1. Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] Victoria SecRed

Discussion in 'Case Mod Gallery' started by jokrik, Nov 20, 2012.

  1. jokrik New Member

    Joined:
    Nov 20, 2012
    Messages:
    10 (0.01/day)
    Thanks Received:
    5
    To view this case mod, go here.

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]

    Specs:
    CPU : Motherboard i7 2600k @4.5ghz
    Motherboard : Asus Maximus V formula
    Graphics Asus GTX 670 TOP DCII @1210mhz / 7400mhz SLI
    RAM : G.Skill Ripjaws (4x4GB) 1866mhz
    PSU : Seasonic Platinum 860w
    Hard Drive : 256GB OCZ Vertex 4
    CPU WB: EK Supremacy
    Fans : 3 x NZXT 140mm White Fan
    Fans : 7 x Scythe Gentle Typhoon 1850 Rpm 120mm Fan
    Tube : EK Red UV Tubing
    Fittings : EK | Bitspower Fittings
    Radiator : EK 360 XTX Radiator and EK 240 XT Radiator
    GPU WB : EK GTX670 DCII Full Cover Waterblock
    Pump: Swiftech MCP355 Dual
    Pump Top : EK-DDC Dual - TOP
    Reservoir : EK Multioption X2 Res
    Windows 8 Pro
    Samsung s27a950dsl
    Filco Majestouch 2 blue
    NZXT Switch 810 - White
    Mouse ; Cyborg R.A.T 9
    Mouse Pad : Artisan Active Control Red
    Bose Companion 5
    Asus Xonar Phoebus
    Shure SRH 1440
    NZXT Sentry Mix

    Mods:
    Made a custom stand for my dual pump, screwed together with the front 140mm fans, made of aluminium for lightweight and custom paint it black to match the interior; specially design to get the airflow on the pump since DDC pump run pretty hot. Drill a few holes here and there for mounting purposes. Also the cable sleeving and the custom painted fan grills

    Updated, removed the zip ties and combed the cables better
     
    Last edited by a moderator: Aug 20, 2014
  2. NoFreeze

    NoFreeze New Member

    Joined:
    Nov 29, 2011
    Messages:
    22 (0.02/day)
    Thanks Received:
    1
    Location:
    indonesia
    its good for the hardware you used in there , but the installation for the liquid tube is kinda.....

    How to say it...... uhmmm (i dont like the coil in my preference , coz it really bother my eyes)


    But overall i give 7/10 , neat work buddy , keep it !!!
     
  3. BrianKid New Member

    Joined:
    Nov 20, 2012
    Messages:
    1 (0.00/day)
    Thanks Received:
    0
    Amazing Rig

    This is one sick looking rig!
    One of the better looking switch out there, what type of kink coil is that?
    the only thing I would do is to straighten up the tube from reservoir to pump, it bends a bit and my OCD just cant hold looking at it :D
     
  4. jokrik New Member

    Joined:
    Nov 20, 2012
    Messages:
    10 (0.01/day)
    Thanks Received:
    5
    Its not an anti kink :p its a well separated zip ties
    Not a fan of anti kink as well but i've no choice since my pump is too strong and shrinking (not kinking) the tube between the cpu - res - pump though only abit. Im not taking any risk therefore I leave the ties on, besides I kinda like the look of it
     

Currently Active Users Viewing This Thread: 1 (0 members and 1 guest)

Share This Page