PEPE3D
New Member
- Joined
- Feb 12, 2009
- Messages
- 44 (0.01/day)
- Location
- NJ, USA
System Name | PEPE3D-Custom Built |
---|---|
Processor | Intel QX9650 OC @4.02 GHz |
Motherboard | Asus Maximus II Formula P45 |
Cooling | CoolIT Systems Freezone Elite TEC CPU Cooler with MTEC |
Memory | Corsair PC-8500 8GB 1066 |
Video Card(s) | Daimond 4870x2 2GB XOC X two CF |
Storage | C:\Kingston ssdNowV+ series 128 GB(SNVP325-S2B) |
Display(s) | Samsung 244T 24" 1920x1200 |
Case | Coolermaster HAF-932 |
Audio Device(s) | Sound Blaster X-Fi Titanium Fatal1ty Champion |
Power Supply | Ultra X 1600 wattts |
Software | Windows 7 Pro 64 bit Edition |
Benchmark Scores | 3DMARK 06(24,507)3DMARK VANTAGE(20,587) |
I ran prime95 in three different OC's 3.8 GHz, 4.03GHz and 4.16GHz no errors. It was a trial an error for few days until I got the right voltages right, but the satisfaction is priceless. Check my pics. Thanks, LOL.
In the Bios the setting that matter everyting else auto, disable or enable.
Ratio CMOS Setting 10.5
FSB Frequency 396
FSB Strap to North Bridge 400MHz
DRAM Frequency DDR2-1055 MHz
DRTiming Control Manual- 5-5-5-15
Load Line Calibration Enable
CPU Spread Spectrum Disable
PCIE Spread Spectrum auto
CPU Voltage 1.40000
CPU PLL Voltage 1.55300
FSB Termination Voltage 1.32525
DRAM Voltage 2.10475
South Bridge 1.5 voltage 1.50
South Bridge 1.1 Voltage 1.11325
Set-up: Maximus II formula P45, Cpu QX9650, etc. Check my specs. They are publish next to my user name.
In the Bios the setting that matter everyting else auto, disable or enable.
Ratio CMOS Setting 10.5
FSB Frequency 396
FSB Strap to North Bridge 400MHz
DRAM Frequency DDR2-1055 MHz
DRTiming Control Manual- 5-5-5-15
Load Line Calibration Enable
CPU Spread Spectrum Disable
PCIE Spread Spectrum auto
CPU Voltage 1.40000
CPU PLL Voltage 1.55300
FSB Termination Voltage 1.32525
DRAM Voltage 2.10475
South Bridge 1.5 voltage 1.50
South Bridge 1.1 Voltage 1.11325
Set-up: Maximus II formula P45, Cpu QX9650, etc. Check my specs. They are publish next to my user name.