EnglishLion
New Member
- Joined
- Jul 17, 2005
- Messages
- 461 (0.07/day)
- Location
- Peterborough, UK
Processor | Intel Pentium Dual Core E2160 |
---|---|
Motherboard | ASUS P5E3 Deluxe |
Cooling | Akasa EVO 120 |
Memory | 2 x 1Gb OCZ Gold DDR3 1066Mhz 6,6,6,18 |
Video Card(s) | GeCube ATi X1950Pro 512Mb PCIe (Accelro X2) |
Storage | Samsung 320Gb SATA2 |
Display(s) | Samsung SM206BW 20" Widescreen TFT 1680x1050 |
Case | Coolermaster Centurion 532 |
Audio Device(s) | On board AC'97 |
Power Supply | Hiper Type-R 580W |
Software | Windows Vista Home Premium |
Benchmark Scores | See my OC Blog @ http://www.rowan-house.net/ |
I've got a RAID0 setup, its been running fine for a good few months now - no probs.
Just one little question though - I get a single drive temp reading (in systool or any other util), which drive temp is this, or maybe it's an average? Both drives are capable of providing temp readings - I've had them installed non-raid and seen 2 readings before.
It's not a problem as both drives are next to each other, identical drives and therefore are going to be pretty much the same temp - in fact when I had them installed non-RAID I did indeed get 2 identical readings.
Its a ASrock Dual Sata2 mobo - I'm sure the RAID controller is the key to the answer to this question!!
Just one little question though - I get a single drive temp reading (in systool or any other util), which drive temp is this, or maybe it's an average? Both drives are capable of providing temp readings - I've had them installed non-raid and seen 2 readings before.
It's not a problem as both drives are next to each other, identical drives and therefore are going to be pretty much the same temp - in fact when I had them installed non-RAID I did indeed get 2 identical readings.
Its a ASrock Dual Sata2 mobo - I'm sure the RAID controller is the key to the answer to this question!!