1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Lian Li launches ARMORSUIT PC-P50 Gaming Mid Tower Chassis

Discussion in 'News' started by btarunr, Apr 10, 2009.

  1. btarunr

    btarunr Editor & Senior Moderator Staff Member

    Joined:
    Oct 9, 2007
    Messages:
    28,713 (11.15/day)
    Thanks Received:
    13,670
    Location:
    Hyderabad, India
    Lian-Li Industrial Co. Ltd has launched the ARMORSUIT SERIES PC-P50 Mid Tower chassis ideal for gaming systems. The hair-line brushed all aluminum chassis features advanced thermal dynamics, using one fan on the front (1x 120mm@1200RPM), plus dual vibration reduced top mounted fans (2x 140mm@1000RPM) and one rear 120mm@1500RPM extraction fan. The 8x PCI expansion slots enable CrossFireX and Tri-SLI graphic card setups. The chassis front face has 9x 5.25”ODD bays which have filters that are washable. The front panel clips off easily and conveniently. The entire chassis is designed for tool-less implementation, so installing your hardware and getting your syst em up and running is extremely quick and easy. The dimensions stand at 210x490x490mm (W, H, D). The top and front panels are clipped via special plastic kits which reduce metal on metal contact wear as well as prevent vibration.

    [​IMG] [​IMG] [​IMG]

    Complete Tool-Less Design
    The first of its kind unique Power Supply Bracket allows the PSU to be secured using only the tool-less clasp which is ideal to hold the PSU securely without the need for securing screws. The 9x ODD 5.25” bays have a patented mounting bar which secures your optical drives safely and securely. The PCI brackets made of solid aluminum have a special tool-less clip to secure your graphics and daughter cards with the utmost of ease. Similarly the HDD drives are secured in a tool-less bracket and mounted with rubber grommet struts to prevent movement and vibration from today’s fast moving and highly specialized HDD components. The front panel and top panel are easily detachable for access to fans and air filters. The ARMORSUIT PC-P50 chassis is imbued with all the functional and user friendly design aspects users have co me to expect in a Lian Li case.

    Thermal features
    Lian Li engineers have optimized the airflow to enter from the front mounted fans, directly cooling the HDD’s and ODD’s and thereafter refreshing the CPU region. The hot air generated by the CPU and GPU is directly extracted via the rear 120mm Fan and the dual top mounted fans. Both top mounted fans have special vibration free kits, which allow for silent operation as well as easy and safe removal of the fans should you wish to do so. The volume of airflow is more than sufficient to keep your gaming rig cool and conveniently silent.

    General features
    The chassis supports 9x 5.25” Optical drive bays with one optional 1x 3.5” external and 4 additional internal 3.5” bays for HDD’s in an anti-vibration movable cage. Each HDD has its own clip in bracket. The ARMORSUIT PC-P50 case is for Micro-ATX or ATX motherboards and has 8 PCI expansion slots, which are well ventilated with special vented brackets when not in use. The top panel is removable with the multimedia I/O ports on the top panel consisting of 2x USB2.0 as well as HD+AC97 Audio. The PSU has an advanced flame-retardant vent built into the bottom of the chassis. This uniquely designed vent prevents the possibility of heat and flames from exiting your case via the vent should something catastrophic like a short circuit occur to your PSU or other equipment inside.

    Traditional Durability
    The classical stylish functional design is the Lian Li goal. The essence of Lian Li products is the craftsmanship of the engineering. Intrinsic to the workmanship and quality is the customization which includes a whole host of optional extras that can be purchased to add more features to an already feature rich product.

    For more details on features and extras available for the ARMORSUIT PC-P50 please go to the Lian Li website here.
     
  2. KieranD

    KieranD

    Joined:
    Aug 16, 2007
    Messages:
    8,039 (3.06/day)
    Thanks Received:
    820
    Location:
    Glasgow, Scotland
    looks like my nzxt tempest, except a bit more ugly and 90s looking

    as its a lian li it will probly be high quality

    one thign i noticed is that the usb and buttons are not angled like the tempest they are straight which i dont like :(

    decent case tho if i say so even if the badge and design looks 90s
     
  3. BumbleBee

    BumbleBee

    Joined:
    Mar 6, 2009
    Messages:
    4,894 (2.38/day)
    Thanks Received:
    1,320
    Location:
    Cybertron aka Canada
    Kieran you actually like the looks of NZXT cases? you worry me. was hoping they would have the usual flip cover for the front ports. I wonder if the top 140mm fans can be replaced with 120mm. this case has to be at least $250 :( thanks for this bta.
     
  4. crtecha

    crtecha New Member

    Joined:
    Dec 8, 2008
    Messages:
    2,407 (1.12/day)
    Thanks Received:
    207
    Location:
    ipsay meechigan
    ehhh......... i bet it has awesome cable management ability.
     
  5. BumbleBee

    BumbleBee

    Joined:
    Mar 6, 2009
    Messages:
    4,894 (2.38/day)
    Thanks Received:
    1,320
    Location:
    Cybertron aka Canada
    it has that rubber clip at the bottom but I don't see much room behind the motherboard tray to route cables :(
     
  6. crtecha

    crtecha New Member

    Joined:
    Dec 8, 2008
    Messages:
    2,407 (1.12/day)
    Thanks Received:
    207
    Location:
    ipsay meechigan
    From the pictures it looks like there is atleast as much room as my 900. I was more soo referring to the extra holes in the mobo tray. I like seeing that.
     
