X800 Temps after soft mod

[Orionzbelt]

I have just flashed my Connect 3d X800 Vivo to XT PE speeds and unlocked the other 4 pipes and was wondering what the normal load temps are as my gpu is reaching 68'c with the fan running at 100%.

I checked before what my card could handle using ati tool and it got up to 574/570 before i bottled it and hit the abort button i had no artifacts either.

Just wanted to know what temp to keep it below until i can put it on my water loop. another dumb question is what voltage should the agp set to in the Bios


ABIT IC7-MAX3
P42.8e @3.4 Watercooled
2 x 256 TWINXMS PC3200 CAS 2
ATI X800 PRO VIVO modded to XT PE
SATA 37.4 WD RAPTOR
IDE 160 SAMSUNG SPINPOINT
DVDRW NEC ND 3500
2x TT 120mm FAN
1x 90mm TT Side Fan
TT Tsunami Case
Tagan 480w

 

[Urlyin]

Orion... Normal temps for the stock HSF can verify, but most are around 60c-70c under load with stock mhz speeds. The GPU can handle up to 90c and is rated to 125c, however the cooler you keep it the longer it will last ... The X800 doesn't need the BIOS agp settings, set it to default...

I have just flashed my Connect 3d X800 Vivo to XT PE speeds and unlocked the other 4 pipes and was wondering what the normal load temps are as my gpu is reaching 68'c with the fan running at 100%.

I checked before what my card could handle using ati tool and it got up to 574/570 before i bottled it and hit the abort button i had no artifacts either.

Just wanted to know what temp to keep it below until i can put it on my water loop. another dumb question is what voltage should the agp set to in the Bios


ABIT IC7-MAX3
P42.8e @3.4 Watercooled
2 x 256 TWINXMS PC3200 CAS 2
ATI X800 PRO VIVO modded to XT PE
SATA 37.4 WD RAPTOR
IDE 160 SAMSUNG SPINPOINT
DVDRW NEC ND 3500
2x TT 120mm FAN
1x 90mm TT Side Fan
TT Tsunami Case
Tagan 480w