To view this case mod, go here. Specs: Intel i5 650@ 4.2Ghz Corsair XMS3 4GB @ 1552 Mhz Corsair 850HX Modular PSU EVGA P55 SLI MOB 2 x XFX AMD Radeon HD6870 2 x Western Digital 500 GB Black Caviar Raid - 0 Zerotherm ZT-10D Heat Sink Mods: False Floor / NZXT Cable Lighting / Cable Extensions / Blow Hole and Moder's Mesh in False Floor I made the false floor using Plexiglas and a Heat gun. I used the Heat gun to melt the Plexiglas and the bent it over a straight edge. I then sanded the Plexiglas with mid end sand paper several times. next proceeded to spray paint it with a flat black spray paint and flat clear coat. I then proceeded to add a 120mm Fan hole in the false floor along with cut moder's mesh to finish off the fan whole I just cut into the false floor. For my first attempt at really any decent modding I think it turned out rather nice!