1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Samsung Launches 500 Gigabyte per Platter 3.5-inch Spinpoint F3 Hard Drives

Discussion in 'News' started by malware, Jul 29, 2009.

  1. malware New Member

    Joined:
    Nov 7, 2004
    Messages:
    5,476 (1.55/day)
    Thanks Received:
    956
    Location:
    Bulgaria
    Samsung Electronics, a worldwide leader in digital consumer electronics and information technology, announced today its new line-up of high-density hard drives for high-end computing environments, the Spinpoint F3. The F3 operates at 7200 RPM with offerings of up to 1 Terabyte (TB) data storage capacity by using two 500 Gigabyte (GB) per platter disks. As well as meeting data center requirements for addition storage to meet rising demand and increasing performance needs, the new drives also deliver high-performance with lower power for desktop computers and servers.
    The Spinpoint F3 utilizes advanced 500 GB per platter technology, so that two-platter 1 TB capacity is achieved. Increased areal density per platter provides up to a 30 percent higher performance than a three-platter 1 TB in the same 3.5" form factor. A reduction in mechanical parts also contributes to enhanced reliability in terms of anti-shock and data failure.

    "Our customers require not only additional capacity but also high performance for their server and desktop storage systems, while promoting a green environment," said Choel-Hee Lee, vice president of marketing, Storage Systems Division, Samsung Electronics. "The massive capacity-per-platter and high-performance features of the new Spinpoint F3 make it an attractive solution for driving the growth of high-density storage."

    "Market forecasts estimate 500 GB per platter and higher densities will experience over 15 percent annual growth in the next five years, with expectations that high density storage will become main stream for 3.5" storage beyond 2010," said Mark Geenen, president of TRENDFOCUS.

    Samsung's new hard drive utilizes its low noise operation technology SilentSeek and NoiseGuard to achieve a quiet operation system. In addition, the new Spinpoint F3 is compliant with the (RoHS) restriction of hazardous substances directive.

    The F3 incorporates a 7200 RPM rotational speed, a 3.0Gbps SATA interface, Native Command Queuing features and a 16 MB/32 MB buffer memory. The Spinpoint F3 is currently available in 500GB capacities worldwide. The 1 TB drive is scheduled for initial shipment in August.

    Source: BusinessWire
    Last edited: Jul 29, 2009
  2. Mussels

    Mussels Moderprator Staff Member

    Joined:
    Oct 6, 2004
    Messages:
    41,927 (11.76/day)
    Thanks Received:
    9,356
    oooh, 1TB drives with two platters. sounds nice.

    Quieter, lower power, 30% better performance - yay :D
  3. marsey99

    marsey99

    Joined:
    Jul 18, 2007
    Messages:
    1,539 (0.60/day)
    Thanks Received:
    289
    short stroke 2 of those 500gb f3 drives in a striped array and you would have a nice fast c drive and then have 2 partitions for data and back up :cool:
  4. Easo

    Easo

    Joined:
    May 19, 2009
    Messages:
    823 (0.44/day)
    Thanks Received:
    78
    Location:
    Latvia
    And price compared to F1 / F2 is ...?
  5. Mussels

    Mussels Moderprator Staff Member

    Joined:
    Oct 6, 2004
    Messages:
    41,927 (11.76/day)
    Thanks Received:
    9,356
    most likely, more expensive. but give it time, F1 and F2 will disappear from the market, and these will end up in the same price category.
    Easo says thanks.
  6. inferKNOX

    inferKNOX

    Joined:
    Jul 17, 2009
    Messages:
    899 (0.49/day)
    Thanks Received:
    118
    Location:
    SouthERN Africa
    Looks like Seagate's minuscule 7200.12 lead has been eroded.:p
    Whoa! Samsung is taking over the world! Ruling with monitors, HDDs, quickly rising with RAM, TVs, Phones, Ice-cream flavours, you name it, they got it?:twitch:
  7. Fx

    Fx

    Joined:
    Oct 31, 2008
    Messages:
    496 (0.24/day)
    Thanks Received:
    87
    Location:
    Portland, OR
    I would rather buy an intel SSD for the OS then have 2 drives for data. I always have atleast 2 drives to store and backup data

    also, you dont have to worry about taking a RAID hit on performance, worry about having drives made for RAID as they cost more, or the recovery process of rebuilding which isnt always successful either if you use software to automatically mirror the data from one to the other
  8. inferKNOX

    inferKNOX

    Joined:
    Jul 17, 2009
    Messages:
    899 (0.49/day)
    Thanks Received:
    118
    Location:
    SouthERN Africa
    Hmm, judging by Intel's current cheapest 160GB SSD for $460 & the current 1TB F1 price of $80, should I rather buy 160GB or 6TB.... hmm? I think I'll stick with 6TB, or however many drives my case can take before being maxed out.:laugh:
    Last edited: Jul 29, 2009
  9. Fx

