom Loop - CPU only
Memory	32gb G-Skill Trident Z
Video Card(s)	EVGA 1080 Superclock 2
Storage	Too Many
Display(s)	Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case	Cooler Master Cosmos II
Power Supply	Cooler Master V1000
Mouse	SteelSeries Rival 500
Software	Win10 Pro
Benchmark Scores	i5 750 4.62ghz pi runs // Evga FTW p55

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

[build log] 0 kelvin 4.0

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

Attachments

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

Battosai

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

To infinity ... and beyond!

where the hell are my stars

where the hell are my stars