1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ECS Readies LGA1155 Motherboard with Lucid Hydra

Discussion in 'News' started by btarunr, Sep 26, 2010.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,713 (11.16/day)
    Thanks Received:
    13,669
    Location:
    Hyderabad, India
    ECS is designing an upper-mid range socket LGA1155 motherboard based on the Intel P67 Express chipset, ready with upcoming Sandy Bridge processors, called the P67H2-A. A pre-release version was shown to the press. The highlight here is ECS' use of the LucidLogix Hydra Engine chip that lets the motherboard mix and match graphics cards of different makes and types. The CPU is powered by a 14-phase VRM, it is wired to four DDR3 DIMM slots for dual-channel memory, speeds of up to 2600 MHz are supported by overclocking. Expansion slots include three PCI-Express 2.0 x16 (likely x16, x16, NC / x16, x8, x8, thanks to the Hydra chip), and two each of PCI-E x1 and PCI. Four out of six of the SATA 3 Gb/s ports from the P67 PCH are assigned as internal ports (color-coded orange), two SATA 6 Gb/s controllers give out two ports internal (color-coded red). Connectivity includes 8-channel HD audio, dual gigabit Ethernet, two NEC USB 3.0 controllers that give out two ports on the rear panel and two for the front-panel via header, eSATA 6 Gb/s, and a number of USB 2.0 ports. The final version may look slightly different, of course those jumper wires won't be there.

    [​IMG]

    Source: bit-tech.net
     
  2. RejZoR

    RejZoR

    Joined:
    Oct 2, 2004
    Messages:
    4,741 (1.29/day)
    Thanks Received:
    980
    Location:
    Europe/Slovenia
    ECS is really pushing it to become a big motherboard player. I mean, they used to be very passive back then, but today they are making some pretty decent boards.
     
  3. entropy13

    entropy13

    Joined:
    Mar 2, 2009
    Messages:
    4,948 (2.40/day)
    Thanks Received:
    1,215
    I've seen motherboards with 3 colors used for slots (RAM, PCI-E, etc.), but 4? lol
     
  4. _JP_

    _JP_

    Joined:
    Apr 16, 2010
    Messages:
    2,684 (1.62/day)
    Thanks Received:
    738
    Location:
    Portugal
    Wohoo! Loose wires!
    Well, it certainly doesn't look dull.
     
  5. BUCK NASTY

    BUCK NASTY F@H Mod & 4P Enthusiust Staff Member

    Joined:
    Aug 8, 2007
    Messages:
    4,447 (1.69/day)
    Thanks Received:
    3,533
    Location:
    Tallahassee, FL. U.S.A.
    Apparently they have had to employ some jumper wires. At least we know it functional.:laugh:
     
  6. theonedub

    theonedub habe fidem

    Joined:
    Apr 30, 2009
    Messages:
    7,167 (3.58/day)
    Thanks Received:
    3,720
    The black series boards look nice, this one is a little busy :laugh:
     
    scaminatrix says thanks.
    Crunching for Team TPU
  7. scaminatrix

    scaminatrix

    Joined:
    Mar 1, 2010
    Messages:
    3,579 (2.11/day)
    Thanks Received:
    794
    Location:
    By the Channel Tunnel, Kent, England
    Does look a little cramped doesn't it? At first glance I thought it was a micro ATX, probably because the heatsinks dwarf the bottom half of the board.

    Looks functional, though.
     
  8. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    I have to agree, ECS is really making a push for the enthusiast market with better and better products and i would hope with better support.
     
  9. FreedomEclipse

    FreedomEclipse ~Technological Technocrat~

    Joined:
    Apr 20, 2007
    Messages:
    13,844 (5.05/day)
    Thanks Received:
    2,337

    IMO theres plenty of room on the motherboard market. with the decline of DFI and the Demise of BFGtech theres a huge gap to fill. but Im guessing they also have a little motivation from FOXCONN - a brand that until the last year or so mainly focused on OEM market so werent that well known and as poplular as some of the bigger names out there.

    they have big boots to fill
     
  10. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    I would hope that everyone will agree there is room for more as more high end compition will push other companys to try and one up the other top end boards but also push down prices (i hope lol).
     
  11. FreedomEclipse

    FreedomEclipse ~Technological Technocrat~

    Joined:
    Apr 20, 2007
    Messages:
    13,844 (5.05/day)
    Thanks Received:
    2,337
    Ive read previews of up n coming ECS boards, theres a lot of talk about the boards being fairly good but let down by a really really really bad bios's - so theres still room for improvement for ECS before they can run with the rest of the pack
     
  12. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    Yea the one major complaint i have heard from users is the lack of bios updates but i would hope that part of the push for the high end includes better bios support and hopefully customer support (if they need it, i can't comment on that myself).
     
  13. xaira

    Joined:
    Jul 20, 2009
    Messages:
    209 (0.11/day)
    Thanks Received:
    19
    it would be soo funny if these come out and intel announces that they are actually compatible with 1156
     
  14. _JP_

    _JP_

    Joined:
    Apr 16, 2010
    Messages:
    2,684 (1.62/day)
    Thanks Received:
    738
    Location:
    Portugal
    Too bad Intel has already officially announced that LGA 1156 and LGA 1155 are not compatible with each other due to number of pins and socket notches. :slap:
    Those kind of ideas come from AMDs department, pal.
     
