- Joined
- Dec 6, 2005
- Messages
- 10,881 (1.63/day)
- Location
- Manchester, NH
System Name | Senile |
---|---|
Processor | I7-4790K@4.8 GHz 24/7 |
Motherboard | MSI Z97-G45 Gaming |
Cooling | Be Quiet Pure Rock Air |
Memory | 16GB 4x4 G.Skill CAS9 2133 Sniper |
Video Card(s) | GIGABYTE Vega 64 |
Storage | Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue |
Display(s) | 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC* |
Case | Rosewill |
Audio Device(s) | Onboard + HD HDMI |
Power Supply | Corsair HX750 |
Mouse | Logitech G5 |
Keyboard | Corsair Strafe RGB & G610 Orion Red |
Software | Win 10 |
The left picture is the better of the two. Either way you could feed a little more solder in there. But either of those connections would technically be fine. Try a little faster solder feed next time.
try a little more flux and little solder.
The left one does look great. The right is a little light on the solder, but still looks like it'll hold well.
That flux is old. So old it dried out. Flux should be goopy like jelly.
That does look old and dried out! The stuff I've used has been more like paste.