PLAYDOH SILVERSTONE TJ07 (acrylic tubing)

[arg-ist]

04.11.2014

PlayDoh Silverstone TJ07

A new worklog:

At this worklog ı use my old Silverstone TJ07. I call it as PlayDoh of the cases.I want to make 3 different cases from this case.

First worklog TJ07 V1

What I want to achieve are:

To combine front panel with the side window.
To install liquid cooling and achieving this via acrylic pipe.
To use a special distributor for water distribution as midplate.
To enlarge the case for radiators since it is not wide enough.
To stick some parts into the case to obtain a dynamic view

first 5.25 rotated

made a window at middileplate for water distributor

two 80 mm fan holes are used for pump and tops

The tops mounted on an alu plate

and the plate with tops mounted to the case

The pumps with modkit are sticked to the backpanel

OTHER WORKLOGS


Mac G5 Mod arg-ist

http://www.techpowerup.com/forums/threads/mac-g5-mod-arg-ist.207513/


TRANSFORMER CASE

http://www.techpowerup.com/forums/threads/transformer.204111/


Jumbo case- custom build-


http://www.techpowerup.com/forums/threads/jumbo-case-custom-build.205943/


4 way HDD switcher.


http://www.techpowerup.com/forums/threads/4-way-hdd-switcher.203795/


Grapich Equaliser display


http://www.techpowerup.com/forums/threads/graphic-equaliser-display.203871/


900 D MMT CASE


http://www.techpowerup.com/forums/threads/900-d-mmt-case.204028/


12 Angry Men 900 D Case


http://www.techpowerup.com/forums/threads/12-angry-men-900-d-case.203915/

 

[t_ski]

Subbed. I like the idea of mounting the pumps in the rear fan holes, as these fans are my least favorite thing about this case.

 

[manofthem]

Subbed

 

[arg-ist]

update 06.11.2014


To mount PSU ı made a window at the top.

Made a mounting kit to mount psu.

To cover the hole spaces around MB made these parts with gromets.

made 2 X360 Rad stands for rad mounting

 

[arg-ist]

update 12.11.2014

First meeting with acrylic pipes. I had worked before with glass pipes and Copper pipes.
But Acrylic was differnt. First experiments -how to measure -

Some tools to work. A plastic mieter box , a handsaw, and a file for the ends.

and some experiments to bend

İt was easy to bend L parts, but U and S parts was difficult.
Therefore I made m y bending table.
I can bend with different Radius and bend in 2 and 3 directions

and first experiments with acrylic pipes.

 

[Dicfylac]

Nice case,

Looking forward to see more.

 

[arg-ist]

update 14.11.2014



Fighting with acrylic tube…

I want to make a waterdistrubutor to this place as midplate

Planning waterdistrubutor

And some pics from acrylics

 

[arg-ist]

update 20.11.2014


I want to make a waterdistrubutor from acrylic to this place as midplate

Planning water distrubutor with acrylic pipes

And plan of diftrubutor at corel

You have two ways to cut plexis


1-With CNC Router

2- with CNC Laser

I used CNC laser

acrylic sheets from bottom to top.

No 1: 5mm milk White
No:2 10mm clear
No: 3 5mm clear
No: 4 2mm milk white

bonding acrylic sheets with cloroform.

dont use bits for metal use bits for wood..

 

[arg-ist]

UPDATE 03.12.2014


Fans were taken out to enlarge the case for 2x Thermochill 360 rads

I made a radiator shroud for fans and used a phobya 3x rad. Gril.

This was applied on the back cover.

Covered view of the case.

 

[BumbleBee]

really nice