1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ECS H77 Black Series Micro-ATX Motherboard Pictured

Discussion in 'News' started by btarunr, Jan 12, 2012.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,436 (11.28/day)
    Thanks Received:
    13,620
    Location:
    Hyderabad, India
    Apart from the Z77H2-AX, ECS showed off a mainstream socket LGA1155 motherboard based on the H77 "Panther Point" chipset, in the micro-ATX form-factor. The H77 chipset has the same feature-set as the Z77, except it lacks Rapid Storage Technology, and overclocking features. Out of the box, this board supports next-generation "Ivy Bridge" Core processors.

    The LGA1155 socket is powered by a 6-phase VRM. It is wired to four DDR3 DIMM slots supporting dual-channel DDR3 memory; and a PCI-Express 3.0 x16 slot. Other slots include a PCIe 2.0 x1, and two legacy PCI slots driven by an ITE-made bridge chip. Storage connectivity includes two SATA 6 Gb/s, and four SATA 3 Gb/s, all wired to the PCH. Display connectivity includes DVI, D-Sub, and HDMI. Other connectivity includes 8-channel HD audio, gigabit Ethernet, and four USB 3.0 ports (all driven by the PCH). The board uses cost-effective electrolytic capacitors on all circuits that don't deal with large currents, only the power conditioning circuits have solid-state capacitors.

    [​IMG]
  2. Drone

    Drone

    Joined:
    Sep 1, 2010
    Messages:
    2,597 (1.78/day)
    Thanks Received:
    1,298
    So cool
  3. Completely Bonkers New Member

    Joined:
    Feb 6, 2007
    Messages:
    2,580 (0.93/day)
    Thanks Received:
    516
    That x16 and the RAM sockets are going to foul each other. The should have put the x1 first, then the x16, for better spacing. Also, x16 is often dual slot, leaving essentially 1 PCIe slot and two legacy PCI. Swapped round, there would have been x1, then x16, and if dual, still one PCI.
  4. THE_EGG

    THE_EGG

    Joined:
    Dec 15, 2011
    Messages:
    1,416 (1.43/day)
    Thanks Received:
    419
    Location:
    Brisbane QLD, Australia
    yeh the 16x should really only be put first if its SLI/Crossfire capable like Asus' Gene motherboards.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page