cdawall
where the hell are my stars
- Joined
- Jul 23, 2006
- Messages
- 27,680 (4.27/day)
- Location
- Houston
System Name | All the cores |
---|---|
Processor | 2990WX |
Motherboard | Asrock X399M |
Cooling | CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL |
Memory | 4x16GB G.Skill 3600 |
Video Card(s) | (2) EVGA SC BLACK 1080Ti's |
Storage | 2x Samsung SM951 512GB, Samsung PM961 512GB |
Display(s) | Dell UP2414Q 3840X2160@60hz |
Case | Caselabs Mercury S5+pedestal |
Audio Device(s) | Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood |
Power Supply | Seasonic Prime 1200w |
Mouse | Thermaltake Theron, Steam controller |
Keyboard | Keychron K8 |
Software | W10P |
Decided to do a project log for this one finally. Not doing anything major in this one just going to do a dual loop kind of.
Specs for the rig
Phenom 910 RB-C2
Asus Crosshair III
HIS 3870X2+Sapphire 3870X2
Thermaltake TR2 RX-850 (the good CWT built one)
Plan as of now is to mod the stock coolers on the 3870s to hold waterblocks i have 4 Tt ones on the way they are cheapies and might be replaced later on in the build. i am going to remove the factory copper and alum heatsinks over the GPU's and punch 4 holes in the plastic shroud for the tubes. those are going to all be cooled by a single 360 or 240 have not decided on that yet pump will be an old MCP350 with the silencer, res is a tecnofront micro going to use black 3/8 ID neoprene tubing. the cpu will be cooled by a Corsair H50 with fans in Push/Pull i already have this so its just getting put in. everything will be sleeved black. doing the traditional red lighting in the case. I already installed 2 12" cold cathodes and have the stock front red LED fan installed going to be adding 2 more 12"s and 2 4" red cold cathodes as well this should give a good even lighting in the case.
photos:
Specs for the rig
Phenom 910 RB-C2
Asus Crosshair III
HIS 3870X2+Sapphire 3870X2
Thermaltake TR2 RX-850 (the good CWT built one)
Plan as of now is to mod the stock coolers on the 3870s to hold waterblocks i have 4 Tt ones on the way they are cheapies and might be replaced later on in the build. i am going to remove the factory copper and alum heatsinks over the GPU's and punch 4 holes in the plastic shroud for the tubes. those are going to all be cooled by a single 360 or 240 have not decided on that yet pump will be an old MCP350 with the silencer, res is a tecnofront micro going to use black 3/8 ID neoprene tubing. the cpu will be cooled by a Corsair H50 with fans in Push/Pull i already have this so its just getting put in. everything will be sleeved black. doing the traditional red lighting in the case. I already installed 2 12" cold cathodes and have the stock front red LED fan installed going to be adding 2 more 12"s and 2 4" red cold cathodes as well this should give a good even lighting in the case.
photos: