project geminii(vote's please)
More images (click for bigger version):
 |
 |
 |
 |
 |
| Owner: | erichuizer Send email Send private message |
| Posted: | Jun 8, 2007 |
| Last Update: | Jun 8, 2007 18:06 |
| Viewed: | 5,900 times |
| Rating: | Good (5.3) 3 votes total |
| Submit vote: | |
| Please register on the forums & login to vote. | |
Keywords:
System Specs:
» cpu: amd athlon64 3800+
» mb:asus m2n32 sli-deluxe
» gpu:oc'ed nvidia 7600gt
» hard-drive: samsung 233gb
Performed Mods:
painted inside of the case
cable-management
turned drivebays 90degrees
added lighting
changed side panel
changed gpu-cooler
added heatpipes to the motherboard(soldering)
normally the geminii is put on horizontally.
i orded one last week and got it. it didnt fit because my cpu was in the wrong direction. so i took my tools and made it fit:)
and now it vertically,which works also very nice...
just cooling passivelly at 54degrees maximum at full load:)
well just watch.
TPU's Case Mod Gallery is sponsored by Xoxide
User comments
Post your commentnice mods computer must be silent 9/10
well I see you changed the cooler from the stock one, looks good, are you going to put the fans on the cooler, It would blow some air on them hot heatpipes, I would still like to see that black tape removed, other then that looking better.
Nice CPU cooler you got there. Thou your specs are not that good but you have good lighting and its nice and clean.
There are three things I would suggest:
1-Put a 12 cm red LED fan on the back panel.
2-Put 2x 12cm red LED fan on the CPU cooler
3-Take off the black tape and change it for tubes.
IMO if you do that then your case would be very cool.
There are three things I would suggest:
1-Put a 12 cm red LED fan on the back panel.
2-Put 2x 12cm red LED fan on the CPU cooler
3-Take off the black tape and change it for tubes.
IMO if you do that then your case would be very cool.
