The AMD Phenom II OC'ers Club

Chicken Patty · Feb 13, 2010

(FIH) The Don said:
awww man, i wanna try out some oc'ing to, but its unfair, i only have air

Don what settings you looking for, for my 4.2 GHz? or my daily clocks?

(FIH) The Don · Feb 13, 2010

the high one

Chicken Patty · Feb 13, 2010

(FIH) The Don said:
the high one

vcore was at 1.5 then adjusted through AOD.

everything else at default except NB which was 1.3v

cdawall · Feb 13, 2010

p_o_s_pc said:
so i take it as you don't have a interest in selling them later on then if your wanting 6 core

i want them for now i might sell them in the future bit i haven't found anymore cazy deals on cpu's so not for sale as of now.

keep an eye on ebay my cpu's were OEM pulls and i can't complain bout that cpu is a cpu.

Velvet Wafer · Feb 13, 2010

fullinfusion said:
show off? piss that bro,,,, like you never rub the clocks in our faces.... remember were all newbies here compared to the master CD lol..... It's just a good thing we got going atm so hush lol

Knowledge+ trial and error+ much time can do wonders, dont forget that :laugh:

Chicken Patty said:
stay out of my biz hoe! Too lazy to tweak bro

DICE does wonders. CDA

cant we find someone with a dual stage or LN2, that will post his 5 ghz+ screenies?

EDIT: Don, open the windows!

fullinfusion · Feb 13, 2010

(FIH) The Don said:
@ CP

@ FullinFusion

what are your exact settings in bios for voltage, nb HT and other things?

here these AOD settings match 100% what I have the bios set at.... no acc and cpu spread spectrum is set to disabled

oh I also have cpu load line calibration enabled otherwise it will ramp up the cpu and other volts higher than what I want them to run....

cdawall · Feb 13, 2010

Velvet Wafer said:
Knowledge+ trial and error+ much time can do wonders, dont forget that

cant we find someone with a dual stage or LN2, that will post his 5 ghz+ screenies?

EDIT: Don, open the windows!

trying to get LN2 for myself but its proving a little difficult

fullinfusion · Feb 13, 2010

(FIH) The Don said:
YHPM

Replied

Velvet Wafer · Feb 13, 2010

cdawall said:
trying to get LN2 for myself but its proving a little difficult

the dewar simply costs too much,eh? you really need money if using that,from what i recognized

fullinfusion · Feb 13, 2010

Chicken Patty said:
stay out of my biz hoe! Too lazy to tweak bro

DICE does wonders. CDA

OMFG LMAO hahahahahahahahah

eidairaman1 · Feb 13, 2010

METSU HADOUKEN Beats all!!!

cdawall · Feb 13, 2010

Velvet Wafer said:
you dont use k10stat much,eh?

only every time i boot a phenom lol

fullinfusion said:
show off? piss that bro,,,, like you never rub the clocks in our faces.... remember were all newbies here compared to the master CD lol..... It's just a good thing we got going atm so hush lol

lol no one said 4.2ghz on water was bad i just can't do it with what i got on me right now so i get frustrated haha

Chicken Patty said:
stay out of my biz hoe! Too lazy to tweak bro

DICE does wonders. CDA

hey its not cheating to have DICE and at least i have cas 7 timings and those are loose IMO

Velvet Wafer said:
the dewar simply costs too much,eh? you really need money if using that,from what i recognized

only like $300 :banghead:

Velvet Wafer · Feb 13, 2010

cdawall said:
only every time i boot a phenom lol

only like $300

you got no CPU NB volts in bios like me?

how much does a sessions cost, if you bench with a normal amount of LN2?

p_o_s_pc · Feb 13, 2010

cdawall said:
i want them for now i might sell them in the future bit i haven't found anymore cazy deals on cpu's so not for sale as of now.

keep an eye on ebay my cpu's were OEM pulls and i can't complain bout that cpu is a cpu.

if you want to sell CPUs and anything else PM me please :toast:

Kei · Feb 13, 2010

fullinfusion said:
the 120.2 rad CP gave me.... I think that's what it is hey David?

oh and to note.... i have two 120mm fans pulling air through the rad and my custom cut thin foam air filter on the back side cuz im lazy to remove the rad to wash it clean

