- Joined
- Jan 31, 2016
- Messages
- 12 (0.00/day)
- Location
- Hungary
Processor | I3 2100 |
---|---|
Motherboard | Asrock Z77 OC Formula |
Cooling | Water |
Memory | HyperX Fury Black DDR3 1333 |
Video Card(s) | Gigabyte GV-R938G1 GAMING-4GD |
Storage | Corsair ssd 60gb force 3 series |
Display(s) | Philips 277E6QDSD/27 |
Case | Raidmax Augusta |
Audio Device(s) | None |
Power Supply | EVGA Supernova G1 750W modular |
Mouse | A4 |
Software | Win10 64bit |
Welcome everyone. I am Zoli from Hungary. I apologize for my English is a little incomplete. I use Google Translate.
It's time I read the forum and now made up his mind to draw up an own CASECON.
Sponsors For now, no, but that will likely change.
The plan found here. Few restructuring plan on it.
For now, that's it, I'll soon be in the pictures.
The materials used in foamed PVC (Kömatex), glue, aluminum profile and a few screws.
Some pictures unfortunately missed the beginning.
But in the future it will no longer be missed.
Today I prepared the basis for the roof and side panels
The recording side panels, I found out that without screws, sliding method would fit into place.
The other day I made the top of the permanent establishment and the bottom of the grid ,, "also won the pre-final form of power.
I fixed up the top of the tablet holder ,, box. "I've been thinking that either horizontally or vertically to be this. Finally, the vertical won.
There are just waiting for the system board, it ssd 2 will be included. The VGA has become in question, it is likely that a non-aqueous, but will be painted in the fan.
It's time I read the forum and now made up his mind to draw up an own CASECON.
Sponsors For now, no, but that will likely change.
The plan found here. Few restructuring plan on it.
For now, that's it, I'll soon be in the pictures.
The materials used in foamed PVC (Kömatex), glue, aluminum profile and a few screws.
Some pictures unfortunately missed the beginning.
But in the future it will no longer be missed.
Today I prepared the basis for the roof and side panels
The recording side panels, I found out that without screws, sliding method would fit into place.
The other day I made the top of the permanent establishment and the bottom of the grid ,, "also won the pre-final form of power.
I fixed up the top of the tablet holder ,, box. "I've been thinking that either horizontally or vertically to be this. Finally, the vertical won.
There are just waiting for the system board, it ssd 2 will be included. The VGA has become in question, it is likely that a non-aqueous, but will be painted in the fan.