1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Scratch Build] CM SupreDesk

Discussion in 'Project Logs' started by L4mka, Oct 5, 2013.

  1. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    Hi, I'm new here, so sorry for some mistakes and my english :D



    My PC was very noisy when I played games, so I was thinking more and more about creating watercooling rig, but it was rather dream. Few months ago I need a new desk and in the same time I saw L3P's projects (L3p desk, Cross by Redharbinger).. So I decided to make my own desk including computer with water cooling.


    SPONSORS


    [​IMG]

    With PSU V850 and 4x JetFlo 120 red fan.

    [​IMG]

    With EK-HD fittings and angle adapters.

    [​IMG]

    GTX770DC2OC

    [​IMG]

    With Alphacool radiators and few special fittings.

    Thank a lot to sponsors. I can't finis this project without these parts.


    I spent hours figuring out how to do it all. Next days I was making some sketches in Google Sketchup and after that and then I finally drew everything in AutoCAD.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Oct 21, 2013
  2. night.fox

    night.fox

    Joined:
    Dec 23, 2012
    Messages:
    876 (1.35/day)
    Thanks Received:
    406
    Location:
    south korea
    Looks good..... Maybe asked the new 290x and quadfire them.. lol....

    Good luck on your new project...

    I saw this kind of desk somewhere....
     
    Crunching for Team TPU
  3. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    FIRST UPDATE

    After laser cutting and bending the "main" part of desk, I bring it home and test it little bit :D

    Everything started on this nice laser cutter
    [​IMG]

    And continues on this powder coater :)
    [​IMG]

    Finally at home!
    [​IMG]

    Testing some old MB and fans, everything fits as I wanted. :)
    [​IMG]

    [​IMG]

    [​IMG]

    After that I must do slot for MB. I used back part of old Eurocase.. :idea:

    [​IMG]

    I cuted off all unnecessary parts

    [​IMG]

    [​IMG]

    then I resurfaced it.

    [​IMG]

    And test it into lasercutted part. :)

    [​IMG]
     
    stinger608 says thanks.
  4. DF is BUSY

    DF is BUSY

    Joined:
    Oct 13, 2013
    Messages:
    267 (0.75/day)
    Thanks Received:
    50
    looking forward to seeing the table once you set it up :cool:





    *edit

    ah L3P ! i knew i recognized the table somewhere
     
  5. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    Hi,

    I am pleased to introduce a new sponsor - Aquatuning. They joined the project with beautiful radiators and special fittings.

    [​IMG]

    Thanks a lot to this company! :)
     
    stinger608 says thanks.
  6. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    Making the HDD holder, I try so much options and this is the best imo.

    [​IMG]

    [​IMG]

    [​IMG]

    Painted with RAL9005 and test in in desk :)

    [​IMG]

    I also paint the MB slot :)

    [​IMG]

    I started sleeving PCIE and 24PIN.

    [​IMG]

    6pin PCIE

    [​IMG]


    24PIN + waiting for black connector

    [​IMG]
     
  7. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    Last week I was very busy, because I was making the desk from wood. I am not so good in wooden works, so I made the desk with my friend in his factory.

    That is him! :D

    [​IMG]

    Wooden part of desk is made from material Egger1137ST (oak).

    [​IMG]

    Afterk co-op working with me friend i bring the desk home. :)

    [​IMG]

    COOLERMASTER SPONSORED PARTS

    Thanks a lot Cooler Master for their help and for sending me PSU 850V and 4x JetFlo 120 Red Fan. Enjoy photos of CoolerMaster quality products!

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
     
  8. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    I am here with next update. I added to desk switches for ledstrips, on/off button and fan regulators. There are 3 photos of empty desk with switches.

    [​IMG]

    [​IMG]

    [​IMG]

    In this photo are mentioned switches. From left: on/off button, on/off button for left fans, on/off for led strip, on/off red strip, on/off strip on back of monitor (not decided which color).

    [​IMG]

    These are 90mm cutted threads for holding the desk with reserviors.

    [​IMG]

    [​IMG]

    They will hold this desk with reserviors.

    [​IMG]

    Arrived package from Aquatuning.de
    Thank a lot to this company for radiators and few extension fittings!

    [​IMG]

    Started to install radiators. UT30 Full Copper 360 on left side.

    [​IMG]

    And install CoolerMaster fans.

    [​IMG]


    [​IMG]

    UT60 Full Copper 360 on right side.

    [​IMG]

    Install Scytche Gentle Typhoon fans.

    [​IMG]

    And the doted aluminium cover :)

    [​IMG]
     
  9. Dice

    Dice

    Joined:
    Feb 26, 2009
    Messages:
    213 (0.10/day)
    Thanks Received:
    38
    wow that looks sick!
     
  10. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    I did not have so much time last 2 weeks, so here is new update. At first I done electrical wiring to FANs and led strips. And try red and blue lighting.

    [​IMG]

    [​IMG]

    I started to completing steel parts. Desk for reserviors and steel bulkhead (wall)

    [​IMG]

    And with closed top.

    [​IMG]

    Made holes for threaded rod to hold desk for reserviors. Looks good imo.

    [​IMG]

    SPONSOR UPDATE

    Arrived awesome package from ASUS Czech Republic :)

    [​IMG]

    GTX770DC2OC

    [​IMG]

    [​IMG]

    Installed Alphacool D5 pump on place.

    [​IMG]

    FIRST TUBE

    [​IMG]

    Tubing with John Guest push-in fittings, working with them beautifully.

    [​IMG]

    And made drain port.

    [​IMG]

    Connect the first reservior to the loop.

    [​IMG]

    And the second reservior connected.

    [​IMG]

    View on tubed part with the wall. :)

    [​IMG]
     
  11. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    SMALL UPDATE

    Hi, I am very busy last weeks so I post only small update :)

    Arrived blocks and fittings from EKWB. So I installed them.

    Small army of EKWB Fitiings :D Thank you so much EKWB for them!

    [​IMG]


    EK-RAM Monarch X4 - Acetal+Nickel CSQ + EKWB Fittings

    [​IMG]

    [​IMG]

    [​IMG]

    Installed EK Water Blocks EK-Supremacy - Nickel Acetal + EK-HD adapters

    [​IMG] [​IMG]

    Started with tubing. 10/12 Acrylic pipes and EKWB Fittings - working with them is beautiful! :)


    [​IMG]


     
  12. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    AquaTuning UPDATE

    Hi, today only small update about next sponsored package from Aquatuning.de.
    In this package is second D5pump, tubing and few fittings and nice present - AquaTuning T-shirt!! :)
    Thanks a lot for this help!


    D5+TOP, tubing and fittings all Alphacool.
    [​IMG]


    Very nice T-shirt! I really like it :D
    [​IMG]

    [​IMG]


    [​IMG]


    Stay tuned, on weekend will be bigger update with GPU :)
     
  13. rougal

    rougal

    Joined:
    Nov 2, 2007
    Messages:
    117 (0.05/day)
    Thanks Received:
    27
    A nice comfy warm table for the winter...
     
  14. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    Hi, at the weekend I installed block on GPU and fit it to the mobo and connect some more tubing :) Tomorrow I will install the second pump into desk and will do some flow tests.

    Asus GTX770DC2OC and EKWB block

    [​IMG]

    Naked 770

    [​IMG]

    And with EKWB block :)

    [​IMG]

    Installed GPU in MB and connected with tube to RAM block

    [​IMG]

    [​IMG]

    More tubes connected.

    [​IMG]

    From GPU will be connected into ST30 360mm radiator.

    [​IMG]

    [​IMG]
     
  15. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    Hi, this update is one of the last, because desk is almost finished :)
    I fitted Mainboard into desk and connect all tubes.

    MB with slot in desk - without cables.

    [​IMG]

    Detail of ASUS GTX770DC2OC - again thanks ASUS!

    [​IMG]

    View of HDD standings.

    [​IMG]

    And another one :)

    [​IMG]

    Connected sleeved extension cables into MB and GPU.

    [​IMG]

    [​IMG]

    MB in place with extensions connected to PSU cables.

    [​IMG]

    Overall view of desk.

    [​IMG]

    View of 'left side' of desk with MB.

    [​IMG]

    Detail on MB with connected cables and tubing

    [​IMG]

    Reserviors - Alphacool :)

    [​IMG]

    And view of PSU CoolerMaster V850 - thanks a lot for this super PSU!

    [​IMG]
     
    rougal says thanks.
  16. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    UPDATE

    Hi, here is the last update. Desk is finished and in next few days I will upload final photos.

    Installed second D5 Alphacool pump from Aquatuning.de

    [​IMG]

    And started to fill the loop :)

    [​IMG]

    One very little leak. Fittings were not tightened well, but i fixed it and now it is okay :)

    [​IMG]
     
    rougal says thanks.
  17. L4mka

    L4mka

    Joined:
    Oct 5, 2013
    Messages:
    33 (0.09/day)
    Thanks Received:
    49
    Hi, so.. Desk is completely finished! :)

    I would like again thanks to my sponsors:

    CoolerMaster
    ASUS
    EKWB
    AquaTuning

    Very big thanks to them for supporting me with amazing products to my project! :)




    FINAL PICS


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Everything about this - photos, buildlogs, hardware etc. used in build you can find on:

    www.cmdesk.eu

    Wish you all Merry Christmas and Happy New Year! :)
     
    rougal says thanks.
  18. rougal

    rougal

    Joined:
    Nov 2, 2007
    Messages:
    117 (0.05/day)
    Thanks Received:
    27
    Congratz.. Job well done..

    [​IMG]
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page