1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

GIGABYTE Rolls Out C1007UN-D Mini-ITX Motherboard

Discussion in 'News' started by btarunr, Mar 13, 2013.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,873 (11.07/day)
    Thanks Received:
    13,716
    Location:
    Hyderabad, India
    GIGABYTE rolled out the C1007UN-D mini-ITX motherboard, for entry-level desktops. It ships with an Intel Celeron 1007U BGA processor hard-wired to the board, with a compatible fan-heatsink pre-installed. Based on the 22 nm "Ivy Bridge" micro-architecture, the 1007U is a dual-core chip, clocked at 1.50 GHz, with 2 MB of L3 cache, and 17W TDP. Backing the chip on this motherboard is Intel's NM70 chipset.

    The C1007UN-D from GIGABYTE features two DDR3 DIMM slots supporting up to 16 GB of dual-channel memory. Storage interfaces consist of one SATA 6 Gb/s and two SATA 3 Gb/s internal ports, and an eSATA 3 Gb/s port. Legacy PCI makes for the lone expansion slot. Connectivity includes two gigabit Ethernet interfaces, 6-channel HD audio, six USB 2.0 ports, an RS232 COM port, LPT (by header), and PS/2. Display outputs include D-Sub (VGA) and HDMI. GIGABYTE did not release pricing information, but considering the CPU itself is priced around $90, we expect this board to be priced around $150.

    [​IMG] [​IMG] [​IMG]
     
  2. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,873 (11.07/day)
    Thanks Received:
    13,716
    Location:
    Hyderabad, India
    Instead of wasting board space on a PCI and its required bridge chip (just below the DIMM slots), they should have just gone with an open-ended PCIe x4. Maybe this board is all about legacy connectivity.
     
  3. james888

    james888

    Joined:
    Jun 27, 2011
    Messages:
    4,667 (3.73/day)
    Thanks Received:
    1,879
    Maybe even two models, one with legacy pci, and one with pciex4.
     
    Crunching for Team TPU
  4. TheLostSwede

    TheLostSwede

    Joined:
    Nov 11, 2004
    Messages:
    933 (0.25/day)
    Thanks Received:
    164
    Can't argue with that...
     
  5. McSteel

    McSteel

    Joined:
    Nov 19, 2012
    Messages:
    632 (0.85/day)
    Thanks Received:
    305
    Then where's the IDE (PATA) connector that's clearly silkscreened on the board? Perhaps on another version/revision of the board?
     
  6. Frick

    Frick Fishfaced Nincompoop

    Joined:
    Feb 27, 2006
    Messages:
    10,899 (3.41/day)
    Thanks Received:
    2,417
    Nice to see dual nic's.
     
  7. TheLostSwede

    TheLostSwede

    Joined:
    Nov 11, 2004
    Messages:
    933 (0.25/day)
    Thanks Received:
    164
    That would be the GA-C1007UN - http://www.gigabyte.com/products/product-page.aspx?pid=4496

    Apparently there are two SKUs, with or without IDE
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page