• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Crossfire issues with Vista X64

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Right now I'm running Vista Ultimate X64, but I'm having issues with crossfire. I get massive artifacts and display corruption when I run anything 3d in full screen. It doesn't show in screenshots or when running in windowed mode for some reason though. It's not 3d artifacts either, just the image tearing badly and jumping all around the screen. I've tried both 8.1 and 7.12 drivers and it's the same.

Anybody else had this? Any suggestions?
 
Joined
Feb 15, 2007
Messages
1,925 (0.31/day)
Processor Intel C2D E8500 @ 4.25GHz (1.36V)
Motherboard Gigabyte GA-X38-DQ6
Cooling (Temporary) Tuniq Tower 120
Memory 2GB Transcend aXeram 1200+
Video Card(s) HIS HD3870 CF Volt modded
Storage 3 Seagate 320Gb Barracuda in an Intel Matrix Raid array
Display(s) Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch")
Case Ultra Aluminus Full Tower
Audio Device(s) onboard Intel HD audio
Power Supply PC Power & Cooling Silencer 750
Software XP MCE + Vista (HP) dual-boot
Might want to check your CCC settings. Catalyst A.I. should be at Standard (maybe even Disabled).

Try Disabled first and report back.
 
Joined
Oct 31, 2005
Messages
11 (0.00/day)
Location
Czech Republic
windowed mode probably dont enable crossfire = second card, thats why you dont see corruption, did you use only one crossfire interconnect bridge?
Catalyst AI set to off is same as running it in windowed mode, it disables crossfire.
Try to test both cards but only one plugged in computer at a time. Maybe second one is bad and from what you write it is, cause i dont have any problems under 64bit Vista.
 
Joined
Feb 15, 2007
Messages
1,925 (0.31/day)
Processor Intel C2D E8500 @ 4.25GHz (1.36V)
Motherboard Gigabyte GA-X38-DQ6
Cooling (Temporary) Tuniq Tower 120
Memory 2GB Transcend aXeram 1200+
Video Card(s) HIS HD3870 CF Volt modded
Storage 3 Seagate 320Gb Barracuda in an Intel Matrix Raid array
Display(s) Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch")
Case Ultra Aluminus Full Tower
Audio Device(s) onboard Intel HD audio
Power Supply PC Power & Cooling Silencer 750
Software XP MCE + Vista (HP) dual-boot
I agree that running windowed mode does indee disable CF, but I found that in Vista you could disable Cat A.I. and still have CF capabilities, albeit diminished since you don't have the driver "optimizations".
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Really? Screw this then, I'm going back to XP, Vista has wayyyyy too many issues to be used everyday.

I know for sure both card are fine, I've tested both, and the artifacts don't appear in screenshots, meaning it's an output issue, not a processing issue.
 
Joined
Oct 31, 2005
Messages
11 (0.00/day)
Location
Czech Republic
Really? Screw this then, I'm going back to XP, Vista has wayyyyy too many issues to be used everyday.

I know for sure both card are fine, I've tested both, and the artifacts don't appear in screenshots, meaning it's an output issue, not a processing issue.

Catalysts 8.2 will get out today, so wait and try them and if still dont help, you can try XP.
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
My Vista installation went down the drain anyway. Everything's crashing, drivers are magically uninstalling themselves, and almost nothing works like it should.
 
Joined
Dec 18, 2005
Messages
8,253 (1.23/day)
System Name money pit..
Processor Intel 9900K 4.8 at 1.152 core voltage minus 0.120 offset
Motherboard Asus rog Strix Z370-F Gaming
Cooling Dark Rock TF air cooler.. Stock vga air coolers with case side fans to help cooling..
Memory 32 gb corsair vengeance 3200
Video Card(s) Palit Gaming Pro OC 2080TI
Storage 150 nvme boot drive partition.. 1T Sandisk sata.. 1T Transend sata.. 1T 970 evo nvme m 2..
Display(s) 27" Asus PG279Q ROG Swift 165Hrz Nvidia G-Sync, IPS.. 2560x1440..
Case Gigabyte mid-tower.. cheap and nothing special..
Audio Device(s) onboard sounds with stereo amp..
Power Supply EVGA 850 watt..
Mouse Logitech G700s
Keyboard Logitech K270
Software Win 10 pro..
Benchmark Scores Firestike 29500.. timepsy 14000..
Really? Screw this then, I'm going back to XP, Vista has wayyyyy too many issues to be used everyday.

I know for sure both card are fine, I've tested both, and the artifacts don't appear in screenshots, meaning it's an output issue, not a processing issue.

yep...

trog
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Wow now this is all kinds of bullshit. I went back to XP 32bit and guess what? I still get the corruption, even after switching the card around physically, hell it's even worse now. I'm using 8.2 drivers.

What else could it be? I'm gonna try using a VGA cable instead of DVI, maybe that'll do something.
 
Joined
Oct 31, 2005
Messages
11 (0.00/day)
Location
Czech Republic
I guess something is bad on your graphic card, probably for RMA :(
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
But which one would it be? Both are perfect by themselves. Plus, I only have the chance of RMAing the HIS one, I don't have the receipt for the sapphire one. :(
 
Joined
Jun 17, 2007
Messages
7,335 (1.19/day)
Location
C:\Program Files (x86)\Aphexdreamer\
System Name Unknown
Processor AMD Bulldozer FX8320 @ 4.4Ghz
Motherboard Asus Crosshair V
Cooling XSPC Raystorm 750 EX240 for CPU
Memory 8 GB CORSAIR Vengeance Red DDR3 RAM 1922mhz (10-11-9-27)
Video Card(s) XFX R9 290
Storage Samsung SSD 254GB and Western Digital Caviar Black 1TB 64MB Cache SATA 6.0Gb/s
Display(s) AOC 23" @ 1920x1080 + Asus 27" 1440p
Case HAF X
Audio Device(s) X Fi Titanium 5.1 Surround Sound
Power Supply 750 Watt PP&C Silencer Black
Software Windows 8.1 Pro 64-bit
But which one would it be? Both are perfect by themselves. Plus, I only have the chance of RMAing the HIS one, I don't have the receipt for the sapphire one. :(

I just recently RMA'ed my RAM from Newegg and I didn't need my recitte for it, they just wanted my Phone number and address.
 
Joined
Oct 31, 2005
Messages
11 (0.00/day)
Location
Czech Republic
Did you tried to use second interconnect bridge? or both bridges at once?
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
I tried both bridges. Should I try one?

I need to RMA to sapphire though, I bough the card used.
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Just noticed something strange again, if I ALT-TAB out or open the task manager, the screen will return to normal for a split second. Also, the corruption in Vista was less than in XP, I could actually go through menus and play a bit in Vista, in XP it's impossible. This is making me think software problem. Gonna try some older drivers.
 

MadCow

New Member
Joined
Jun 8, 2007
Messages
544 (0.09/day)
Processor Athlon 64 X2 4400+ @2.6 GHz
Motherboard DFI LanParty UT CFX3200
Cooling 120mm Yate Loon fan intake, 82mm ex-PSU fan exhaust
Memory 2048 mb. of cheap DDR400 RAM w/cheap heatspreaders
Video Card(s) Sapphire+HIS X1950 PRO, Crossfired@635/709
Storage WD 250 GB SATA
Display(s) Samsung 216BW
Case No-name ATX case (modded to hell)
Audio Device(s) SB X-FI OEM
Power Supply Nikao Cool Power 500W (34a@12v)
Software Windows XP PRO SP2
Using 1 bridge just disabled crossfire. I'm back to 1 card for now, this is too confusing.
 
Top