- Joined
- May 20, 2014
- Messages
- 86 (0.02/day)
Processor | i5 3570k |
---|---|
Motherboard | Asus p8z77-v lx |
Cooling | Intel stock |
Memory | 4gb Micron 1600mhz |
Video Card(s) | XFX r7 265 2gb Ghost edition |
Storage | WD Green 1tb 32mb cache |
Display(s) | HP 2009F |
Case | CM stacker |
Audio Device(s) | Steel Series 7h USB 7.1 |
Power Supply | Antec BP550+ |
Software | Win 8 64bit |
Hi guys, got this problem:
Overclocked my processor, set multiplier to 42 whatsoever, when system boots to desktop and i open cpu-z, the multiplier is at 42 showing overclock but after sometime (Few seconds later) the multiplier changes to 34 and i have my clocks set 3400mhz constantly, nothing changes even on rpime95 and aidaextreme cpu stability test, so in short something is preventing the overclock ...
These screenshots attached are at the very start of the desktop after bootup and few seconds later
And few seconds later
Before you ask me question, these are the things i did:
1) I disabled intel speedstep
2) turbo can't be disabled in asus z77 and z68 boards, if it is disabled then the multiplier also disables
3) I have tried voltages as auto, 1.25, 1.275 ... same shit
4) at defaylt settings, that's 3.4ghz base clock and 3.8ghz turbo, it runs perfect at max clocks of 3810mhz
5) I'm running stock cooler, that should not matter as overclocking can be done and my temps never exceeded 60 on default settings, with o.c (which didn't happen) but due to higher voltage the temp goes to 70-75c
My PC specs:
i5 3570k
Asus z77-v lx
4gb ddr3 micron at 1600mhz
antec bp550+
1TB WD green
So i'm open to suggestions:
Overclocked my processor, set multiplier to 42 whatsoever, when system boots to desktop and i open cpu-z, the multiplier is at 42 showing overclock but after sometime (Few seconds later) the multiplier changes to 34 and i have my clocks set 3400mhz constantly, nothing changes even on rpime95 and aidaextreme cpu stability test, so in short something is preventing the overclock ...
These screenshots attached are at the very start of the desktop after bootup and few seconds later
And few seconds later
Before you ask me question, these are the things i did:
1) I disabled intel speedstep
2) turbo can't be disabled in asus z77 and z68 boards, if it is disabled then the multiplier also disables
3) I have tried voltages as auto, 1.25, 1.275 ... same shit
4) at defaylt settings, that's 3.4ghz base clock and 3.8ghz turbo, it runs perfect at max clocks of 3810mhz
5) I'm running stock cooler, that should not matter as overclocking can be done and my temps never exceeded 60 on default settings, with o.c (which didn't happen) but due to higher voltage the temp goes to 70-75c
My PC specs:
i5 3570k
Asus z77-v lx
4gb ddr3 micron at 1600mhz
antec bp550+
1TB WD green
So i'm open to suggestions: