I have a Machine with the x1950 xtx uber edition kit installed in it the specs are as follows...
Amd fx-60 Socket 939
Abit At8 32X Crossfire Express 3200 Main board
3 gig pc 3200 ddr 400
X1950 XTX Uber edition Kit (1 1950 XTX and 1 x1950 Crossfire Card)
2 Western Digital 36.7 GB Raptor Sata Drives in a Radi on configuration
Windows Xp Professional 32 bit Service pack 2 w/ Direct X 9.0c installed
The problem I'm encountering is as Follows:
While Running Ati Tool v.26 one of my Video Cards is not recognized and therefore does not allow features such as fan control etc.
the card that is not recognized shows as Follows:
Device 0x7248, Bus:1, Dev:0
Device ID 7248
Chip Name 7248
Host interface PCI-E
Catalyst Version 7.7
Memory Size 512 MB
Memory Type DDR4
Memory Bus Width 256 bit
Active ROPs 16
Default GPU Clock 661.50 Mhz
Default Mem Clock 1044.00 Mhz
GB_Pipe_Select 0x3FE4
The working Device is as Follows:
Device 0x7240 R580 Bus:2,Dev:0
Device ID 7240
Chip Name R580
Host interface PCI-E
Catalyst Version 7.7
Memory Size 512 MB
Memory Type DDR4
Memory Bus Width 256 bit
Active ROPs 16
Default GPU Clock 661.50 Mhz
Default Mem Clock 1044.00 Mhz
GB_Pipe_Select 0x3FE4
I would Appreciate any information you might have on this issue. I mainly wanted to utilize the fan control aspects of your utility to override the fan speeds but I can not with out it correctly recognizing the cards
Thank you in advance for any help
Amd fx-60 Socket 939
Abit At8 32X Crossfire Express 3200 Main board
3 gig pc 3200 ddr 400
X1950 XTX Uber edition Kit (1 1950 XTX and 1 x1950 Crossfire Card)
2 Western Digital 36.7 GB Raptor Sata Drives in a Radi on configuration
Windows Xp Professional 32 bit Service pack 2 w/ Direct X 9.0c installed
The problem I'm encountering is as Follows:
While Running Ati Tool v.26 one of my Video Cards is not recognized and therefore does not allow features such as fan control etc.
the card that is not recognized shows as Follows:
Device 0x7248, Bus:1, Dev:0
Device ID 7248
Chip Name 7248
Host interface PCI-E
Catalyst Version 7.7
Memory Size 512 MB
Memory Type DDR4
Memory Bus Width 256 bit
Active ROPs 16
Default GPU Clock 661.50 Mhz
Default Mem Clock 1044.00 Mhz
GB_Pipe_Select 0x3FE4
The working Device is as Follows:
Device 0x7240 R580 Bus:2,Dev:0
Device ID 7240
Chip Name R580
Host interface PCI-E
Catalyst Version 7.7
Memory Size 512 MB
Memory Type DDR4
Memory Bus Width 256 bit
Active ROPs 16
Default GPU Clock 661.50 Mhz
Default Mem Clock 1044.00 Mhz
GB_Pipe_Select 0x3FE4
I would Appreciate any information you might have on this issue. I mainly wanted to utilize the fan control aspects of your utility to override the fan speeds but I can not with out it correctly recognizing the cards
Thank you in advance for any help