  7. BumbleBee

    BumbleBee

    Joined:
    Mar 6, 2009
    Messages:
    4,894 (2.38/day)
    Thanks Received:
    1,320
    Location:
    Cybertron aka Canada
    it looks like you have to take the right side panel off, route the cables so the headers fit, slide the right side panel back on. however some cables are really thick and it looks like you can only fit a cable a little thicker than a SATA. this clearance issue is probably because the panels are dual layer.

    [begin Lian Li rant]
    aluminum cases look nicer and weigh less most of us are not going to take a full tower to a LAN but thats all they don't transfer heat better than steel cases (unless were talking about heatsinks thats a different story) they also have higher acoustics than steel cases which is why Lian Li goes the extra mile with dual layer panels, anti-vibration grommets, brackets and clips. you didn't think they did it out of the kindness of their hearts?
    [/end Lian Li rant]

    can't wait to see the new Lancool lineup :)
     
    Last edited: Apr 10, 2009
  8. crtecha

    crtecha New Member

    Joined:
    Dec 8, 2008
    Messages:
    2,407 (1.12/day)
    Thanks Received:
    207
    Location:
    ipsay meechigan
    Yeah I was looking for some pictures soo I could see it from a better angle. Ohh well.... there will be a new one tomorrow to pick on :roll:
     
  9. alucasa

    alucasa

    Joined:
    Apr 2, 2009
    Messages:
    706 (0.35/day)
    Thanks Received:
    94
    Location:
    Waterdown, Canada
    That case ... looks awfully similar.
     
  10. Shadin

    Shadin New Member

    Joined:
    Apr 10, 2009
    Messages:
    53 (0.03/day)
    Thanks Received:
    7
    Tool-Less Design, gah!

    Stop with the tool-less designs on gaming cases! Antec had it right on the 900/1200, use the basic screws to mount everything. My biggest complaint with my P182 is the stupid tool-less rails makes it a challenge to mount anything in the 5.25" bays except for optical drives or items with a similar size/shape.

    Otherwise, it looks like a decent case, but I'm sure Lian-Li will want $300 for it and it's certainly not twice as good as a 1200.
     
  11. SNiiPE_DoGG New Member

    Joined:
    Apr 2, 2009
    Messages:
    582 (0.29/day)
    Thanks Received:
    135
    uhhh no, this case will not be $300.... try like 200 tops at launch

    about the tool-less, IDK if you have seen those PCI clips in action but they are the best designed tooless clips I have ever seen. overly robust and very snazzy looking
     
  12. Shadin

    Shadin New Member

    Joined:
    Apr 10, 2009
    Messages:
    53 (0.03/day)
    Thanks Received:
    7
    The PCI clips are all right, but I'm talking more about the drive designs. For the sake of being able to mount anything in the drive bays (coolers, etc), having the standardized screw holes saves a lot of modding time. And yes, the $300 statement was an exaggeration, but it depends on where they drop it in their lineup. The ArmorSuit is $229, it'd be cool if this was less, but I won't be surprised if they launch it for more.
     
  13. EaGle1337

    EaGle1337 New Member

    Joined:
    Oct 1, 2008
    Messages:
    81 (0.04/day)
    Thanks Received:
    4
    Location:
    Canada
    looky looky some one took an idea from cooler master
     
  14. KieranD

    KieranD

    Joined:
    Aug 16, 2007
    Messages:
    8,039 (3.06/day)
    Thanks Received:
    820
    Location:
    Glasgow, Scotland
    i wouldnt have the nzxt tempest if i didnt like it would i?

    too many cases lol lots of nice choices coolermaster haf is nice but pricey
     
  15. zCexVe

    zCexVe

    Joined:
    Apr 25, 2007
    Messages:
    417 (0.15/day)
    Thanks Received:
    30
    Location:
    Los Angeles,CA
    I always liked those Cooler master stacker 83x casings.They are my favorites.And antec too.
     
  16. Hayder_Master

    Hayder_Master

    Joined:
    Apr 21, 2008
    Messages:
    5,177 (2.18/day)
    Thanks Received:
    638
    Location:
    IRAQ-Baghdad
    im made a chose for me , no mid case is gaming case
     
  17. kaskuli

    kaskuli New Member

    Joined:
    Oct 10, 2008
    Messages:
    18 (0.01/day)
    Thanks Received:
    0
    Now we're talking... I like it.
     
  18. roofsniper New Member

    Joined:
    Dec 14, 2007
    Messages:
    42 (0.02/day)
    Thanks Received:
    2
    i have looked at every computer case there is many times. the only case i like is my nzxt alpha which i have modded. i like some other cases too but none of them i would consider buying. they all look nice but the features suck or they look bad but have good features. if you ask me from what i see here this looks like one nice case. sleek design, 2 top mounted 140 fans, 120 for intake and 120 for exhaust, bottom mount psu, wire management looks good, access to the back of the cpu area so you dont have to remove the motherboard for new heatsinks. then it looks like you can add more fans into the front if you buy the parts. it just all looks good. although i like all my cases to have windows on them i might still get this one and maybe add one later. id like to see a review on this thing. anyone got any more pics?
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page