1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Oc Ram to 1866

Discussion in 'Motherboards & Memory' started by marcosamerio, Sep 25, 2011.

  1. marcosamerio

    Joined:
    Jul 27, 2011
    Messages:
    125 (0.11/day)
    Thanks Received:
    2
  2. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,671 (13.28/day)
    Thanks Received:
    14,066
    Nope! Perhaps 9-10-9-27 or 9-11-9-28 will work and if those RipjawX's use the same IC's as my Snipers you will most likely have to go to 10-10-10 while utilizing stock voltage.
     
  3. marcosamerio

    Joined:
    Jul 27, 2011
    Messages:
    125 (0.11/day)
    Thanks Received:
    2
    Hi, thanks a lot for answering me so quickly, ¿u said to increase to 9-10-9-27 2N to reach

    1866? ¿and voltage?, i see the same memories but in version 1866 and put 1.6v.

    http://www.gskill.com/products.php?index=362 (the memories i see)

    Bye
     
  4. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,671 (13.28/day)
    Thanks Received:
    14,066
    Yeah, give 1.6v a try. If it actually boots, it may work with a little more tweaking. :toast:
     
  5. marcosamerio

    Joined:
    Jul 27, 2011
    Messages:
    125 (0.11/day)
    Thanks Received:
    2
    Hi again, u are fast :D ¿what other tweak u said?

    Bye and thanks again
     
  6. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,671 (13.28/day)
    Thanks Received:
    14,066
    First you need to see if it will work. ;)
     
  7. marcosamerio

    Joined:
    Jul 27, 2011
    Messages:
    125 (0.11/day)
    Thanks Received:
    2
    Hi

    I put this TCL 9 TRCD 9 TRP 9 TRAS 27 TRC 36 TRFC 128 CMD 2N and 1.6 voltage and

    boot perfect on windows, now im running memtest to see if is stable, ¿what other things

    u recommend me to tweak or is enought with that setting i change?

    Bye and thanks for the help and tips
     
  8. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,671 (13.28/day)
    Thanks Received:
    14,066
    Well that's excellent! :toast: Now, test for stability using MemTest or Intel Burn Test (high memory). If it passes, you could try lowering the TRFC to 118 and possibly the CMD to 1N. Then test for stability again.

    Cheers!
     
  9. marcosamerio

    Joined:
    Jul 27, 2011
    Messages:
    125 (0.11/day)
    Thanks Received:
    2
    No luck at 1866 :banghead:, best i get with passing 2 times memtest+ was 1600 mhz @

    8-8-8-24-32-128-2N-1.5v, happy with this.

    Bye and thanks for all
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page