- Joined
- Aug 29, 2005
- Messages
- 7,061 (1.04/day)
- Location
- Asked my ISP.... 0.0
System Name | Lynni PS \ Lenowo TwinkPad T480 |
---|---|
Processor | AMD Ryzen 7 7700 Raphael \ i7-8550U Kaby Lake-R |
Motherboard | ASRock B650M PG Riptide Bios v. 2.02 AMD AGESA 1.1.0.0 \ Lenowo 20L60036MX Bios 1.47 |
Cooling | Noctua NH-D15 Chromax.Black (Only middle fan) \ Lenowo WN-2 |
Memory | G.Skill Flare X5 2x16GB DDR5 6000MHZ CL36-36-36-96 AMD EXPO \ Willk Elektronik 2x16GB 2666MHZ CL17 |
Video Card(s) | Asus GeForce RTX™ 4070 Dual OC GPU: 2325-2355 MEM: 1462| Nvidia GeForce MX™ 150 2GB GDDR5 Micron |
Storage | Gigabyte M30 1TB|Sabrent Rocket 2TB| HDD: 10TB|1TB \ SKHynix 256GB 2242 3x2 |
Display(s) | LG UltraGear 27GP850-B 1440p@165Hz | LG 48CX OLED 4K HDR | AUO 14" 1440p IPS |
Case | Fractal Design Meshify 2 Tempered Glass White/Black | Lenowo T480 chassis |
Audio Device(s) | Steelseries Arctis Pro Wireless |
Power Supply | Be Quiet! Pure Power 12 M 750W Goldie | 65W |
Mouse | Logitech G305 Lightspeedy Wireless | Lenowo TouchPad & Logitech G305 |
Keyboard | Akko 3108 DS Horizon V2 Cream Yellow | T480 UK Lumi |
Software | Win11 Pro 23H2 UK |
Benchmark Scores | 3DMARK: https://www.3dmark.com/3dm/89434432? GPU-Z: https://www.techpowerup.com/gpuz/details/v3zbr |
oki, i am running the newest bios for my MSI Z87I Gaming AC which is v1.4 and my problem is if i touch anything in the OC menu XMP or just change voltage just a little the board don't reboot after clicking on "save and reboot" it just stands there doing nuth until i hold the power button down til my computer turns off.
On the first run when i booted with my new cpu i changed XMP to profile 1 so my Mushkin Redline memory was running 2400mhz at 10-12-12-28 and i started up no problems, then i tried messing a little with volts to see what i could go down to but changed it back to auto bcs i don't have much more time to mess with it for awhile.
Link to my Mushkin blocks: http://poweredbymushkin.com/catalog/item/5-redline/810-992122
had a few Windows 8.1 start up hiks nuth major, but all suddenly now when i activate XMP and volts should go up to 1.65V it says at 1.504V and my system refuses to boot and i get this message:
All settings were reset to default values.
The previous overclock settings have failed, system has been restored to it's default settings.
Press F1 to run setup.
Press F2 to load fault values and run setup.
i know that's bcs OC failed but i can't seem to figure out why my board don't do the correct voltage for my memory on auto with XMP or manually with XMP enabled, is my board half dead or something
On the first run when i booted with my new cpu i changed XMP to profile 1 so my Mushkin Redline memory was running 2400mhz at 10-12-12-28 and i started up no problems, then i tried messing a little with volts to see what i could go down to but changed it back to auto bcs i don't have much more time to mess with it for awhile.
Link to my Mushkin blocks: http://poweredbymushkin.com/catalog/item/5-redline/810-992122
had a few Windows 8.1 start up hiks nuth major, but all suddenly now when i activate XMP and volts should go up to 1.65V it says at 1.504V and my system refuses to boot and i get this message:
All settings were reset to default values.
The previous overclock settings have failed, system has been restored to it's default settings.
Press F1 to run setup.
Press F2 to load fault values and run setup.
i know that's bcs OC failed but i can't seem to figure out why my board don't do the correct voltage for my memory on auto with XMP or manually with XMP enabled, is my board half dead or something
Last edited: