1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

E6850 Temps when ocing

Discussion in 'Overclocking & Cooling' started by Live OR Die, May 28, 2008.

  1. Live OR Die

    Live OR Die

    Joined:
    May 19, 2007
    Messages:
    4,041 (1.46/day)
    Thanks Received:
    424
    Does any one know what are safe temps when ocing with a E6850 are im running my cpu at 3.69Ghz stock volts, i ran ORTHOS my cpu runs at 40-45c idie and 55-61c under load?
     

    Attached Files:

    Last edited: May 28, 2008
  2. Live OR Die

    Live OR Die

    Joined:
    May 19, 2007
    Messages:
    4,041 (1.46/day)
    Thanks Received:
    424
    i used antec silver 5 when putting it on should i have cleaned the cpu with a alcohol wipe? does it matter much
     
  3. echo75 New Member

    Joined:
    Apr 11, 2008
    Messages:
    456 (0.19/day)
    Thanks Received:
    46
    Location:
    Denmark
    those temps are freakin fine mate. Considering they are core temps you can actually go up to 68-69 core temps (Tjunction) without u needing to get the slightest worried coz u will still be 25-30 C lower than Tjuction maximumof 95-100C.

    What is your Tcase under load, u can check it with speedfan. The max Tcase for your chip is 72C
     
    Live OR Die says thanks.
  4. Live OR Die

    Live OR Die

    Joined:
    May 19, 2007
    Messages:
    4,041 (1.46/day)
    Thanks Received:
    424
    thanks heres using speed fan, should i redo my thermal paste?
     

    Attached Files:

  5. echo75 New Member

    Joined:
    Apr 11, 2008
    Messages:
    456 (0.19/day)
    Thanks Received:
    46
    Location:
    Denmark
    according to speedfan your Tcase is 56C which is fins (max for ur chip is 72C ) but sadly i dont thnk its reading correctly coz as u notice its lower than the core temps which is not possible. Funny coz speedfan reads the temps correct on my own E6850 . it must be your motherboard, try Everest.
     
  6. Live OR Die

    Live OR Die

    Joined:
    May 19, 2007
    Messages:
    4,041 (1.46/day)
    Thanks Received:
    424
    heres my Everest Ultimate Edition temp :toast:
     

    Attached Files:

  7. echo75 New Member

    Joined:
    Apr 11, 2008
    Messages:
    456 (0.19/day)
    Thanks Received:
    46
    Location:
    Denmark
    hmm, well on thing for sure according to Everest your core is 60 c which corresponds to Speedfans core temp, so we are sure you are very safe mate. 60 C Tjunction temp is 35 C to 40 C below max values so i will sleep well i were you. :)
     
  8. Live OR Die

    Live OR Die

    Joined:
    May 19, 2007
    Messages:
    4,041 (1.46/day)
    Thanks Received:
    424
    lol do you think its safe to higher with uping the vcore or will it run even hotter
     
  9. echo75 New Member

    Joined:
    Apr 11, 2008
    Messages:
    456 (0.19/day)
    Thanks Received:
    46
    Location:
    Denmark
    ofc it will run hotter but you still have about 10 C to play with and it will still be in the safety zone. i have exactly same chip that runs 65-69 C core temps (Tjunction) with 56 C (Tcase) on max load with Orthos samll FFTS.
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page