incognito666
New Member
- Joined
- May 25, 2006
- Messages
- 17 (0.00/day)
Processor | AMD Phenon Black Edition 3.2GHZ |
---|---|
Motherboard | Gigabyte GA-890FXA-UD5 AMD 890FX |
Cooling | Stock |
Memory | G.Skill Ripjaws-X 4GB (2x2GB) DDR3 PC3-12800 1600MHz Dual Channel |
Video Card(s) | Ati Radeon HD 550 |
Storage | 2TB (over 4 disks) |
Display(s) | HPw1907v |
Case | Coolmaster |
Audio Device(s) | Creative SoundBlaster Audigy2 Zs |
Software | Windows 7 |
Ive resently done a total rebuild on my pc, well replaced everything in the last 6 months
Ive got a few issues with intergrateing the fan controller that im useing to the new system
I am useing http://www.zalman.com/eng/product/Product_Read.asp?idx=341
The first problem i have is with the Collmaster case i now have, cant remember the model but it has 3 60mill fans and 1 120mill fan, all of which use a molex connector and not pwn. The fans do have a switch to alter the speed but that means opening the case up. Is there anyway of the fan controller to control them?
The second issue is with the new mobo and cpu cooler. I have resently installed a amd phenon II black edition. The fan uses a 4/5 ? pin connector ant the fan controller is 1 pin short. Is there anyway i can solve this
Currently my fan controller can only control 1 of the 5 fans i have
Any advice would be apreciated
Ive got a few issues with intergrateing the fan controller that im useing to the new system
I am useing http://www.zalman.com/eng/product/Product_Read.asp?idx=341
The first problem i have is with the Collmaster case i now have, cant remember the model but it has 3 60mill fans and 1 120mill fan, all of which use a molex connector and not pwn. The fans do have a switch to alter the speed but that means opening the case up. Is there anyway of the fan controller to control them?
The second issue is with the new mobo and cpu cooler. I have resently installed a amd phenon II black edition. The fan uses a 4/5 ? pin connector ant the fan controller is 1 pin short. Is there anyway i can solve this
Currently my fan controller can only control 1 of the 5 fans i have
Any advice would be apreciated