- Joined
- Dec 10, 2007
- Messages
- 88 (0.01/day)
| Processor | QX9650, 4@1.36v 11x365 |
|---|---|
| Motherboard | Asus p45q-e |
| Cooling | Prolimatech Super Mega Cooler (Akasa Viper push/pull) |
| Memory | OCZ 8GB (4x2GB) PC2-6400C4 800MHz ReaperX HPC Enhanced Bandwidth Edition Dual Channel DDR2 |
| Video Card(s) | HIS 6970 ATI HD |
| Storage | 1TB |
| Display(s) | 30" dell 3008, 2x19" samsumg syncmaster |
| Case | Antec P180 |
| Audio Device(s) | PCI XFi SB |
| Power Supply | 800wat Tagan |
| Software | Windows 7 x64 |
| Benchmark Scores | 14500 3dmark 06 @ 2500x1600 8AA 22000 3dmark 06 @ defaults 4800 3dmark 11 @ defaults |
Hi guys and gals,
I am in at the overclocking stage of my Tom's Hardware budget overclock (see link to PC build discussion) I opted for the following essentials:
I have set the OCZ PC2-6400 ReaperX HPC Enhanced Bandwidth 4GB Dual Channel using the bios to the following:
tCL 4
tRCD 4
tRP 3
tRAS 10
tRFC 36
tWR 3
tWTR 3
tRRD 1
tRTP 3
Voltage 2.0
Now, i did get some good initial performance:
2741 PCMarks 1.8Ghz
3278 PCMarks 2.4Ghz
3784 PCMarks 3Ghz
But she started to hang. I think its the memory but cannot be sure. Any ideas on some 'stabler' settings?
I am in at the overclocking stage of my Tom's Hardware budget overclock (see link to PC build discussion) I opted for the following essentials:
[*]Intel Pentium® Dual-Core E2160 1.8GHz,
[*]OCZ DDR2 PC6400 4GB KIT, Reaper X HPC, 2x2048MB, Heat Pipe, (CL4-4-3-15), E.P.P
[*]OCZ Vendetta CPU Cooler Socket 754/939/940/AM2/775, 92mm Fan
[*]MSI P35 NEO2-FR, P35, Socket-775, DDR2, ICH9R, SATAII, ATX, GbLAN, 2xPCI-Ex16
I have set the OCZ PC2-6400 ReaperX HPC Enhanced Bandwidth 4GB Dual Channel using the bios to the following:
tCL 4
tRCD 4
tRP 3
tRAS 10
tRFC 36
tWR 3
tWTR 3
tRRD 1
tRTP 3
Voltage 2.0
Now, i did get some good initial performance:
2741 PCMarks 1.8Ghz
3278 PCMarks 2.4Ghz
3784 PCMarks 3Ghz
But she started to hang. I think its the memory but cannot be sure. Any ideas on some 'stabler' settings?
Last edited: