1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

power problem after bios update

Discussion in 'Motherboards & Memory' started by fankoosh, Jul 5, 2014.

  1. fankoosh New Member

    Joined:
    Jul 5, 2014
    Messages:
    5 (0.06/day)
    Thanks Received:
    0
    hello ppl

    i have Hero vii and i update bios to latest :904 , and after i update i notice that when plug power cable and press power button the led blink and after 3 sec pc start working .
    but when the cable already plugged, like i shutdown the pc then turn it on it work fine .
    so what is that ?
    and should i downgrade to original bios with usb flashback ? will fix it ?
     
    Last edited: Jul 5, 2014
  2. erixx

    erixx

    Joined:
    Mar 24, 2010
    Messages:
    3,351 (2.04/day)
    Thanks Received:
    463
    General tip: Did you reset the BIOS to defaults before and specially after flashing? or do a CMOS after flashing? It is healthy.

    Tip related to power cable: depending of your PSU it can take some seconds to be fully operative after plugging. The 3 seconds are surely for its internal boot checking.
     
    fankoosh says thanks.
  3. fankoosh New Member

    Joined:
    Jul 5, 2014
    Messages:
    5 (0.06/day)
    Thanks Received:
    0
    first finaly some 1 answer :D thx dude
    i posted in several sites but no answer
    sec : ya after i do CMOS but same problem.
    btw i use usb flash back and i go for original bios and it back to normal now every good
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page