1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Radeon 1.1.1.0 Manual?

Discussion in 'AMD / ATI' started by wingclip, Dec 8, 2012.

  1. wingclip New Member

    Joined:
    Apr 30, 2011
    Messages:
    9 (0.01/day)
    Thanks Received:
    0
    Location:
    Houston, TX
    Hi Folks,
    I'm trying to figure out what I did to screw up my cards stabilization and what to do to get it fixed. I'm convinced that it has to do with my settings in RP and/or CCC and that these settings are trying to make the card work harder than it can.

    So Iā€™m looking for the RP 1.1.1.0 manual because if there's one thing i don't understand, it's setting the graphics so I have a minimum of 'shimmer' on distant water surfaces, or jagged edges outlining a cockpit or runway lines, (I think that's AA but there's so many variations), and a decent, not-too-soft, look in the scenery.

    I'm sure if I have the latest manual and apply myself, I may be able to sort this stuff out and figure what I should use and what I should 'turn off'. But the manual I'm reading from is not the 1.1.1.0 version.

    This is a little bit of a problem but if I have to, I'll just keep reading the one I have.

    BTW, after I launch a game using the "play" option in a profile I set up, do I have to leave RP open? I mean, do I have to minimize it to the task-bar or can I close the darn thing?:twitch:

    And the same question applies to the "Global" settings; If I make adjustments under the "Global" tab, do I then have to leave the RP window open and minimized in the task-bar in order for those changes to run?

    This version doesn't have a "Save" button like the 1.1.0.6 did, (when you made a change under the Global tab, a 'save' button would need to be clicked for the setting changes to be kept and applied).
    Thanks, Rich

    My Build
    CASE: Corsair Carbide Series 500R
    Asrock Z 77 Extreme 4
    8 gigs Ram 2x4, (Corsair Vengeance lowpro 1666MHz)
    OCZ 700 watt PSU
    Intel i7 2600K (clocked to 5.0GHz when I need it)
    MSI Radeon HD 7850PE (Power Edition), 4200MHz core & 5800 MHz Memory
    CPU cooling with Corsair H100, (4) 120mm fans push/pull config)
    OS drive: Seagate Barracuda 1 TB SATA 6 HDD
    Seagate Barracuda 750Gb (Internal)
    Seagate BlackArmor WS110 1Tb external
    WD Elements SE 1TB external
    WD MyPassport 750GB
    Simpletek 250Gb external
    Basic X16 DVD reader
    Xigmatek Accessor Ultimate Card Reader
    RealteK HD Sound
    Case Cooling: (1 ā€“ NZXT) 200mm & (7 ā€“ Excaliburs) 120mm case fans
    Windows 7 Home Premium 64bit
    HP 2511X 25" monitor
     
  2. BlackZero

    BlackZero New Member

    Joined:
    Jan 28, 2011
    Messages:
    168 (0.12/day)
    Thanks Received:
    103
    Location:
    England
    wingclip says thanks.
  3. wingclip New Member

    Joined:
    Apr 30, 2011
    Messages:
    9 (0.01/day)
    Thanks Received:
    0
    Location:
    Houston, TX
    Thanks,
    I knew that the last time I touched base with RP it wasn't at techpowerup but I couldn't remember where and Google failed me, (or maybe I didn't ask the right question):ohwell:.
    Rich

    BTW, the "latest version and manual" links are outdated. Now that I saw the page, I remembered having been there yesterday and checking out the links provided but I never did post anything.
    Thanks again
     
  4. OnePostWonder

    Joined:
    Dec 27, 2008
    Messages:
    582 (0.27/day)
    Thanks Received:
    107
    Are you certain a manual for 1.1.1.0 even exists? From RadeonPro's site, the latest user manual is 1.0.
     
    wingclip says thanks.
  5. wingclip New Member

    Joined:
    Apr 30, 2011
    Messages:
    9 (0.01/day)
    Thanks Received:
    0
    Location:
    Houston, TX
    Frankly, no. I'm no sure at all. In fact, your question just reminded me that this 1.1.1.0 version had to be given to me because the latest version I could get was 1.1.0.6.

    Then someone on Guru3D sent me a link and said the word "preview", (actual versions full title is "1.1.1.0 preview"), implied it was a beta version...

    So I'm pretty much betting that there isn't a manual for it yet:twitch:.
    Thanks for pointing that out.
    Rich
     
  6. BlackZero

    BlackZero New Member

    Joined:
    Jan 28, 2011
    Messages:
    168 (0.12/day)
    Thanks Received:
    103
    Location:
    England
    If you post in the official thread I am sure japamd or someone knowledgeable will help answer your query.
     
    wingclip says thanks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page