1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

The AMD Phenom II OC'ers Club

Discussion in 'techPowerUp! Club Forum' started by ShadowFold, Dec 22, 2008.

  1. Fatal

    Fatal

    Joined:
    Jan 21, 2009
    Messages:
    732 (0.38/day)
    Thanks Received:
    120
    Location:
    Golden, Colorado
    You said your idle temps for the 1100t was about 38-40c and load was 45-48c stock. That was with IntelBurn 10 runs 6 threads and standard stress level. I told you that the Corsair H60 wouldn’t perform well in the Raven. If it’s mounted on the bottom it will but that’s why I switched to the FRIO. My H50 I had in push / pull with Scythe Ultra Kaze’s and my temps were best when it was mounted on the bottom. The issue was that the 120x 35mm fans would hit my memory, that and it just didn’t look right. If I replaced the stock FRIO fans 110 CFM with the Kaze’s I am sure the temps would be close if not better.

    I have the H50 in my NZXT Phantom case and I made a 35mm shroud temps are great with only 1 Kaze used. I have looked around and most say that the 1100t runs out of steam at 4.0 but that could be because of air cooling. BigBoss4212 I guess you will just have to bring it to me or I will have to come over your house to see what it can do.
  2. tilldeath New Member

    Joined:
    Feb 8, 2011
    Messages:
    200 (0.17/day)
    Thanks Received:
    7
    Does it really matter? Fatal and I will still rape your computer no matter how hard you try. :roll: :laugh:
  3. JrRacinFan

    JrRacinFan Served 5k and counting ...

    Joined:
    Mar 17, 2007
    Messages:
    19,414 (7.48/day)
    Thanks Received:
    4,483
    Location:
    Youngstown, OH
    :eek::twitch:

    I hope you are all friends! What's a little rape between friends other than a let's just say sore orifices. :p

    Now if you were enemies or don't know each other, I could see that statement going totally in "wtf?... awkward" moment.
  4. texaschainsaw01 New Member

    Joined:
    Jul 26, 2011
    Messages:
    37 (0.04/day)
    Thanks Received:
    2
    really

    lol you say that but you dont have your pc specs listed and in comparision fatals pc may beat mine in cpu crunching but mines got him bent over graphics wise since upgrading to a 6950 2gb lolz so over all mine wins
  5. tilldeath New Member

    Joined:
    Feb 8, 2011
    Messages:
    200 (0.17/day)
    Thanks Received:
    7
    what you trying to say? You want to start somethin?
  6. Fatal

    Fatal

    Joined:
    Jan 21, 2009
    Messages:
    732 (0.38/day)
    Thanks Received:
    120
    Location:
    Golden, Colorado
    Yeah we all know each other the raping is not going to happen. If people have great computers then they should help the TPU HWBOT team out. Just my thought about it I like competition.
    JrRacinFan says thanks.
  7. texaschainsaw01 New Member

    Joined:
    Jul 26, 2011
    Messages:
    37 (0.04/day)
    Thanks Received:
    2
    Yeah ill help

    yeah i agree just wish amateur builders didnt make comments when there not needed lol and im more than happy to help someone out lol
  8. Velvet Wafer

    Velvet Wafer New Member

    Joined:
    Jun 16, 2009
    Messages:
    5,123 (2.89/day)
    Thanks Received:
    990
    Location:
    North of Germany
    This thread is severly deranging again... can we keep up the good work, and dont start to mess around? Thank you!;)
  9. de.das.dude

    de.das.dude Pro Indian Modder

    Joined:
    Jun 13, 2010
    Messages:
    7,423 (5.26/day)
    Thanks Received:
    1,909
    thats why i hate trolling newbies.
  10. cdawall where the hell are my stars

    Joined:
    Jul 23, 2006
    Messages:
    20,643 (7.29/day)
    Thanks Received:
    2,969
    Location:
    some AF base
    still looses to mine :laugh: ask anyone on here

    whose an amateur builder FNG?
  11. LifeOnMars

    LifeOnMars New Member

    Joined:
    Jun 20, 2008
    Messages:
    2,566 (1.20/day)
    Thanks Received:
    396
    Location:
    Kettering,Northants. UK
    I suggest texaschainsaw01 gets to know a few people on here first before shooting his virtual mouth off. cdawall is well known and respected around these parts.

    TC01 - It's a great community here, make the most of it and you will appreciate how good it is.
    JrRacinFan says thanks.
  12. JrRacinFan

    JrRacinFan Served 5k and counting ...

    Joined:
    Mar 17, 2007
    Messages:
    19,414 (7.48/day)
    Thanks Received:
    4,483
    Location:
    Youngstown, OH
    @cdawall

    How much IMC volts you think I will end up needing for 1600 cl6? Rated spec for the upcoming ridgebacks.

    I can do 2.6Ghz @ 1.33v on cpu nb.
  13. cdawall where the hell are my stars

    Joined:
    Jul 23, 2006
    Messages:
    20,643 (7.29/day)
    Thanks Received:
    2,969
    Location:
    some AF base
    shouldn't need to do over 1.4v on a C3 chip C2 is a little looser and can be up to 1.5v just make sure if you start to push those volts up the whole chip is running hot otherwise it will pop.
    JrRacinFan says thanks.
  14. de.das.dude

    de.das.dude Pro Indian Modder

    Joined:
    Jun 13, 2010
    Messages:
    7,423 (5.26/day)
    Thanks Received:
    1,909
    i think i am stuck at 3.4GHz. :(
  15. cdawall where the hell are my stars

    Joined:
    Jul 23, 2006
    Messages:
    20,643 (7.29/day)
    Thanks Received:
    2,969
    Location:
    some AF base
    if you are still running that powersupply in your sys specs i would bet thats the issue. dirty power hurts clocking. shoot me your settings i will see if i can squeeze some more out.
  16. JrRacinFan

    JrRacinFan Served 5k and counting ...

    Joined:
    Mar 17, 2007
    Messages:
    19,414 (7.48/day)
    Thanks Received:
    4,483
    Location:
    Youngstown, OH
    These Ridgebacks are insane!
    [​IMG]
    LifeOnMars says thanks.
  17. LifeOnMars

    LifeOnMars New Member

    Joined:
    Jun 20, 2008
    Messages:
    2,566 (1.20/day)
    Thanks Received:
    396
    Location:
    Kettering,Northants. UK
  18. JrRacinFan

    JrRacinFan Served 5k and counting ...

    Joined:
    Mar 17, 2007
    Messages:
    19,414 (7.48/day)
    Thanks Received:
    4,483
    Location:
    Youngstown, OH
    That's 1.65v. Actually topping out the IMC on my chip for that can't go past 1835 cl7 unless i push an insane amount of cpu/nb voltage and doesnt matter if I push CL9 or not, I think it's due to having an unlocked x2. Thanks man! :)
    LifeOnMars says thanks.
  19. de.das.dude

    de.das.dude Pro Indian Modder

    Joined:
    Jun 13, 2010
    Messages:
    7,423 (5.26/day)
    Thanks Received:
    1,909
    maybe, maybe i need a better cooler. anything past 3.4 and the CPU starts acting like a bitch. memory is not in the question.
  20. de.das.dude

    de.das.dude Pro Indian Modder

    Joined:
    Jun 13, 2010
    Messages:
    7,423 (5.26/day)
    Thanks Received:
    1,909
  21. JrRacinFan

    JrRacinFan Served 5k and counting ...

    Joined:
    Mar 17, 2007
    Messages:
    19,414 (7.48/day)
    Thanks Received:
    4,483
    Location:
    Youngstown, OH
    Do show .....:)
  22. LifeOnMars

    LifeOnMars New Member

    Joined:
    Jun 20, 2008
    Messages:
    2,566 (1.20/day)
    Thanks Received:
    396
    Location:
    Kettering,Northants. UK
    de das dude.....have you taken a hit from cyberdruid's bong cooler :D;)
    JrRacinFan says thanks.
  23. Corduroy_Jr

    Corduroy_Jr New Member

    Joined:
    Oct 26, 2009
    Messages:
    1,102 (0.67/day)
    Thanks Received:
    60
    Location:
    barrie ont
    hahaha no doubt man
  24. erocker

    erocker Super Moderator Staff Member

    Joined:
    Jul 19, 2006
    Messages:
    39,155 (13.81/day)
    Thanks Received:
    13,607
    de.das.dude, LifeOnMars and JrRacinFan say thanks.
  25. Velvet Wafer

    Velvet Wafer New Member

    Joined:
    Jun 16, 2009
    Messages:
    5,123 (2.89/day)
    Thanks Received:
    990
    Location:
    North of Germany
    *sigh*:rolleyes:

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)

Share This Page