Kei I sent it out by ground since money has been real tight sense x-mas but if you want I can take a photo of the receipt to show ya? It was defiantly sent to you bro...it will be there tomorrow I bet

No I'm not worried in the LEAST bit that you sent it...I was just wondering what radiator you're running now because I'm thinking crazy already and your clocks have me lusting after a bigger radiator before the first one ever got installed. :roll:

I wasn't sure what 120.2 meant, I didn't know if that was two 120's or if that was a specific model. I just ate some internet knowledge though, and now see it's two 120's. The day after you sent me the other rad I was like a kid in the candy store looking at totally ridiculous quad setups (120.4 I believe they'd be called :eek:

).

Look what you've done to me....... :shadedshu

We've been under a state of emergency (lifted last night) so I'm going to go check the post to see if the rad is there tomorrow. Hopefully it is so I can start to plan for the next one already lol

Once I'm done with the first rad and get restless it'll be sent off the the next owner...always pay it forward boys and girls. :toast:

eidairaman1 said:
METSU HADOUKEN Beats all!!!

those words..............my how i hate those two words............lol

Kei

cdawall · Feb 13, 2010

Velvet Wafer said:
you got no CPU NB volts in bios like me?

how much does a sessions cost, if you bench with a normal amount of LN2?

lol i have a CH3 the k10stat is for single core clocking fun you can push sp1m scores if you set it to a highly oc'd single core most phenoms have one core that clocks higher so use that one.

p_o_s_pc said:
if you want to sell CPUs and anything else PM me please

i'll see what i wanna do with them i haven't even gotten them bootin all the way yet

Velvet Wafer · Feb 13, 2010

cdawall said:
lol i have a CH3 the k10stat is for single core clocking fun you can push sp1m scores if you set it to a highly oc'd single core most phenoms have one core that clocks higher so use that one.

i'll see what i wanna do with them i haven't even gotten them bootin all the way yet

alright, if youre THAT into benching, then youre supposedly right^^

fullinfusion · Feb 13, 2010

Kei said:
No I'm not worried in the LEAST bit that you sent it...I was just wondering what radiator you're running now because I'm thinking crazy already and your clocks have me lusting after a bigger radiator before the first one ever got installed.

I wasn't sure what 120.2 meant, I didn't know if that was two 120's or if that was a specific model. I just ate some internet knowledge though, and now see it's two 120's. The day after you sent me the other rad I was like a kid in the candy store looking at totally ridiculous quad setups (120.4 I believe they'd be called ).

Look what you've done to me....... :shadedshu

We've been under a state of emergency (lifted last night) so I'm going to go check the post to see if the rad is there tomorrow. Hopefully it is so I can start to plan for the next one already lol

Once I'm done with the first rad and get restless it'll be sent off the the next owner...always pay it forward boys and girls.

Oh and David, wheres CP now? trying to squeez a tad more MHz outta his cpu lol......here I got this now stable....

those words..............my how i hate those two words............lol

Kei

I twist your mind and you think nothing about it lol.... The rad I sent you will work close to the temp's im running now but just make sure the block you chose is nice and flat.... b4 I lapped my block i could remove the mounting screws and the block would just fall into my hands....

After I lapped i removed the screws on the block to swap out this cpu and I tell ya, I had to twist and turn the block to free it up... It's working soooo much better now I can't believe it.

cdawall · Feb 13, 2010

Velvet Wafer said:
alright, if youre THAT into benching, then youre supposedly right^^

thats how much i'm into benching haha i was looking for some pics and hound that VIN1 on hwmon is my core voltage BTW

haha 65nm can survive almost 100C anyone wanna start a highest temps on a cpu thread?

YautjaLord · Feb 13, 2010

I just had my 1st OC (or not) related BSOD. And why ? I checked if i can choose the 1920x1200 res in Crysis, ok ? I can. Here's what happened next : played one of downloaded maps in all that f***ing 1920x1200 VeryHigh glory :laugh:

, watched as crabs go by in the map.... POOF !!!!! BSOD !!!!! :roll:

Had to lower the clock back to 3.6GHz. Until i get TRUE i stay @ that clock.

