Discussion in 'techPowerUp! Club Forum' started by t77snapshot, Feb 8, 2010.
I have two large bags of zip ties.
New to Forum and Club if you will have me
Hiya Guys I am addicted like many of you are of Modding Pc's. I belong to a couple other Pc forums and clubs but i just founf this forum so i am hoping i fit right in well.I have done many of Builds but heres my Latest Nzxt Phantom.
Cpu: Intel i5 2500K @ 5 Ghz (XSPC Waterblock)
Motherboard: AsRock Fatal1ty P67 Proffesional
Ram: 4 gig Corsair Dominator Gt's @ 2137mhz 22.214.171.124 (Ek Waterblock)
Video Card: Power Color HD6970 @ 1000/1500 (EK Waterblock and ram Plate)
PSU: Cougar SX850 (Fully sleeved and painted)
Hdd's: 1 60gig OCZ SSD, 1 WD Black 2tb,1 Hitachi 1 tb
Case: Modded Nzxt Phantom
Other: 1 RS360 Rad uptop with 5 fans push/pull,1 240 Rad on Bottom 2 fans at moment but will be push/pull soon.,All premium 1/2"IDx3/4"OD Tubing, All compression fittings are Bitspower.Xspc reservoir and pump,Antec Veris with remote,Custom window Mod,Hard drive cage mods,Power buttons and Fan controller Led's all modded to white led's Custom SSD Drive mounting (appears to float) some white cathodes and leds here and there.Also some other stuff i cant think of right this sec.
Heres a couple Photos of it.Sorry i dont have a good camera yet.Only an iPhone to take pictures:
Anyway Nice to meet you all and hope to be around for a long time.
Looks great man.
That is one nice looking phantom.
But you are a little young to be building your own computers.
Welcome to the Nzxt case club!
Way to make full use out of the Phantom's. Your rig looks clean bro.. I like the the way you mounted the ssd and that window design looks sweet. Although I have to say I haven't seen a ram w'cooler in a long time lol! What are your load temps like on the cpu/gpu?
very sweet looking Phantom
Cpu under full load Prime95 56c @4.8 ghz and around 61c max @ 5ghz Full load.
Gpu: i never seen it go ever 41c even playing Bf3 Ultra settings.It runs very cool i was happy with the end results. I am still adding 2 more Fans to the bottom rad for push/pull but i am just to lazy to drain the system to rip the Rad out.
Wow those are some good temps you have there! I wouldn't even bother with the 2 fans, your cooling setup seems to be perform well.
I have had it up to 71c using Intel Burntest on max settings running 5.1ghz @ 1.5 volts so the other 2 fans will help that a little.Also i am working on painting my Phantom maby a design on the front with black flames heading down the sides.This will all be done with a Automotive Basecoat/Clearcoat System using Adhesion Promoter also to make sure it stays.I will be shooting the whole thing with a full size HVLP Gun and a detail gun.I was also thinking of painting the white over also with a bright white and adding real pearl to the paint,also adding pearl to the black.I am Just struggling with the design at the moment i have done many drawings so far and not good enough.
Here is an old laptop i just practiced on to see how the paint system works on plastic and the results are almost smooth as glass.I will be still wetsanding and buffing the clear out to look like glass smooth.anyway here it is,remember this was just practice.
After: (sanded and applied Adhesion promoter ,Primed,applied Metallic blue basecoat,Added a midcoat metallic clear,and then 5 or so coats of gloss clearcoat.will wetsand and polish in a couple weaks of paint fully curing:
No idea why the white seems yeloish in the pictures,Its pure white with metallic flakes in it.Also the photos make it look bumpy,its not it is the metellic flakes in the photo that make it seem that way.
Hope you guys like it.
Very nice. I believe it's white.
It looks yellowish due to white balance. Some cameras have adjustment for that, some don't.
Or use better ambient lighting. It's mainly a problem in dark rooms.
Hello, this is mi NZXT H2, only real mod I did is a hole for my memory reader, hehe, but theres not many of these.
My specs are:
NZXT Technologies H2, Noctua CPU Cooler NH-U12P, Noctua Ultra Silent 140mm Fan, Corsair Vengeance Low Profile 8 GB, AMD Phenom II X6 1100T Black Edition, ASUS Sabertooth 990FX, AMD Radeon HD 6870 1 GB DDR5, 700 Watt - Coolmax, Partial Modular PSU, Lite-On LightScribe 24X SATA DVD+/-RW, 17 in 1 Memory Card Reader/Writer.
guys im planning on buying a new case and i really like the phantom design but i have a CM cpu cooler and i thinfk it would not fit if i apply a fan to the sidepanel. does anyone can help here..
Welcome to the Nzxt Club SurfSandman!
Nice to have another H2 owner in the club haha. Your setup looks sweet.. Nice card reader mod too
Better join in the fun here. Posting a pic of my Source 210 White. Still a work in progress.
Any update if theres gonna be a replace usb panel on the phantom? To switch it from the 2.0-3.0.
There will be
Can I get into the club with my Lexa S? =)
Hey, I noticed a few of us haven't yet been added! Update the list. =))
any time frame on the usb 3 on the phantom?
most of the Phantoms have USB 3.0 now
The Switch 810 looks good.
it's big that much I can say for sure. I just got it today and have no idea when I will be able to get to it
Separate names with a comma.