My 9600

[mattthemodder]

My VGA silencer is in the mail. With the stock passive heatsink and an old 486 fan i've got it to 440 Core, 240 Mem.

I checked my memory, all I can remeber was that it was Samsung and was rated at 200 Mhz. Would it be safe to keep it a 240Mhz?

One more thing, what voltage is the fan on the Silencer, my card dosen't have a fan plug so im going to have to rig it up to a molex connector.

Thanks

 

[mattthemodder]

Ok it came and it turned out to be a Rev2, after some drilling a filing it fits fine. Any ideas on what my 200Mhz rated memory will take? I put ram sinks on and there hot to touch

 

[fr33ze]

use atitool mate, thats the easiest way to find out what the ram will be happy to take 24/7

 

[mattthemodder]

It did 20mins at 260Mhz, which im quite happy with

435 Core, 260 Mem...Not too bad

 

[kRaZeD]

i had samsung 200mhz ram, it did 270 without artifacts. 280 if i wanted minimal artifacts, and 290 if i wanted big ass triangles on my screen in Halo (9200SE it was)

 

[nightelf84]

It did 20mins at 260Mhz, which im quite happy with

435 Core, 260 Mem...Not too bad

20 mins is probably a bit too short to Find Max values. I wud leave it for 1 hour minimum just to be safe....

20 mins running AtiTool or 20 mins Find Max without artifacts?