P.S. You really doing awesome job there, fullinfusion - may your 4+GHz clock be kosher !!!!!

fullinfusion · Feb 13, 2010

xanlord said:
I just had my 1st OC (or not) related BSOD. And why ? I checked if i can choose the 1920x1200 res in Crysis, ok ? I can. Here's what happened next : played one of downloaded maps in all that f***ing 1920x1200 VeryHigh glory , watched as crabs go by in the map.... POOF !!!!! BSOD !!!!! Had to lower the clock back to 3.6GHz. Until i get TRUE i stay @ that clock.

P.S. You really doing awesome job there, fullinfusion - may your 4+GHz clock be kosher !!!!!

Thank you xanlord, that means allot :respect:

YautjaLord · Feb 13, 2010

You welcome, overclocker.

Velvet Wafer · Feb 13, 2010

fullinfusion said:
Thank you xanlord, that means allot

yeah... your OC is bleeding out

i dont believe you need to fake your Results,eh?

fullinfusion · Feb 13, 2010

Velvet Wafer said:
yeah... your OC is bleeding out

i dont believe you need to fake your Results,eh?

haha I dont think so!!!! I never nor do I know how to cheat lol..... here I took a shot at the voltage to to fuck with CP..... I could probaly go a tad lower on the volts but her ya go.... 4.3GHz

Kei · Feb 13, 2010

fullinfusion said:
I twist your mind and you think nothing about it lol.... The rad I sent you will work close to the temp's im running now but just make sure the block you chose is nice and flat.... b4 I lapped my block i could remove the mounting screws and the block would just fall into my hands....

After I lapped i removed the screws on the block to swap out this cpu and I tell ya, I had to twist and turn the block to free it up... It's working soooo much better now I can't believe it.

lol, yea I think you may just have pulled me to the darkside of cpu cooling after all this time trying.

I'm going to start off with that enzotech block you told me about, and first thing that's gonna happen is to lap it so it matches the cpu. I don't see too much point in having a lapped processor, and then getting even better cooling without bothering to make sure it's optimized.

Kei

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	Ivy Biatch
Processor	i5 3570K
Motherboard	ASSRockzz z77TOTHEEXTREME!!!!
Cooling	bleh
Memory	2x4gb crucial 1866
Video Card(s)	HD7770, yes it does BF3
Storage	120gb Vertex
Display(s)	226BW
Case	whats that, oh my table
Audio Device(s)	stock onboard thing
Power Supply	HX850W
Software	7

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

The AMD Phenom II OC'ers Club

Chicken Patty

(FIH) The Don

Chicken Patty

cdawall

where the hell are my stars

Velvet Wafer

fullinfusion

Vanguard Beta Tester

cdawall

where the hell are my stars

fullinfusion

Vanguard Beta Tester

Velvet Wafer

fullinfusion

Vanguard Beta Tester

eidairaman1

The Exiled Airman

cdawall

where the hell are my stars

Velvet Wafer

p_o_s_pc

F@H&WCG addict

Kei

cdawall

where the hell are my stars

Velvet Wafer

fullinfusion

Vanguard Beta Tester

cdawall

where the hell are my stars

YautjaLord

fullinfusion

Vanguard Beta Tester

YautjaLord

Velvet Wafer

fullinfusion

Vanguard Beta Tester

Kei

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	...no name yet
Processor	AMD Ryzen 7800x3D
Motherboard	ASUS STRIX X670E-E Wi-Fi
Cooling	EK Nucleus AIO CR360 Lux-D-RGB
Memory	G.Skill Ripjaws DDR5 6000Mhz CL36 32GB (2x16)
Video Card(s)	MSI 4090 Gaming Trio
Storage	1Tb Samsung 860 SSD, twin 2TB Samsung nvme drives
Display(s)	Asus ROG Swift PG279Q IPS gsync 2k
Case	Thermaltake P5 wall mounted and backlit with Corsair lighting node pro
Power Supply	EVGA P3 1000w
Mouse	Logitech G9x (awesome!)
Keyboard	Logitech G105
VR HMD	Pimax 5k+
Software	Windows 10 64Bit
Benchmark Scores	CPU-Z 698s/7465m (7800x3D result)

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2