Discussion in 'Overclocking & Cooling' started by d1nky, Sep 23, 2013.
Can you go more with nb freq? That will help
I am sure I can haven't really tried
That will help quite a bit. Also make sure you use the stilts program for 32m..
I am trying to remember what the voltage setting for that is.. been benching 4770k lately.. i think its nb voltage depending on the board..
Here's a result with an 8350 from a little while ago.. i have a 9370 to test very soon.
The gigabyte board was ok, but limited memory quite a bit..
The Asus cross hair i have is much better.
Yea I just need to sit and play with it. From the looks of it I will have to push the memory quite a bit to keep ahead may break out the old single sided hcf0's and go for cas 6 clocks.
Also try higher MHz... with higher cas... different amd boards tend to like different mem settings.
What board Are you running? Also i would bench on xp sp3. Trimmed down version for performance.
Yea I am using the psc clocking bios now on mine. I may have to break out one of the others. Although with a 5ghz cap I may just push my b97 and ch3 up with 1800 cas 6.
Chvf non-z for the 9370 with samsung ram. I have a xp disk I have just not cared enough to try. As a team caption I can't actually win anyway
Do it just for fun.... everybody loves examples and it gives everybody a score to beat
I'll post a quick and dirty Intel score in a bit as a good basis
I'm working on it. Got to get the bastard stableish first...already miss my big watercooler.
Lol.. maybe try lapping the processor?
Nah just going to set it outside and use the subzero temps.
lapping doesn't make a massive difference unless you are already at optimal temps, I lapped mine and lost about 5*c now I can bench on a standard loop at stupid speeds and keep below 30*c on a coldish day!
Not sure I agree.. i am seen the heatspreader on some chops way off.. A 4770k I did was so low in the middle the cooler didn't make decent contact at all.. i also delidded it and that made a huge difference. . Can bench 5ghz air all day long
I might just lap my new 9370.. really depends if it's a decent chip.. others I'll rma
my 8350 was pretty new and flat, you also got to lap both block and IHS.
but again 5*c or near is a huge difference, no matter the ambients!
nom nom nom
im going to see if i can beat that 5ghz superpi, atm im trying to be top h20 8350!
and steponz, what a nice 3d11 score! imagine those on Ln2 or water
good seeing TPU hwbot so active!
I was able to hit a 5ghz run, 1st run and didn't really do anything special!
Apart from take 12 seconds off the top AMD 5ghz run!!
Ah you want to play in xp
im not competing but just giving ya a nudge to do better!
XP is beast for all 2d benches!
Oh I know I'm not technically competing either just setting a benchmark for people to beat. Xp is installing now on one of my benchmark ssd's so we will see.
I can't get 3Dmark 2001SE to run in win 7. I tried running it in different compatibility modes and a as admin but neither helped i still keep getting the 128MB of memory not found error.
Dammit d1nky you msde me swap my ram. My bbse was a full 500ms slower
don't worry, johan made me swap my loop around and lap my chip!
these ripjaws are doing ok tho..
Just gave ya a little push D1nky and look what it's done to ya. Everytime I turn around you're beating me.
Separate names with a comma.