- Joined
- Jan 28, 2007
- Messages
- 186 (0.03/day)
| System Name | Gaming PC from bestby |
|---|---|
| Processor | I7 |
| Motherboard | Ibuypower |
| Cooling | Stock |
| Video Card(s) | Nvidia 3080 |
| Storage | 1TB shared with windows 11 and FerenOS |
| Display(s) | MPG ARTYMIS 323CQR |
| Case | nice big case with rainbow fans allover it |
| Audio Device(s) | realtech |
| Software | OS is Windows 7 home premium, sometimes I use linux mint mate or sabayon both live |
| Benchmark Scores | CL-RCD-RP-RAS Write Speed 2x DDR3-1333 SDRAM 9-9-9-23 CR1 10484 MB/s |
I almost had an $80 piece of plastic,
I wasnt able to format or explore, when I was in linux I noticed the USB stick size was 0 and the name said Phison.
If you have a Phison chip like me this should be reflected here: String Manufacturer Name=TOSHIBA
I used Phison MPALL v3.63.00.. not the 3.63.0C or the 3.63.0c-DL17
Plug into a usb3.0 port.. this is critical. YOU MUST USE USB3
Copy the contents between the ===== to a new file named 2014_2251-03.ini
===========================================
[PenDriveMP]
IC Type=PS2251-03
[Parameter Mark]
Parameter Type=F1_MP_21
[Customize Info]
USB VID=0x0930
USB PID=0x1400
String Product Name=USB DISK 3.0
String Manufacturer Name=TOSHIBA
Inquiry Version=PMAP
Use30Fixture=1
IDBlkLibrary_Version=1.2.16.0
[Configuration]
Reset Serial Number=0
[TestItemOption]
Do Preformat Test=1
[Extra]
Mode=3
[Misc]
Volume Label=USB DISK
Burner Erase All=1
Wafer Erase All=1
set1667=0x00
[Advance]
FC1=0xFF
FC2=0x01
CheckLegacy=1
[Firmware]
ISP=0
===========================================
source: http://whatrevitwants.blogspot.sg/2011/06/repurposing-autodesk-usb-media_20.html
I wasnt able to format or explore, when I was in linux I noticed the USB stick size was 0 and the name said Phison.
If you have a Phison chip like me this should be reflected here: String Manufacturer Name=TOSHIBA
I used Phison MPALL v3.63.00.. not the 3.63.0C or the 3.63.0c-DL17
Plug into a usb3.0 port.. this is critical. YOU MUST USE USB3
Copy the contents between the ===== to a new file named 2014_2251-03.ini
===========================================
[PenDriveMP]
IC Type=PS2251-03
[Parameter Mark]
Parameter Type=F1_MP_21
[Customize Info]
USB VID=0x0930
USB PID=0x1400
String Product Name=USB DISK 3.0
String Manufacturer Name=TOSHIBA
Inquiry Version=PMAP
Use30Fixture=1
IDBlkLibrary_Version=1.2.16.0
[Configuration]
Reset Serial Number=0
[TestItemOption]
Do Preformat Test=1
[Extra]
Mode=3
[Misc]
Volume Label=USB DISK
Burner Erase All=1
Wafer Erase All=1
set1667=0x00
[Advance]
FC1=0xFF
FC2=0x01
CheckLegacy=1
[Firmware]
ISP=0
===========================================
source: http://whatrevitwants.blogspot.sg/2011/06/repurposing-autodesk-usb-media_20.html
Last edited:
