hello i was wondering if anyone else is getting ATI Crossfire Disabled (crossfire available) in gpu-z, ive set it already in CCC to use overdrive and enable crossfire with a clock of 800/1100 for both cards, and when i test games and furmark and 3dmark06 i see first 4870 go to 800 core but the 2nd card is always at its idle 500/1100, only the first card goes to overdrive, i might be thinking that my crossfire is not enabled but when i use the overdrive core adjustments and test it it goes up to 800, anyone can shed light to this? thanks
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
GPU-Z and 4870 cf
- Thread starter jlodvo
- Start date
Rulez
New Member
- Joined
- Sep 14, 2008
- Messages
- 1 (0.00/day)
| System Name | Rulez' System |
|---|---|
| Processor | Intel Core 2 Quad Q6600 @ 2.4Ghz |
| Motherboard | ASUS Maximus Formula |
| Cooling | Thermalright Ultra 120 eXtreme + SilverStone FM121 120 mm |
| Memory | Corsair Twin2X Dominator 4 GB DDR2-1066 CL5 DHX kit |
| Video Card(s) | 2x Sapphire Radeon HD 4870 512 MB |
| Storage | Samsung Spinpoint F1 750 GB SATA2 + 3x Samsung Spinpoint F1 500 GB SATA2 |
| Display(s) | Iiyama E2403WS-B1 + BenQ FP91GX |
| Case | Cooler Master CM 690 |
| Audio Device(s) | SoundMAX onboard 7.1 |
| Power Supply | Zalman ZM750-HP |
| Software | Windows Vista Ultimate x64 |
| Benchmark Scores | 3DMark Vantage - 13205 3DMark 05 - 22137 3DMark 06 - 18328 3DMark 2001 Nature - 649.6 Cineben |
Overdrive settings x2
If you have CrossfireX enabled, you should see 2 cards in the list of ATI Overdrive. You can set the clock speeds of them seperately.
If you have CrossfireX enabled, you should see 2 cards in the list of ATI Overdrive. You can set the clock speeds of them seperately.
Italia 1
New Member
- Joined
- Dec 20, 2008
- Messages
- 3 (0.00/day)
| Processor | Phenom II x4 940 |
|---|---|
| Motherboard | Asus M3A79-T deluxe |
| Cooling | Original |
| Memory | 8GB ddr2 |
| Video Card(s) | 2x Asus EAH 4870x2 |
| Storage | 1x200GB + 2x500GB raid 0 |
| Display(s) | Samsung 245B |
| Case | Coller Master Stacker |
| Audio Device(s) | Onboard |
| Power Supply | Corsair HX1000w |
| Software | Windows 7 64 |
Hi, i've 2 asus 4870x2 and gpu-z see only Crossfire with 2 card (if i remove 1 card, it see always 2 card. is it normal?) CrossfireX enabled via driver