1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Help Please. GPU-Z and LCDSirReal Multi GPU - How to implement this

Discussion in 'GPU-Z' started by darkblood251, Apr 17, 2014.

  1. darkblood251 New Member

    Joined:
    Apr 17, 2014
    Messages:
    1 (0.01/day)
    Thanks Received:
    0
    Hi,

    Sorry to revive an old thread, but I am currently trying to implement this. I have dual ati radeon 6970m cards and want to display temps and information from each gpu separately using lcdSirReal on my logitech g13.

    First, I was wondering if the newest version of GPU-Z supports the command line option mentioned in this thread.

    http://www.techpowerup.com/forums/threads/gpu-z-and-lcdsirreal-multi-gpu.138555/

    If I read this correctly I believe:
    The first instance of gpuz would be gpuz.exe -minimize -card 1 (which selects the first card, or do I need to specify that somewhere in the program?)
    The second instance would be gpuz.exe -minimize -card 2 (which selects the second card, or do I need to specify that somewhere in the program?)

    Next I was wondering what to input into the lcdsirreal.txt file to specify to read from gpuz.exe card 1 instance and gpuz.exe card 2 instance. Here is what it looks like:

    ##############################################################################
    # slot_0
    # slot_1
    # slot_2
    # slot_3
    #
    # Select what modules should be shown in which slot. You can list more than
    # one module per slot, and the first one that has data to display will
    # be shown. To see any others, hold down CTRL while clicking the slot button
    # to cycle the selected module.
    #
    # You can show the same module in several slots at the same time. They will
    # behave as expected; for example, the NET module could show IN data in one
    # slot and OUT data in another, and TOT in a third.
    #
    # For some modules (CPU, NET, CLK, FAN, AMP, STW) you can select what it will
    # show initially. Append one or more plus signs (+) at the end of the three
    # letter acronym. Each plus sign equals one mode change (one click on the
    # button).
    #
    # For any module, you can simulate an initial long-click by adding a
    # multiplication sign (*) after the three-letter acronym. This can be used
    # to, for example, have the AMP or TUN modules start up always showing the
    # title.
    #
    # The following modules are allowed:
    #
    # CLK
    # Show the world clock. Click to change timezone.
    # STW
    # Stopwatch with lap time. Click to start/lap, long-click to stop/reset.
    # SPK
    # Shows speaker setting, volume, mute. Allows speaker switching
    # with a click. (Note: Windows Vista only allows changing speaker
    # settings using the Control Panel).
    # TS2
    # TeamSpeak2 running: Shows mic status, player count (server with small
    # font, current channel with large font) and will display current
    # speakers and people joining and leaving the server. Click to mute and
    # unmute mic. Long-click to show players in current channel.
    # AMP
    # WinAMP running: Shows current bitrate and time remaining (or time
    # elapsed if time remaining is not available.) when the current song
    # changes, shows the title in the log area. Click to show the currently
    # playing song. Long click to toggle constant display of song title.
    # NET
    # Shows network history the last ten seconds, or totals. Click to
    # change displays between OUT, IN and TOT.
    # FPS
    # FRAPS running: Shows the current FPS count if it isn't zero.
    # FAN
    # SpeedFan running: Show the current selected fan_mode display.
    # If fan_cycle is nonzero, iterate across the available modes.
    # Click to change the mode manually. Long-click to enable and
    # disable auto-cycle.
    # COR
    # CoreTemp running: show highest and the average core temperatures.
    # GPU
    # GPU-Z running: show sensor data. Click to switch sensor. Long
    # click to show current sensor name. Note that the GPU-Z option
    # 'Continue refreshing this screen...' option must be on.
    # TUN
    # ITunes running: Shows average bitrate and time remaining (or time
    # elapsed if time remaining is not available.) when the current song
    # changes, shows the title in the log area. Click to show the currently
    # playing song.
    # RIP
    # Nonresponsive program detected: Shows the first few characters of
    # the window title. Click to display the entire window name.
    # Long-click to terminate the nonresponsive program.
    # CPU
    # Shows detailed data from CPU and memory. Top right shows average
    # CPU load over the last second. Click to cycle between individual
    # CPU core loads (up to 32), CPU load histogram, and memory info.
    # Long click to show LCDSirReal's uptime, average CPU usage over
    # time, and memory consumption.

    slot_0 COR
    slot_1 GPU
    slot_2 GPU
    slot_3 RIP TUN

    ##############################################################################

    I was going to ask on the LCDSirReal forum, but unfortunately the application is no longer supported and the forum is quite barren. Hopefully I can get some help here. In the thread I posted earlier it seems the people there figured out how to do it.

    Thanks!
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page