    Fx

    Joined:
    Oct 31, 2008
    Messages:
    496 (0.24/day)
    Thanks Received:
    87
    Location:
    Portland, OR
    I ended up buying the 80gb for my OS. I installed it last night and I extremely pleased with my first SSD. I also installed two, 2TB WD drives for data. I use Goodsync to copy the data over that runs by a schedule. it all cost about $920 including S&H but I am set for a long time
  10. wiak

    wiak

    Joined:
    Sep 5, 2004
    Messages:
    1,743 (0.48/day)
    Thanks Received:
    198
    Location:
    Norway
    F3 is a replacement for F1, F2 is a low power drive much like WDs green line
  11. TheLaughingMan

    TheLaughingMan

    Joined:
    May 7, 2009
    Messages:
    5,063 (2.68/day)
    Thanks Received:
    1,292
    Location:
    Marietta, GA USA
    500 GB single platter drive for primary would be nice. That would completely remove head/platter changes in data seeks. Nice. I think I know what my next 2 drives will be.
  12. Jizzler

    Jizzler

    Joined:
    Aug 10, 2007
    Messages:
    3,386 (1.34/day)
    Thanks Received:
    632
    Location:
    Geneva, FL, USA
    Not bad. Though with that kind of money, I'd be too tempted to go with 6 x 64GB SSD, which gives me just enough space for OS/Apps, as well as 600MB/s read/writes :D

    Any reason to use GoodSync instead of RAID-1? I like Goodsync, but use it for syncing to external drives.
  13. Fx

    Fx

    Joined:
    Oct 31, 2008
    Messages:
    496 (0.24/day)
    Thanks Received:
    87
    Location:
    Portland, OR
    lets just say after having lost data twice from a RAID 5 and a RAID 1 implementation I no longer feel comfortable with it. plus by using goodsync you can buy 2 normal drives w/out RAID support for less money to achieve the same thing

    reads and writes can have marginal increases in performance but can also take hits based upon RAID 1 and it doesnt have to initialize upon startup. it syncs up once a day at 5am. this just keeps things simple
  14. tkpenalty New Member

    Joined:
    Sep 26, 2006
    Messages:
    6,958 (2.45/day)
    Thanks Received:
    345
    Location:
    Australia, Sydney
    Skyscrapers, military applications, etc.
  15. inferKNOX

    inferKNOX

    Joined:
    Jul 17, 2009
    Messages:
    899 (0.49/day)
    Thanks Received:
    118
    Location:
    SouthERN Africa
    IMO it's too soon to jump on the SSD bandwagon. In 1/2 a year they will probably be 5x the current size for 1/2 the price.:rolleyes:
    Yes, waiting for prices with tech can be futile, but when prices are dropping at such a rapid rate, it's worth the wait. Besides, it's an emerging tech still, so there are still kinks here and there, and after a while when the prices are also good, those kinks would have been ironed out.
    Besides that, SATA3 - 6Gb/s is about to sweep through the industry, so it's better to wait and buy a SATA3 SSD at a lower price, with less bugs and more capacity.:roll:
  16. Mussels

    Mussels Moderprator Staff Member

    Joined:
    Oct 6, 2004
    Messages:
    41,927 (11.76/day)
    Thanks Received:
    9,356
    look at intels one. they halved the price between generatiosn.

    Sure it will take a few years - but SSD *will* overtake mechanical drives (as we know them - the HRD drives may change things)
  17. TheLaughingMan

    TheLaughingMan

    Joined:
    May 7, 2009
    Messages:
    5,063 (2.68/day)
    Thanks Received:
    1,292
    Location:
    Marietta, GA USA
    Can't wait for crystal matrix storage. closer and closer to those rods from Star Trek every year.
  18. Fx

    Fx

    Joined:
    Oct 31, 2008
    Messages:
    496 (0.24/day)
    Thanks Received:
    87
    Location:
    Portland, OR
    at $225 I had to drink the kool aid. I must say that I am VERY pleased with the performance gains over my Velociraptor. this drive will be able to use TRIM with win7 also

    now is a great time to switch. I get to sell my velociraptor while it still holds some value to reimburse the purchase. if I waited another year I would lose another half of its former value. atleast this way I can look at it like an awesome upgrade for $75 instead of $150+

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page