- Joined
- Jul 3, 2007
- Messages
- 1,317 (0.21/day)
- Location
- New Zealand
Processor | AMD Phenom II 555BE unlocked X4 @3.8GHz |
---|---|
Motherboard | GA-78LMT-S2P |
Cooling | Thermaltake Blue Orb + open case in cold room = low temps lol |
Memory | 8Gb DDR3 1600 |
Video Card(s) | GTX580 |
Storage | 64GB SSD Super Talent |
Display(s) | 22" Chimei, 17" Philips |
Case | POS! |
Power Supply | Cooler Master Silent Pro Gold 800W |
Hey all, bored today and just felt like sharing an idea I had.
Messing about with an old mobo outside the case - no power switch. Didn't have any leads to attach to the header so I cannabilised an old floppy cable, cut a chunk out of the connector, it looks like this:
Cut a piece 2 holes wide, pulled out the excess pins, soldered a switch onto it.
Here it is on the motherboard. Should be pretty handy in future, use on any motherboard, very easy to pull on/off.
Messing about with an old mobo outside the case - no power switch. Didn't have any leads to attach to the header so I cannabilised an old floppy cable, cut a chunk out of the connector, it looks like this:
Cut a piece 2 holes wide, pulled out the excess pins, soldered a switch onto it.
Here it is on the motherboard. Should be pretty handy in future, use on any motherboard, very easy to pull on/off.