    Last edited: Sep 27, 2010
  15. cool_recep

    cool_recep

    Joined:
    Oct 2, 2005
    Messages:
    344 (0.10/day)
    Thanks Received:
    63
    Location:
    Istanbul/Turkey
    Totally agreed. They suck at updating BIOS...mmm they don't update :) Proof: Check their X58B-A high end board...it was not even able to boot properly...
     
  16. pantherx12

    pantherx12 New Member

    Joined:
    Jan 2, 2009
    Messages:
    9,714 (4.58/day)
    Thanks Received:
    1,699
    Location:
    ENGLAND-LAND-LAND
    Crappy bioses on nice loooking mother-boards, wow they really are trying to be like foxconn!
     
  17. WarEagleAU

    WarEagleAU Bird of Prey

    Joined:
    Jul 9, 2006
    Messages:
    10,797 (3.56/day)
    Thanks Received:
    546
    Location:
    Gurley, AL
    Loving ECS boards lately but agreed with their BIOS. And also, what happened with DFI?
     
  18. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    DFI is gone :cry:

    I have had a few of their boards over the years and loved them, a shame to see them go but i really hope ECS can catch up with the other top board makers but right now it looks like bios support is the major thing they need to work on as they keep showing off some very nice looking boards.
     
  19. FreedomEclipse

    FreedomEclipse ~Technological Technocrat~

    Joined:
    Apr 20, 2007
    Messages:
    13,844 (5.05/day)
    Thanks Received:
    2,337
    DFI isnt gone - they have decided to withdraw from the general consumer market and focus on the Industry/OEM side of the market instead.

    in most interviews with tech websites that have sent reporters over to find out what happend to them, they have been very vague about whats going on with DFI,

    but one thing I am certain about is that the whole market withdraw spawned from one of the head/lead designers leaving DFI - but overall i think they have lost a fair few staff but they wont admit to it openly. but who knows - if they manage to pick up the right people in the future - their mobo's may well be on the shelves again
     
  20. cheezburger

    cheezburger New Member

    Joined:
    Sep 6, 2010
    Messages:
    265 (0.18/day)
    Thanks Received:
    11
    i thought ECS is just some random little flies that only make some crappy OEM board for dell and HP....

    but this board look just sexy........
     
  21. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    Oh i never realised, i had just seen a lot of people on other forums saying DFI is dead, but im still sad about it as if they are focusing on OEM then no more boards for me.
     
  22. bear jesus

    bear jesus New Member

    Joined:
    Aug 12, 2010
    Messages:
    1,535 (1.00/day)
    Thanks Received:
    200
    Location:
    Britland
    ECS has made a lot of OEM boards for quite a while but they have also been making retail boards for a while yet they always seamed to be lower end/cheap boards, they have recently been making a push into the higher end market and i think they will be there very soon with more and more boards like this being made, i have to admit i never would have considered an ECS before recently and now i am looking at each of their new releases/upcoming boards to see what they offer and hopefully they will get better wit their bios support as if they do i would definatly consider them for a future motherboard.
     
  23. FreedomEclipse

    FreedomEclipse ~Technological Technocrat~

    Joined:
    Apr 20, 2007
    Messages:
    13,844 (5.05/day)
    Thanks Received:
    2,337
    Its just FUD - not everyone knows what happend to DFI - its anybodys guess what happend to DFI and it pretty much seems like they died as they werent too open about sharing what was going on with the company. their not dead - more like in limbo. they planned to make more mobos but when the chief mobo designer left it kinda bought DFI back down to earth with a big thump. I dont know why they didnt bother trying to hire another lead designer or have one of the other designers step up and fill the chiefs shoes. but maybe they tried all that and they just couldnt find anyone suitable for the position.

    they'l still be lurking around - but making boards for enterprise server units n anything else that fits under the industry label.

    thats all i know unfortunately, thats all ive read as DFi werent willing to share anymore info
     
  24. Kantastic

    Kantastic

    Joined:
    May 12, 2009
    Messages:
    5,156 (2.59/day)
    Thanks Received:
    993
    Since we're speaking of Foxconn, ECS, DFI, and OEM motherboards, how come Foxconn doesn't just sell motherboards to OEM's themselves rather than to companies like DFI/ECS/ASUS? I recall Foxconn being a major motherboard manufacturer who makes motherboards for DFI/ECS/ASUS and a handful of other brands like Gigabyte & MSI.
     
  25. FreedomEclipse

    FreedomEclipse ~Technological Technocrat~

    Joined:
    Apr 20, 2007
    Messages:
    13,844 (5.05/day)
    Thanks Received:
    2,337
    they did - back in the old days when windows 98 was new and bios's for OEM branded machines had their bios's locked down to the most basic options. I dont know if they still do now though as those days are over and bigger brands in PC hardware have emerged meaning that people have some savvy about what their getting, and would rather their pre-built machine be shipped with an Asus motherboard then some brand thats less heard of among consumers n teckheads. either that or OEM companys just got used to shipping systems with better quality/more reliable hardware
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page