- Joined
- May 23, 2014
- Messages
- 67 (0.02/day)
System Name | Semi-Modern |
---|---|
Processor | AMD R9-5950X (8c @ 4.65GHz, 8c @ 4.6GHz) |
Motherboard | Asus ROG Crosshair VIII Hero (non-WiFi) |
Cooling | EK-CoolStream PE 360 w/ Unifans, Alphacool NexXxoS ST30 280mm w/ 2 x NF A-14, EKWB Classic WB |
Memory | 32GB Corsair Vengeance Pro RGB DDR4-3200 |
Video Card(s) | EVGA RTX 3080 Ti FTW Ultra |
Storage | 1 x WD Black Gen 4 500GB, 1 x Samsung 980 Pro 1TB, 1 x 2TB SATA SSD, 2 x 4TB SATA SSD (Raid 0) |
Display(s) | 1 x LG 27GN950-B, 1 x LG 27UP600-W |
Case | Corsair 5000D |
Audio Device(s) | Focusrite Scarlett Solo |
Power Supply | Seasonic Flagship Prime 1000W Platinum |
Mouse | Logitech G502 Hero |
Keyboard | Glorious GMMK-RGB |
VR HMD | Oculus Rift, HTC Vive |
Software | Windows 11 |
Benchmark Scores | https://www.3dmark.com/spy/41015604 https://www.3dmark.com/pr/1830072 |
So, I have an 8350 on a Crosshair 5F, and to help combat the power draw, just a little bit, since I mine while I'm at work, which is 10-14 hours a day, I am deciding to set up an underclock profile for when I am at work and would like everyone's thoughts on if this should work as I intend it.
Currently, I have it at stock voltage, all 8 cores active and running a mild 4.4GHz. Ratio is at 22, and nothing else has been touched, aside from the Core On/Off function.
Since I have never done this, I am going to try:
Changing the Ration to 15 (3.0GHz) and lowering the Voltage to 1.15 (I think it runs at about 1.35 under most usage), and shutting down 4 of the cores.
Do any of you think that I will run into a problem with the boot process? Or should those settings work just fine?
Currently, I have it at stock voltage, all 8 cores active and running a mild 4.4GHz. Ratio is at 22, and nothing else has been touched, aside from the Core On/Off function.
Since I have never done this, I am going to try:
Changing the Ration to 15 (3.0GHz) and lowering the Voltage to 1.15 (I think it runs at about 1.35 under most usage), and shutting down 4 of the cores.
Do any of you think that I will run into a problem with the boot process? Or should those settings work just fine?