• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

non supported cpu

nora.e

New Member
Joined
May 25, 2007
Messages
245 (0.04/day)
Location
Boontullie MN.
Processor Core 2 Duo E8400
Motherboard Asus P5G41C-M
Cooling Stock
Memory 4gig (2 x 2048) Corsair XMS3 DDR3-1600
Video Card(s) Palit GTS 250
Storage Seagate Barracuda 320 gig SATA X2
Display(s) Asus VW222U 22" LCD
Case Rosewill R101-P-BK
Audio Device(s) Onboard
Power Supply CORSAIR CMPSU-550VX 550W
Software Windows XP Pro 32 bit
I've got an older Pentium 4 EE kicking around and thought I'd try to see how high I could oc it in my sys specs. The mobo saids it will support a Pentium EE. The fans and hdd came on but it would not boot.This was a missunderstanding on my part. The Pentium EE is in the Pentium D flavor, not the 4. Could this have trashed the cpu by trying to run it on a mobo that did not support it or will it just not work? :confused:
 
Joined
Mar 4, 2005
Messages
3,612 (0.52/day)
System Name TheReactor / HTPC
Processor AMD 7800x3d 5050Mhz / Intel 10700kf (5.1ghz All Core)
Motherboard ASrock x670e Taichi / ROG Strix z490-e gaming
Cooling HeatKiller VI CPU/GPU Block -2xBlackIce GTX 360 Radiators - Swiftech MCP655 Pump
Memory 32GB G.Skill 6000Mhz DDR5 / 32GB G.Skill 3400Mhz DDR4
Video Card(s) Nvidia 3090ti / Nvidia 2080ti
Storage Crucial T700 2TB Gen 5 / Samsung Evo 2Tb
Display(s) Acer Predator xb271hu - 2560x1440 @144hz
Case Corsiar 550
Audio Device(s) on board
Power Supply Antec Quattro 1000W
Mouse Logitech G502
Keyboard Corsair Gaming k70
Software Windows 10 Pro 64bit
Probably not. More then likely your motherboard just needs a bios update to support the chip.
 
Joined
Dec 6, 2005
Messages
10,881 (1.62/day)
Location
Manchester, NH
System Name Senile
Processor I7-4790K@4.8 GHz 24/7
Motherboard MSI Z97-G45 Gaming
Cooling Be Quiet Pure Rock Air
Memory 16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s) GIGABYTE Vega 64
Storage Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s) 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC*
Case Rosewill
Audio Device(s) Onboard + HD HDMI
Power Supply Corsair HX750
Mouse Logitech G5
Keyboard Corsair Strafe RGB & G610 Orion Red
Software Win 10
That board only has a 4-pin CPU power connector. The EE's are known to require an 8-pin connector - (very power hungry). It's either that, or you in fact need a bios update... but an older CPU like that should have been included in the first BIOS.
 

nora.e

New Member
Joined
May 25, 2007
Messages
245 (0.04/day)
Location
Boontullie MN.
Processor Core 2 Duo E8400
Motherboard Asus P5G41C-M
Cooling Stock
Memory 4gig (2 x 2048) Corsair XMS3 DDR3-1600
Video Card(s) Palit GTS 250
Storage Seagate Barracuda 320 gig SATA X2
Display(s) Asus VW222U 22" LCD
Case Rosewill R101-P-BK
Audio Device(s) Onboard
Power Supply CORSAIR CMPSU-550VX 550W
Software Windows XP Pro 32 bit
That board only has a 4-pin CPU power connector. The EE's are known to require an 8-pin connector - (very power hungry). It's either that, or you in fact need a bios update... but an older CPU like that should have been included in the first BIOS.

Sence trying it I've learned from the Intel sight that the only chip sets that will suport the P4EE are the 925X, 955X and the 975X. My concern is could I have done any damage to the cpu by installing it on a mobo that did not suport it?
 
Joined
Mar 4, 2005
Messages
3,612 (0.52/day)
System Name TheReactor / HTPC
Processor AMD 7800x3d 5050Mhz / Intel 10700kf (5.1ghz All Core)
Motherboard ASrock x670e Taichi / ROG Strix z490-e gaming
Cooling HeatKiller VI CPU/GPU Block -2xBlackIce GTX 360 Radiators - Swiftech MCP655 Pump
Memory 32GB G.Skill 6000Mhz DDR5 / 32GB G.Skill 3400Mhz DDR4
Video Card(s) Nvidia 3090ti / Nvidia 2080ti
Storage Crucial T700 2TB Gen 5 / Samsung Evo 2Tb
Display(s) Acer Predator xb271hu - 2560x1440 @144hz
Case Corsiar 550
Audio Device(s) on board
Power Supply Antec Quattro 1000W
Mouse Logitech G502
Keyboard Corsair Gaming k70
Software Windows 10 Pro 64bit
probably not...If anything it was undervolted.
 
Joined
Apr 5, 2005
Messages
6,771 (0.97/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
I don't think so. You EE should be fine. Unplug your computer from the power outlet. Open up your case and clear the cmos using the clearcmos jumper (study the manual). Wait for a minute, put back the jumper to normal position (again consult manual), double check, then plug to power outlet and turn on. It might come up.
 
Top