my AMD personaly record-x6 1100T

[trickson]

how many watts is the tec wb?

You know ! 226w . At least I think it is it maybe 256w I can not remember . It is the swiftech one .

 

[cdawall]

You know ! 226w . At least I think it is it maybe 256w I can not remember . It is the swiftech one .

your chip at 5ghz 1.58v puts out 241watts you will be heating it up with that block its 226w

 

[trickson]

your chip at 5ghz 1.58v puts out 241watts you will be heating it up with that block its 226w

Yeah I know but it should hold till I get the validation ! Hell if he can get that on AIR I surely can with the TEC/WB . not like it will be benchmarking or any thing like that bro .

 

[fullinfusion]

Yeah I know but it should hold till I get the validation ! Hell if he can get that on AIR I surely can with the TEC/WB . not like it will be benchmarking or any thing like that bro .

TEC water block? what is that? pix?

 

[cdawall]

Yeah I know but it should hold till I get the validation ! Hell if he can get that on AIR I surely can with the TEC/WB . not like it will be benchmarking or any thing like that bro .

true however that TEC when used like you are saying will end up heating the cpu not cooling it as it can not dissipate the heat the cpu is produce 226w in idea conditions is how much heat that tec can remove that cpu will put out more heat than that.

TEC water block? what is that? pix?

http://www.overclockersclub.com/reviews/swiftech_mcw6500t/

been out forever

 

[trickson]

true however that TEC when used like you are saying will end up heating the cpu not cooling it as it can not dissipate the heat the cpu is produce 226w in idea conditions is how much heat that tec can remove that cpu will put out more heat than that.



http://www.overclockersclub.com/reviews/swiftech_mcw6500t/

been out forever

Yeah plus it is a pain in the ass to put in and all . Maybe just with my D-Tech wb.

 

[cdawall]

Yeah plus it is a pain in the ass to put in and all . Maybe just with my D-Tech wb.

i hit 4.58ghz on my old set up fuzion V1 no insert and poorly setup loop. current one is alot lower temps so im sure i would be able to hit 5+

 

[fullinfusion]

true however that TEC when used like you are saying will end up heating the cpu not cooling it as it can not dissipate the heat the cpu is produce 226w in idea conditions is how much heat that tec can remove that cpu will put out more heat than that.



http://www.overclockersclub.com/reviews/swiftech_mcw6500t/

been out forever

Thanks CD!
It seems to be a great cooling addition for an AMD chip, rather then the hot intel chip...

Hmmm... should I or shouldn't I

 

[cdawall]

Thanks CD!
It seems to be a great cooling addition for an AMD chip, rather then the hot intel chip...

Hmmm... should I or shouldn't I

read my other heating cpu up post

then read this
http://www.xtremesystems.org/forums/showthread.php?t=38367

 

[trickson]

read my other heating cpu up post

then read this
http://www.xtremesystems.org/forums/showthread.php?t=38367

Yeah this is one reason I took out that WB it just wasn't worth it really . Unless you get a huge 400w tech then it kinda is a waste .

 

[cdawall]

Yeah this is one reason I took out that WB it just wasn't worth it really . Unless you get a huge 400w tech then it kinda is a waste .

my plan is still to use my current loop to cool a huge tec setup i want 800+ watts lol

 

[trickson]

my plan is still to use my current loop to cool a huge tec setup i want 800+ watts lol

LOL I have been looking for a good TECH to replace the one in that WB but still haven't found one .

 

[fullinfusion]

LOL I have been looking for a good TECH to replace the one in that WB but still haven't found one .

Wanna trade TEC's? I have a coolit unit id trade ya... this is the unit but with the lines and bolck off and plumbed into my current water set up

 

[trickson]

Wanna trade TEC's? I have a coolit unit id trade ya... this is the unit but with the lines and bolck off and plumbed into my current water set up

http://img.techpowerup.org/110129/DSC00498.jpg

http://img.techpowerup.org/110129/DSC00499.jpg

Sure I would be glad to trade you my TEC/WB for your coolit !

 

[FlanK3r]

Hi guys, of course, its only validation, is impossible get 5 GHz stable with aircooling at all CPUs without Intel Sandy Bridge K version.
This x6 1100T is benchable at 4350 MHz in wprime or so. Others cores are not soo good as core 0. Example my older x6 1090T BE is crazy gold - 4400 MHz wprime 1024M at air, and this it for AMD good! I had some Denebs, 4 Thubans to this time in my hand and others are -200 to -150 MHz in stable clocks. Average between 4100-4150 MHz stable in LINX, only 1090T 1015 series is better-first CPUs 4200 MHz stable, second 4300 MHz air stable.
Denebs are in average whorse.All which I had was between 3950-4050 MHz stable, x4 970 4100 MHz. But new Denebs past 1040 weeks are great! I heard, some gold new Denebs can 4300-4400 MHz air stable!

 

[cdawall]

Hi guys, of course, its only validation, is impossible get 5 GHz stable with aircooling at all CPUs without Intel Sandy Bridge K version.
This x6 1100T is benchable at 4350 MHz in wprime or so. Others cores are not soo good as core 0. Example my older x6 1090T BE is crazy gold - 4400 MHz wprime 1024M at air, and this it for AMD good! I had some Denebs, 4 Thubans to this time in my hand and others are -200 to -150 MHz in stable clocks. Average between 4100-4150 MHz stable in LINX, only 1090T 1015 series is better-first CPUs 4200 MHz stable, second 4300 MHz air stable.
Denebs are in average whorse.All which I had was between 3950-4050 MHz stable, x4 970 4100 MHz. But new Denebs past 1040 weeks are great! I heard, some gold new Denebs can 4300-4400 MHz air stable!

4.5 stable on my 1090

 

[Goodman]

First in my life I got 5 GHz on AMD and still with aircooling, it was hard game....But here is it
http://valid.canardpc.com/cache/screenshot/1624216.png

http://valid.canardpc.com/show_oc.php?id=1624216

I am not first man in history with AMD and aircooling (MAD222 got about 5150 MHz with Deneb!), but 5 GHz aircooling club is only about a few people
M4A89GTD PRO/USB3
x6 1100T BE
Gelid Tranqiuillo
1x Corsair Dominator
tweaked windows XP

I am NOT! saying that this fake overclock but your CPU-z have bean rejected...
The same thing happen to me back when i had my old 240 @ 4.1ghz it was rejected by CPU-z but was ok at 4GHz or less never could figured it out why?

 

[Solaris17]

When's the last time you were chased by a cheetah?

life story

congrats on 5ghz

 

[cdawall]

I am NOT! saying that this fake overclock but your CPU-z have bean rejected...
The same thing happen to me back when i had my old 240 @ 4.1ghz it was rejected by CPU-z but was ok at 4GHz or less never could figured it out why?

Its from the overclock being completly unstable.

 

[Goodman]

Its from the overclock being completly unstable.

How would CPU-z knows?
It is not a stability test software but only an info about clock speed (mobo,ram,cpu)

 

[cdawall]

How would CPU-z knows?
It is not a stability test software but only an info about clock speed (mobo,ram,cpu)

there are errors in the validation because the cpu is unstable

 

[FlanK3r]

right, as said cadawall, example, this is correct:

http://valid.canardpc.com/show_oc.php?id=1624249

From yesterday benchmarking too.

4.5 GHz wattercooling sdtable is really impressive to! How much voltage? And what batch? My gold 1090T 4.3 GHz with 1.468V (aircooled), higher voltages helepd me not

 

[cdawall]

right, as said cdawall, example, this is correct:
http://valid.canardpc.com/cache/screenshot/1624249.png
http://valid.canardpc.com/show_oc.php?id=1624249

From yesterday benchmarking too.

4.5 GHz wattercooling sdtable is really impressive to! How much voltage? And what batch? My gold 1090T 4.3 GHz with 1.468V (aircooled), higher voltages helepd me not

4.5ghz took around 1.475-1.5v like yours volts only help until you hit the temps the chip becomes unstable. mine could run wprime/scm2/superpi etc.


oh and speaking of tecs....

early tec block designs internals based off of a maze 4

10"x10" block with copper top/bottom hot side finned top to help dissipate heat more so than just the rads blue is 120x38mm fans. the cold side will use acetal+copper so costs are not insane. reason for size is more efficiency i only plan a qmax of around 1500w but due to size i should be able to use more small tecs to increase surface area and in turn the cooling effects.

 

[FlanK3r]

And superpi 1M, I forgot at it ...

 

[trickson]

And what were the temps ?