Gigabyte GT210 BIOS

[AlexVS]

Hi All.
I have a videocard model Gigabyte GV-N210D3-1GI (rev. 5.0)
http://www.gigabyte.ru/products/page/vga/gv-n210d3-1girev_50/
I need to edit the BIOS - change freq. and voltage, but NiBiTor does not recognize bios data.
http://www.techpowerup.com/vgabios/130417/Gigabyte.G210.1024.120525.rom
Native newer BIOS, but also shows the wrong Nibitor.
Help me!

 

[EarthDog]

Why are you editing the bios for this stuff? Why not use afterburner and have it load up clocks on startup? Sure beats the risk of flashing...

 

[AlexVS]

Why are you editing the bios for this stuff? Why not use afterburner and have it load up clocks on startup? Sure beats the risk of flashing...

Afterburner does not regulate the voltage on this graphics card
I need Level3 on 400MHz\400MHz 0.9V
This stuff is used in a HTPC for watching movies. But really hot and noisy. I lowered the fan speed to 40% (it was at least 45%) after editing the BIOS, but with the frequency and voltage problem - nibitor them incorrectly displays.
---
http://www.techpowerup.com/vgabios/130417/gigabyte-g210-1024-120525.html
Performance Level 0 Core Clk: 135.00 MHz Mem Clk: 135.00 MHz Shader Clk: 270.00 MHz Voltage: 0.8500 V
Performance Level 1 Core Clk: 405.00 MHz Mem Clk: 405.00 MHz Shader Clk: 810.00 MHz Voltage: 0.9000 V
Performance Level 3 Core Clk: 590.00 MHz Mem Clk: 550.00 MHz Shader Clk: 1405.00 MHz Voltage: 1.0000 V
---
bios from other models gt210 does not fit - I tried (But nibitor their beautifully displays for editing)

 

[EarthDog]

Afterburner cant adjust the fan lower?

 

[AlexVS]

Afterburner cant adjust the fan lower?

No. In BIOS lock - was at minimum 45%
I dropped to 40% by changing the BIOS, but to make even smaller (at least 30-35%), it is necessary to reduce the voltage to the chip GPU.

 

[AlexVS]

Explored the bios HEX-editor and the signatures of the ASUS BIOS found I needed numbers
----------------------