CAPSLOCKSTUCK
Spaced Out Lunar Tick
- Joined
- Feb 26, 2013
- Messages
- 8,578 (2.11/day)
- Location
- llaregguB...WALES
System Name | Party On |
---|---|
Processor | Xeon w 3520 |
Motherboard | DFI Lanparty |
Cooling | Big tower thing |
Memory | 6 gb Ballistix Tracer |
Video Card(s) | HD 7970 |
Case | a plank of wood |
Audio Device(s) | seperate amp and 6 big speakers |
Power Supply | Corsair |
Mouse | cheap |
Keyboard | under going restoration |
Friends, i am after some advice from anyone with woodworking and case building skills.
I make stuff from timber and a lot of stuff in my house is made from wood, quite a bit of it made by me.
I got hold of some gorgeous Canadian Maple flooring from a sprung dance floor from the 50's.
The strips are long and 50mm wide by 20mm deep.
i redid all of our kitchen units and they look fantastic, the grain of the wood looks lovely
I enjoy building pcs and i think i could do a good job of making a nice case.
Ive got all the bits including a Shuttle PSU
So my questions are
1. Do i need a MOBO backplate ? or what safe alternatives could i consider. (earthing etc)
2. Is heat going to cause problems ? I only want one visible fan and i am inclined to use this PS3 one
It probably wont be too efficient but i like the look of wood and metal not wood and plastic.
3. The MOBO is a Gigabyte GA h 61 m ds 2 and is socket 1155 so i am also considering ditching the shitty gpu ( 9500 gtx i think ) and getting a 1155 chip with hd onboard, any suggestions ?
This would make the whole case narrower and consequently easier/ quicker to build.
Any thoughts or experience that you could share would be appreciated.
Thanks in advance.
Or maybe just modify this french wine box
Clear perspex though and some snazzy lights inside. all that is a long way off.
I make stuff from timber and a lot of stuff in my house is made from wood, quite a bit of it made by me.
I got hold of some gorgeous Canadian Maple flooring from a sprung dance floor from the 50's.
The strips are long and 50mm wide by 20mm deep.
i redid all of our kitchen units and they look fantastic, the grain of the wood looks lovely
I enjoy building pcs and i think i could do a good job of making a nice case.
Ive got all the bits including a Shuttle PSU
So my questions are
1. Do i need a MOBO backplate ? or what safe alternatives could i consider. (earthing etc)
2. Is heat going to cause problems ? I only want one visible fan and i am inclined to use this PS3 one
It probably wont be too efficient but i like the look of wood and metal not wood and plastic.
3. The MOBO is a Gigabyte GA h 61 m ds 2 and is socket 1155 so i am also considering ditching the shitty gpu ( 9500 gtx i think ) and getting a 1155 chip with hd onboard, any suggestions ?
This would make the whole case narrower and consequently easier/ quicker to build.
Any thoughts or experience that you could share would be appreciated.
Thanks in advance.
Or maybe just modify this french wine box
Clear perspex though and some snazzy lights inside. all that is a long way off.
Last edited by a moderator: