1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

TPU's F@H Team

Discussion in 'Folding@Home' started by W2hCYK, Jun 10, 2006.

  1. Irony

    Irony

    Joined:
    Sep 25, 2011
    Messages:
    1,721 (1.66/day)
    Thanks Received:
    442
    Location:
    Outer Rim system of the interwebz
    Lol. I hope you get it fixed easy

    Expected ppd it says is about 160k, looking forward to that
    manofthem says thanks.
    Crunching for Team TPU
  2. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    [​IMG]


    Got it running. Had to drain it, dismantle the bottom section where the res goes to the pump, followed by reinstallation. Only difference this time was that I started with a little less coolant in the res, and it started right up. So, air trapped or bubbles? Who knows?

    Now if all goes according to plan from here on out, I'll be folding tonight on both 290s! :D. I'm letting it run to get any bubbles out and then it'll be time to wire it all up.



    Edit: I'll post some pics later tonight once it gets back into action. Also I'm eager to see the power consumption of this rig, 4770k crunching with 2x 290s folding :eek:
    Last edited: Jun 2, 2014
    Crunching for Team TPU More than 25k PPD
  3. Irony

    Irony

    Joined:
    Sep 25, 2011
    Messages:
    1,721 (1.66/day)
    Thanks Received:
    442
    Location:
    Outer Rim system of the interwebz
    I have a question. How does one go about getting a crunching or folding badge?
    Crunching for Team TPU
  4. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    After earning 100k pts in either crunching and/or folding, go into your preferences and fill in your respective info: Voila! Badges

    [​IMG]

    [​IMG]
    laptop-hpc, xvi, mx500torid and 4 others say thanks.
    Crunching for Team TPU More than 25k PPD
  5. Irony

    Irony

    Joined:
    Sep 25, 2011
    Messages:
    1,721 (1.66/day)
    Thanks Received:
    442
    Location:
    Outer Rim system of the interwebz
    Thank you! I've been trying to figure it out for a while now, lol. *facepalm*

    Edit: It works!! I'm so happy, lol
    Last edited: Jun 3, 2014
    BUCK NASTY and manofthem say thanks.
    Crunching for Team TPU
  6. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    Just got the second 290 folding just a little bit ago, and it looks like it's going alright. So far, with the cards folding and the cpu crunching, it's pulling an average of ~505-510W. Not too bad I suppose :D

    Temps aren't too bad at all. So far, card 2 is right about where my only card used to be, so it means both cards are folding with temps better than or equal to what the one was doing prior to the changes, all the while being very quiet ;) Granted, I can feel the difference in the heat now :p

    [​IMG]


    I'll be keeping an eye on it to make sure nothing crashes, freezes, and/or bsods.
    laptop-hpc, xvi, stinger608 and 4 others say thanks.
    Crunching for Team TPU More than 25k PPD
  7. johnspack

    johnspack

    Joined:
    Oct 6, 2007
    Messages:
    4,346 (1.75/day)
    Thanks Received:
    842
    Location:
    Nelson B.C. Canada
    Oh well, had to give up my 680 deal. Need to finish up repaying debts, then I'll be hunting. I'll run the 2nd 480 until it chokes, which should be by the end of this month! If it goes sooner, well, you'll know why....
    BUCK NASTY, manofthem and Irony say thanks.
  8. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    So fellas, question to ya'll...

    What would be a good upgrade from a 7770 for folding, something below a 280x/290? I want to have a gpu or 2 in mind in case I should decide to upgrade the 7770 in the future, and this way I can keep an eye for a nice deal. Nvidia or AMD, doesn't matter... ;)

    Any idea on how something like a 270x would fold? This shows its Compute Performance comparable to a 7950...
    Crunching for Team TPU More than 25k PPD
  9. thebluebumblebee

    thebluebumblebee

    Joined:
    Jul 2, 2008
    Messages:
    2,878 (1.30/day)
    Thanks Received:
    1,419
    manofthem and stinger608 say thanks.
    25 Million points folded for TPU
  10. bubbleawsome

    bubbleawsome

    Joined:
    Feb 21, 2014
    Messages:
    97 (0.63/day)
    Thanks Received:
    50
    Is that still true? Last I checked it was the other way around. Oh well. Doesn't matter unless you are CPU folding too.
  11. thebluebumblebee

    thebluebumblebee

    Joined:
    Jul 2, 2008
    Messages:
    2,878 (1.30/day)
    Thanks Received:
    1,419
    My 7770 only peaks at about 5% from time to time. My 660 Ti puts a constant 13% load on my 2600K.
    The person asking the question is a cruncher.
    xvi and manofthem say thanks.
    25 Million points folded for TPU
  12. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    Thanks for that chart, it's perfect. I had stumbled up on that before in passing, but I totally forgot about it :oops: And yes, cpu impact is good to consider since I'm also crunching on these rigs.
    Crunching for Team TPU More than 25k PPD
  13. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    You guys are a quiet bunch :laugh:


    So I just realized that after pausing F@H and BOINC on my i3 rig, I never resumed it so I think the 7770 was sitting idle for like 2 days or something :banghead: Resumed it last night.

    And on the brighter side, I think I solved my random reboots; I think it was related to my CPU OC. I dropped it down to 4.3, and it's been solid for like 2-3 days straight now. :rockout:
    stinger608, bubbleawsome and Norton say thanks.
    Crunching for Team TPU More than 25k PPD
  14. bubbleawsome

    bubbleawsome

    Joined:
    Feb 21, 2014
    Messages:
    97 (0.63/day)
    Thanks Received:
    50
    I've been having random reboots too and I think it is also my CPU oc. (I don't do BIONIC or anything, just CPU F@H.) I'd have to drop my OC down to 4.0 vs 4.3 or drop it to 4.2 and push voltage to 1.3 (versus 1.24 now.) sucks because I need the speed of 4.3 for gaming and streaming, but I don't have the cooling grunt for 1.3v. :| That's 40k ppd I'm out of right now.
    manofthem says thanks.
  15. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    You talking about the 4670k in your system specs? If so I understand the need for better cooling. I have the 4770k and I built a 4670k for my brother, and both had terrible temps! On my bro's 4670k, I threw a cheap Corsair air cooler and it helped but still I don't think it would reach 4.3 without delidding.

    Have you considered delidding?
    Crunching for Team TPU More than 25k PPD
  16. bubbleawsome

    bubbleawsome

    Joined:
    Feb 21, 2014
    Messages:
    97 (0.63/day)
    Thanks Received:
    50
    Yes but unless someone pays me or I get a summer job (which I will probably do) I can't risk killing the chip. Overclocking is bad enough, but there is no way to sneak delidding in to RMA. The sad thing is that I know my chip will take more, even though my hottest core will hit 80c my lowest stays around 67. If delidding evened that out I'd be happy at 1.3v, 4.2Ghz and 70c. Motherboard doesn't push 1.3v anyways, the numbers just turn red and won't go any higher.
    manofthem says thanks.
  17. Irony

    Irony

    Joined:
    Sep 25, 2011
    Messages:
    1,721 (1.66/day)
    Thanks Received:
    442
    Location:
    Outer Rim system of the interwebz
    I was trying to figure out some recent BSODs and somehow my NB voltage was at 1.4, changed it to 1.16, which is default and it's been fine for a day now. No clue how that happened
    xvi and manofthem say thanks.
    Crunching for Team TPU
  18. james888

    james888

    Joined:
    Jun 27, 2011
    Messages:
    4,279 (3.81/day)
    Thanks Received:
    1,423
    Got one 750ti folding. Just got it running, did no configuration. Don't have much time the next few days so a quick resource with this information would be nice.
    stinger608 and manofthem say thanks.
    Crunching for Team TPU
  19. Norton

    Norton WCG-TPU Team Captain

    Joined:
    Dec 21, 2011
    Messages:
    8,359 (8.83/day)
    Thanks Received:
    18,561
    Crunching for Team TPU More than 25k PPD
  20. manofthem

    manofthem

    Joined:
    Jan 9, 2011
    Messages:
    5,715 (4.42/day)
    Thanks Received:
    6,654
    I followed that link and it was pretty good.

    Make sure the team number is in and get your passkey whenever you can. Also to monitor your folding, open F@H Control... It took me a while to figure that out lol.
    Crunching for Team TPU More than 25k PPD
  21. thebluebumblebee

    thebluebumblebee

    Joined:
    Jul 2, 2008
    Messages:
    2,878 (1.30/day)
    Thanks Received:
    1,419
    What's your log saying? I can't find that they fixed F@H on the Maxwell GPU's.
    25 Million points folded for TPU
  22. james888

    james888

    Joined:
    Jun 27, 2011
    Messages:
    4,279 (3.81/day)
    Thanks Received:
    1,423
    Thats nice. I got that far without it. FAH is pretty easy to set up then.
    I havn't finished my first WU but it is estimating I will have 28516 ppd. I don't know if that is accurate.

    Code:
    *********************** Log Started 2014-06-09T03:22:45Z ***********************
    03:22:45:************************* Folding@home Client *************************
    03:22:45:      Website: http://folding.stanford.edu/
    03:22:45:    Copyright: (c) 2009-2014 Stanford University
    03:22:45:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
    03:22:45:         Args: --open-web-control
    03:22:45:       Config: <none>
    03:22:45:******************************** Build ********************************
    03:22:45:      Version: 7.4.4
    03:22:45:         Date: Mar 4 2014
    03:22:45:         Time: 20:26:54
    03:22:45:      SVN Rev: 4130
    03:22:45:       Branch: fah/trunk/client
    03:22:45:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
    03:22:45:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
    03:22:45:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
    03:22:45:     Platform: win32 XP
    03:22:45:         Bits: 32
    03:22:45:         Mode: Release
    03:22:45:******************************* System ********************************
    03:22:45:          CPU: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
    03:22:45:       CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
    03:22:45:         CPUs: 4
    03:22:45:       Memory: 3.95GiB
    03:22:45:  Free Memory: 1.60GiB
    03:22:45:      Threads: WINDOWS_THREADS
    03:22:45:   OS Version: 6.1
    03:22:45:  Has Battery: false
    03:22:45:   On Battery: false
    03:22:45:   UTC Offset: -7
    03:22:45:          PID: 2372
    03:22:45:          CWD: C:/Users/user/AppData/Roaming/FAHClient
    03:22:45:           OS: Windows 7 Home Premium
    03:22:45:      OS Arch: AMD64
    03:22:45:         GPUs: 1
    03:22:45:        GPU 0: UNSUPPORTED: GM107 [GeForce GTX 750 Ti]
    03:22:45:         CUDA: 5.0
    03:22:45:  CUDA Driver: 6000
    03:22:45:Win32 Service: false
    03:22:45:***********************************************************************
    03:22:45:<config>
    03:22:45:  <!-- Folding Slots -->
    03:22:45:</config>
    03:22:45:Connecting to assign-GPU.stanford.edu:80
    03:22:45:Updated GPUs.txt
    03:22:45:Read GPUs.txt
    03:22:45:Trying to access database...
    03:22:45:Successfully acquired database lock
    03:22:45:Enabled folding slot 00: PAUSED cpu:2 (not configured)
    03:22:45:Enabled folding slot 01: PAUSED gpu:0:GM107 [GeForce GTX 750 Ti] (not configured)
    03:22:50:10:127.0.0.1:New Web connection
    03:23:46:Saving configuration to config.xml
    03:23:46:<config>
    03:23:46:  <!-- Folding Slots -->
    03:23:46:  <slot id='0' type='CPU'/>
    03:23:46:  <slot id='1' type='GPU'/>
    03:23:46:</config>
    03:23:46:Set client configured
    03:23:46:WU00:FS00:Connecting to 171.67.108.200:8080
    03:23:46:WU01:FS01:Connecting to 171.67.108.200:8080
    03:23:46:WU00:FS00:Connecting to 171.67.108.200:8080
    03:23:46:WU01:FS01:Connecting to 171.67.108.201:80
    03:23:47:WU00:FS00:Assigned to work server 171.67.108.60
    03:23:47:WU00:FS00:Requesting new work unit for slot 00: READY cpu:2 from 171.67.108.60
    03:23:47:WU00:FS00:Connecting to 171.67.108.60:8080
    03:23:47:WU01:FS01:Assigned to work server 171.64.65.105
    03:23:47:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM107 [GeForce GTX 750 Ti] from 171.64.65.105
    03:23:47:WU01:FS01:Connecting to 171.64.65.105:8080
    03:23:47:WU00:FS00:Downloading 532.25KiB
    03:23:47:WU01:FS01:Downloading 122.67KiB
    03:23:48:WU01:FS01:Download complete
    03:23:48:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:7623 run:462 clone:0 gen:131 core:0x15 unit:0x000000be664f2dd14fe4fb0b0a4e9596
    03:23:48:WU01:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah
    03:23:48:WU01:FS01:Connecting to web.stanford.edu:80
    03:23:48:WU01:FS01:FahCore 15: Downloading 1.88MiB
    03:23:48:WU00:FS00:Download complete
    03:23:48:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:9500 run:1217 clone:1 gen:130 core:0xa4 unit:0x000000946652edcc53642d31ef8e4c46
    03:23:48:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah
    03:23:48:WU00:FS00:Connecting to web.stanford.edu:80
    03:23:48:WU00:FS00:FahCore a4: Downloading 2.89MiB
    03:23:52:WU01:FS01:FahCore 15: Download complete
    03:23:52:WU01:FS01:Valid core signature
    03:23:52:WU01:FS01:Unpacked 7.71MiB to cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe
    03:23:52:WU01:FS01:Starting
    03:23:52:WU01:FS01:Running FahCore: "D:\Program Files\Folding\FAHClient/FAHCoreWrapper.exe" C:/Users/user/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 704 -lifeline 2372 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
    03:23:52:WU01:FS01:Started FahCore on PID 6548
    03:23:52:WU01:FS01:Core PID:6568
    03:23:52:WU01:FS01:FahCore 0x15 started
    03:23:53:WU01:FS01:0x15:
    03:23:53:WU01:FS01:0x15:*------------------------------*
    03:23:53:WU01:FS01:0x15:Folding@Home GPU Core
    03:23:53:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
    03:23:53:WU01:FS01:0x15:Build host             AmoebaRemote
    03:23:53:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
    03:23:53:WU01:FS01:0x15:Core                   15
    03:23:53:WU01:FS01:0x15:
    03:23:53:WU01:FS01:0x15:Window's signal control handler registered.
    03:23:53:WU01:FS01:0x15:Preparing to commence simulation
    03:23:53:WU01:FS01:0x15:- Looking at optimizations...
    03:23:53:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
    03:23:53:WU01:FS01:0x15:- Created dyn
    03:23:53:WU01:FS01:0x15:- Files status OK
    03:23:53:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
    03:23:53:WU01:FS01:0x15:- Expanded 125102 -> 501826 (decompressed 401.1 percent)
    03:23:53:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=125102 data_size=501826, decompressed_data_size=501826 diff=0
    03:23:53:WU01:FS01:0x15:- Digital signature verified
    03:23:53:WU01:FS01:0x15:
    03:23:53:WU01:FS01:0x15:Project: 7623 (Run 462, Clone 0, Gen 131)
    03:23:53:WU01:FS01:0x15:
    03:23:53:WU01:FS01:0x15:Assembly optimizations on if available.
    03:23:53:WU01:FS01:0x15:Entering M.D.
    03:23:54:WU00:FS00:FahCore a4: 95.22%
    03:23:54:WU00:FS00:FahCore a4: Download complete
    03:23:54:WU00:FS00:Valid core signature
    03:23:54:WU00:FS00:Unpacked 9.59MiB to cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
    03:23:54:WU00:FS00:Starting
    03:23:54:WU00:FS00:Running FahCore: "D:\Program Files\Folding\FAHClient/FAHCoreWrapper.exe" C:/Users/user/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 2372 -checkpoint 15 -np 2
    03:23:54:WU00:FS00:Started FahCore on PID 6588
    03:23:55:WU00:FS00:Core PID:6728
    03:23:55:WU00:FS00:FahCore 0xa4 started
    03:23:55:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  1720356884 833160639 2691419346 2426886926 1451605978
    03:23:55:WU01:FS01:0x15:GPU device id=0
    03:23:55:WU01:FS01:0x15:Working on Protein
    03:23:55:WU01:FS01:0x15:Client config unavailable.
    03:23:55:WU01:FS01:0x15:Starting GUI Server
    03:24:01:WU00:FS00:0xa4:
    03:24:01:WU00:FS00:0xa4:*------------------------------*
    03:24:01:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
    03:24:01:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
    03:24:01:WU00:FS00:0xa4:
    03:24:01:WU00:FS00:0xa4:Preparing to commence simulation
    03:24:01:WU00:FS00:0xa4:- Looking at optimizations...
    03:24:05:WU00:FS00:0xa4:- Created dyn
    03:24:05:WU00:FS00:0xa4:- Files status OK
    03:24:05:WU00:FS00:0xa4:- Expanded 544511 -> 1306268 (decompressed 239.8 percent)
    03:24:05:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=544511 data_size=1306268, decompressed_data_size=1306268 diff=0
    03:24:05:WU00:FS00:0xa4:- Digital signature verified
    03:24:05:WU00:FS00:0xa4:
    03:24:05:WU00:FS00:0xa4:Project: 9500 (Run 1217, Clone 1, Gen 130)
    03:24:05:WU00:FS00:0xa4:
    03:24:08:WU00:FS00:0xa4:Assembly optimizations on if available.
    03:24:08:WU00:FS00:0xa4:Entering M.D.
    03:24:19:WU00:FS00:0xa4:Mapping NT from 2 to 2
    03:25:06:WU01:FS01:0x15:Setting checkpoint frequency: 400000
    03:25:06:WU01:FS01:0x15:Completed         3 out of 40000000 steps (0%).
    03:25:52:WU00:FS00:0xa4:Completed 0 out of 250000 steps  (0%)
    03:32:17:WU01:FS01:0x15:Completed    400000 out of 40000000 steps (1%).
    03:38:18:FS00:Shutting core down
    03:38:20:WU00:FS00:0xa4:Client no longer detected. Shutting down core
    03:38:20:WU00:FS00:0xa4:
    03:38:20:WU00:FS00:0xa4:Folding@home Core Shutdown: CLIENT_DIED
    03:38:20:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
    03:38:20:WU00:FS00:Starting
    03:38:20:WARNING:WU00:FS00:Changed SMP threads from 2 to 3 this can cause some work units to fail
    03:38:20:WU00:FS00:Running FahCore: "D:\Program Files\Folding\FAHClient/FAHCoreWrapper.exe" C:/Users/user/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 2372 -checkpoint 15 -np 3
    03:38:20:WU00:FS00:Started FahCore on PID 6840
    03:38:20:WU00:FS00:Core PID:4964
    03:38:20:WU00:FS00:FahCore 0xa4 started
    03:38:21:WU00:FS00:0xa4:
    03:38:21:WU00:FS00:0xa4:*------------------------------*
    03:38:21:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
    03:38:21:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
    03:38:21:WU00:FS00:0xa4:
    03:38:21:WU00:FS00:0xa4:Preparing to commence simulation
    03:38:21:WU00:FS00:0xa4:- Looking at optimizations...
    03:38:21:WU00:FS00:0xa4:- Files status OK
    03:38:21:WU00:FS00:0xa4:- Expanded 544511 -> 1306268 (decompressed 239.8 percent)
    03:38:21:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=544511 data_size=1306268, decompressed_data_size=1306268 diff=0
    03:38:21:WU00:FS00:0xa4:- Digital signature verified
    03:38:21:WU00:FS00:0xa4:
    03:38:21:WU00:FS00:0xa4:Project: 9500 (Run 1217, Clone 1, Gen 130)
    03:38:21:WU00:FS00:0xa4:
    03:38:21:WU00:FS00:0xa4:Assembly optimizations on if available.
    03:38:21:WU00:FS00:0xa4:Entering M.D.
    03:38:26:FS00:Shutting core down
    03:38:26:FS01:Shutting core down
    03:38:27:WU00:FS00:0xa4:Mapping NT from 3 to 3
    03:38:30:FS00:Shutting core down
    03:38:30:FS01:Shutting core down
    03:38:30:WU00:FS00:0xa4:Client no longer detected. Shutting down core
    03:38:30:WU00:FS00:0xa4:
    03:38:30:WU00:FS00:0xa4:Folding@home Core Shutdown: CLIENT_DIED
    03:38:31:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
    03:38:33:WU01:FS01:0x15:Client no longer detected. Shutting down core
    03:38:33:WU01:FS01:0x15:
    03:38:33:WU01:FS01:0x15:Folding@home Core Shutdown: CLIENT_DIED
    03:38:33:WU01:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
    03:38:40:WU01:FS01:Starting
    03:38:40:WU01:FS01:Running FahCore: "D:\Program Files\Folding\FAHClient/FAHCoreWrapper.exe" C:/Users/user/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 704 -lifeline 2372 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
    03:38:40:WU01:FS01:Started FahCore on PID 6384
    03:38:40:WU01:FS01:Core PID:4800
    03:38:40:WU01:FS01:FahCore 0x15 started
    03:38:40:WU01:FS01:0x15:
    03:38:40:WU01:FS01:0x15:*------------------------------*
    03:38:40:WU01:FS01:0x15:Folding@Home GPU Core
    03:38:40:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
    03:38:40:WU01:FS01:0x15:Build host             AmoebaRemote
    03:38:40:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
    03:38:40:WU01:FS01:0x15:Core                   15
    03:38:40:WU01:FS01:0x15:
    03:38:40:WU01:FS01:0x15:Window's signal control handler registered.
    03:38:40:WU01:FS01:0x15:Preparing to commence simulation
    03:38:40:WU01:FS01:0x15:- Looking at optimizations...
    03:38:40:WU01:FS01:0x15:- Files status OK
    03:38:40:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
    03:38:40:WU01:FS01:0x15:- Expanded 125102 -> 501826 (decompressed 401.1 percent)
    03:38:40:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=125102 data_size=501826, decompressed_data_size=501826 diff=0
    03:38:40:WU01:FS01:0x15:- Digital signature verified
    03:38:40:WU01:FS01:0x15:
    03:38:40:WU01:FS01:0x15:Project: 7623 (Run 462, Clone 0, Gen 131)
    03:38:40:WU01:FS01:0x15:
    03:38:40:WU01:FS01:0x15:Assembly optimizations on if available.
    03:38:40:WU01:FS01:0x15:Entering M.D.
    03:38:42:WU01:FS01:0x15:Will resume from checkpoint file 01/wudata_01.ckp
    03:38:42:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  1720356884 833160639 2691419346 2426886926 1451605978
    03:38:42:WU01:FS01:0x15:GPU device id=0
    03:38:42:WU01:FS01:0x15:Working on Protein
    03:38:42:WU01:FS01:0x15:Client config unavailable.
    03:38:42:WU01:FS01:0x15:Starting GUI Server
    03:39:01:Saving configuration to config.xml
    03:39:01:<config>
    03:39:01:  <!-- Slot Control -->
    03:39:01:  <power v='FULL'/>
    03:39:01:
    03:39:01:  <!-- User Information -->
    03:39:01:  <passkey v='********************************'/>
    03:39:01:  <team v='50711'/>
    03:39:01:  <user v='james888'/>
    03:39:01:
    03:39:01:  <!-- Folding Slots -->
    03:39:01:  <slot id='0' type='CPU'/>
    03:39:01:  <slot id='1' type='GPU'/>
    03:39:01:</config>
    03:39:20:WU00:FS00:Starting
    03:39:20:WU00:FS00:Running FahCore: "D:\Program Files\Folding\FAHClient/FAHCoreWrapper.exe" C:/Users/user/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 2372 -checkpoint 15 -np 3
    03:39:20:WU00:FS00:Started FahCore on PID 6240
    03:39:20:WU00:FS00:Core PID:3412
    03:39:20:WU00:FS00:FahCore 0xa4 started
    03:39:21:WU00:FS00:0xa4:
    03:39:21:WU00:FS00:0xa4:*------------------------------*
    03:39:21:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
    03:39:21:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
    03:39:21:WU00:FS00:0xa4:
    03:39:21:WU00:FS00:0xa4:Preparing to commence simulation
    03:39:21:WU00:FS00:0xa4:- Looking at optimizations...
    03:39:21:WU00:FS00:0xa4:- Files status OK
    03:39:21:WU00:FS00:0xa4:- Expanded 544511 -> 1306268 (decompressed 239.8 percent)
    03:39:21:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=544511 data_size=1306268, decompressed_data_size=1306268 diff=0
    03:39:21:WU00:FS00:0xa4:- Digital signature verified
    03:39:21:WU00:FS00:0xa4:
    03:39:21:WU00:FS00:0xa4:Project: 9500 (Run 1217, Clone 1, Gen 130)
    03:39:21:WU00:FS00:0xa4:
    03:39:21:WU00:FS00:0xa4:Assembly optimizations on if available.
    03:39:21:WU00:FS00:0xa4:Entering M.D.
    03:39:27:WU00:FS00:0xa4:Mapping NT from 3 to 3
    03:39:45:WU01:FS01:0x15:Resuming from checkpoint
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: retreived and current tpr file hash:
    03:39:45:WU01:FS01:0x15:   0   1720356884   1720356884
    03:39:45:WU01:FS01:0x15:   1    833160639    833160639
    03:39:45:WU01:FS01:0x15:   2   2691419346   2691419346
    03:39:45:WU01:FS01:0x15:   3   2426886926   2426886926
    03:39:45:WU01:FS01:0x15:   4   1451605978   1451605978
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: file hashes same.
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: state restored.
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: name 01/wudata_01.log Verified 01/wudata_01.log
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: name 01/wudata_01.trr Verified 01/wudata_01.trr
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: name 01/wudata_01.xtc Verified 01/wudata_01.xtc
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: name 01/wudata_01.edr Verified 01/wudata_01.edr
    03:39:45:WU01:FS01:0x15:fcCheckPointResume: state restored 2
    03:39:45:WU01:FS01:0x15:Resumed from checkpoint
    03:39:45:WU01:FS01:0x15:Setting checkpoint frequency: 400000
    03:39:45:WU01:FS01:0x15:Completed    400001 out of 40000000 steps (1%).
    03:39:46:WARNING:WU01:FS01:Detected clock skew (1 mins 06 secs), adjusting time estimates
    03:41:26:WU00:FS00:0xa4:Completed 0 out of 250000 steps  (0%)
    03:41:41:49:127.0.0.1:New Web connection
    03:46:57:WU01:FS01:0x15:Completed    800000 out of 40000000 steps (2%).
    03:54:04:WU01:FS01:0x15:Completed   1200000 out of 40000000 steps (3%).
    04:01:11:WU01:FS01:0x15:Completed   1600000 out of 40000000 steps (4%).
    04:08:18:WU01:FS01:0x15:Completed   2000000 out of 40000000 steps (5%).
    04:15:24:WU01:FS01:0x15:Completed   2400000 out of 40000000 steps (6%).
    04:22:30:WU01:FS01:0x15:Completed   2800000 out of 40000000 steps (7%).
    04:29:36:WU01:FS01:0x15:Completed   3200000 out of 40000000 steps (8%).
    04:36:41:WU01:FS01:0x15:Completed   3600000 out of 40000000 steps (9%).
    04:43:47:WU01:FS01:0x15:Completed   4000000 out of 40000000 steps (10%).
    04:50:53:WU01:FS01:0x15:Completed   4400000 out of 40000000 steps (11%).
    04:57:59:WU01:FS01:0x15:Completed   4800000 out of 40000000 steps (12%).
    05:05:05:WU01:FS01:0x15:Completed   5200000 out of 40000000 steps (13%).
    05:12:11:WU01:FS01:0x15:Completed   5600000 out of 40000000 steps (14%).
    05:19:16:WU01:FS01:0x15:Completed   6000000 out of 40000000 steps (15%).
    05:26:22:WU01:FS01:0x15:Completed   6400000 out of 40000000 steps (16%).
    05:33:28:WU01:FS01:0x15:Completed   6800000 out of 40000000 steps (17%).
    05:40:34:WU01:FS01:0x15:Completed   7200000 out of 40000000 steps (18%).
    05:47:40:WU01:FS01:0x15:Completed   7600000 out of 40000000 steps (19%).
    05:54:46:WU01:FS01:0x15:Completed   8000000 out of 40000000 steps (20%).
    06:01:51:WU01:FS01:0x15:Completed   8400000 out of 40000000 steps (21%).
    06:08:57:WU01:FS01:0x15:Completed   8800000 out of 40000000 steps (22%).
    06:09:41:WU00:FS00:0xa4:Completed 2500 out of 250000 steps  (1%)
    06:16:03:WU01:FS01:0x15:Completed   9200000 out of 40000000 steps (23%).
    06:23:09:WU01:FS01:0x15:Completed   9600000 out of 40000000 steps (24%).
    06:30:15:WU01:FS01:0x15:Completed  10000000 out of 40000000 steps (25%).
    06:37:20:WU01:FS01:0x15:Completed  10400000 out of 40000000 steps (26%).
    06:44:26:WU01:FS01:0x15:Completed  10800000 out of 40000000 steps (27%).
    06:51:32:WU01:FS01:0x15:Completed  11200000 out of 40000000 steps (28%).
    06:58:38:WU01:FS01:0x15:Completed  11600000 out of 40000000 steps (29%).
    07:05:44:WU01:FS01:0x15:Completed  12000000 out of 40000000 steps (30%).
    07:12:50:WU01:FS01:0x15:Completed  12400000 out of 40000000 steps (31%).
    07:19:55:WU01:FS01:0x15:Completed  12800000 out of 40000000 steps (32%).
    07:27:02:WU01:FS01:0x15:Completed  13200000 out of 40000000 steps (33%).
    07:28:24:WU00:FS00:0xa4:Completed 5000 out of 250000 steps  (2%)
    07:34:07:WU01:FS01:0x15:Completed  13600000 out of 40000000 steps (34%).
    07:41:13:WU01:FS01:0x15:Completed  14000000 out of 40000000 steps (35%).
    07:48:19:WU01:FS01:0x15:Completed  14400000 out of 40000000 steps (36%).
    07:55:25:WU01:FS01:0x15:Completed  14800000 out of 40000000 steps (37%).
    08:02:31:WU01:FS01:0x15:Completed  15200000 out of 40000000 steps (38%).
    08:09:37:WU01:FS01:0x15:Completed  15600000 out of 40000000 steps (39%).
    08:16:43:WU01:FS01:0x15:Completed  16000000 out of 40000000 steps (40%).
    08:23:49:WU01:FS01:0x15:Completed  16400000 out of 40000000 steps (41%).
    08:30:55:WU01:FS01:0x15:Completed  16800000 out of 40000000 steps (42%).
    08:38:01:WU01:FS01:0x15:Completed  17200000 out of 40000000 steps (43%).
    08:45:07:WU01:FS01:0x15:Completed  17600000 out of 40000000 steps (44%).
    08:52:13:WU01:FS01:0x15:Completed  18000000 out of 40000000 steps (45%).
    08:59:19:WU01:FS01:0x15:Completed  18400000 out of 40000000 steps (46%).
    09:06:25:WU01:FS01:0x15:Completed  18800000 out of 40000000 steps (47%).
    09:13:30:WU01:FS01:0x15:Completed  19200000 out of 40000000 steps (48%).
    09:20:36:WU01:FS01:0x15:Completed  19600000 out of 40000000 steps (49%).
    ******************************* Date: 2014-06-09 *******************************
    09:27:42:WU01:FS01:0x15:Completed  20000000 out of 40000000 steps (50%).
    09:34:48:WU01:FS01:0x15:Completed  20400000 out of 40000000 steps (51%).
    09:41:54:WU01:FS01:0x15:Completed  20800000 out of 40000000 steps (52%).
    09:44:26:WU00:FS00:0xa4:Completed 7500 out of 250000 steps  (3%)
    09:49:00:WU01:FS01:0x15:Completed  21200000 out of 40000000 steps (53%).
    09:56:06:WU01:FS01:0x15:Completed  21600000 out of 40000000 steps (54%).
    10:03:12:WU01:FS01:0x15:Completed  22000000 out of 40000000 steps (55%).
    10:10:17:WU01:FS01:0x15:Completed  22400000 out of 40000000 steps (56%).
    10:17:23:WU01:FS01:0x15:Completed  22800000 out of 40000000 steps (57%).
    10:24:29:WU01:FS01:0x15:Completed  23200000 out of 40000000 steps (58%).
    10:31:35:WU01:FS01:0x15:Completed  23600000 out of 40000000 steps (59%).
    10:38:41:WU01:FS01:0x15:Completed  24000000 out of 40000000 steps (60%).
    10:45:47:WU01:FS01:0x15:Completed  24400000 out of 40000000 steps (61%).
    10:52:52:WU01:FS01:0x15:Completed  24800000 out of 40000000 steps (62%).
    10:59:58:WU01:FS01:0x15:Completed  25200000 out of 40000000 steps (63%).
    11:07:04:WU01:FS01:0x15:Completed  25600000 out of 40000000 steps (64%).
    11:10:54:74:127.0.0.1:New Web connection
    11:14:12:WU01:FS01:0x15:Completed  26000000 out of 40000000 steps (65%).
    11:20:27:WU00:FS00:0xa4:Completed 10000 out of 250000 steps  (4%)
    11:21:13:Saving configuration to config.xml
    11:21:13:<config>
    11:21:13:  <!-- Network -->
    11:21:13:  <proxy v=':8080'/>
    11:21:13:
    11:21:13:  <!-- Slot Control -->
    11:21:13:  <power v='FULL'/>
    11:21:13:
    11:21:13:  <!-- User Information -->
    11:21:13:  <passkey v='********************************'/>
    11:21:13:  <team v='50711'/>
    11:21:13:  <user v='james888'/>
    11:21:13:
    11:21:13:  <!-- Folding Slots -->
    11:21:13:  <slot id='1' type='GPU'/>
    11:21:13:</config>
    11:21:14:FS00:Shutting core down
    11:21:20:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
    11:21:20:WARNING:WU00:Slot ID 0 no longer exists and there are no other matching slots, dumping
    11:21:20:WU00:Sending unit results: id:00 state:SEND error:DUMPED project:9500 run:1217 clone:1 gen:130 core:0xa4 unit:0x000000946652edcc53642d31ef8e4c46
    11:21:20:WU00:Connecting to 171.67.108.60:8080
    11:21:20:WU00:Server responded WORK_ACK (400)
    11:21:20:WU00:Cleaning up
    11:21:22:WU01:FS01:0x15:Completed  26400000 out of 40000000 steps (66%).
    11:21:36:Saving configuration to config.xml
    11:21:36:<config>
    11:21:36:  <!-- Network -->
    11:21:36:  <proxy v=':8080'/>
    11:21:36:
    11:21:36:  <!-- Slot Control -->
    11:21:36:  <power v='FULL'/>
    11:21:36:
    11:21:36:  <!-- User Information -->
    11:21:36:  <passkey v='********************************'/>
    11:21:36:  <team v='50711'/>
    11:21:36:  <user v='james888'/>
    11:21:36:
    11:21:36:  <!-- Folding Slots -->
    11:21:36:  <slot id='1' type='GPU'/>
    11:21:36:</config>
    11:22:26:103:127.0.0.1:New Web connection
    
    Crunching for Team TPU
  23. thebluebumblebee

    thebluebumblebee

    Joined:
    Jul 2, 2008
    Messages:
    2,878 (1.30/day)
    Thanks Received:
    1,419
    Ah, I see, it's running core_15 WU's on that 750.
    That's nice PPD/watt. A GTX 560 Ti will do a little better, but it uses over 150 watts vs. your less than 50 watts.
    james888 says thanks.
    25 Million points folded for TPU
  24. james888

    james888

    Joined:
    Jun 27, 2011
    Messages:
    4,279 (3.81/day)
    Thanks Received:
    1,423
    That is the point of the 750ti. PPD/watt. Whisper quiet, and stays cool. When I get a chance I will overclock them a bit. I know I can get up to 1400mhz gaming stable.
    Crunching for Team TPU
  25. johnspack

    johnspack

    Joined:
    Oct 6, 2007
    Messages:
    4,346 (1.75/day)
    Thanks Received:
    842
    Location:
    Nelson B.C. Canada
    I'm finishing off paying for my new monitor, then I need a used 770 to replace my 480. Then I'll be hunting for folding cards. Need best bang for buck used, 660s? 660ti?

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)

Share This Page