My Gold

Posted:
August 3rd 2012
Updated:
Viewed:
13,504 times
Rating:
Superb (8.4)
Voting Graph 32 votes total
Submit vote:
Please register on the forums & login to vote.
Key Features:
High Rated Intel CPU AMD Graphics AMD CrossFire Scratch Build Custom Paint Job Water-cooled
System Specs:
  • Intel I7 3770k, Gigabyte GA-Z77-UD5H Z77 S-1155 ATX, Corsair AX1200w, 2x XFX 5870 865/1300, 16Gb Corsair vengeance (4x4) 1600mhz 9-9-9-24, HDD's Two OCZ Vertex 3 120GB Raid0, 2x WD Green 1,5TB 7200rpm 64mb Raid0, 2x Samsung Spinpoint F3 1TB Raid0. Asus Xonar Essence STX souncard, Fans 18x SilenX 120mm & 4x Xigmatek 140mm, Fan controller: Sunbeam Rheobus-Extreme 6-channel 30w pr.channel,LG BE12 BLU-RAY,LG 27" 1920x1080 Flatron W2753V, NZXT led cables 4x 2m white and blue + custom made leds white/blue/orange/uv
Performed Mods:
Scratch build desk, performed by me. Painted fans, hdd rack, mb tray, all screwes used are painted aswell. Lots of mdpc sleeving and replaced all the fan housing from white to black. Made my own leds from scratch and also many fan extensions. the housing got hidden led cable lightning around the whole casing. The mb is taken from a Antec 1200 so i hade to cut that out from the steel casing. Fan controller and led controller modded. Lots of wood cutting, sanding and painting and also worked some with smoked acrylic for the fan intake grills and the led controll bracket. It also have a massive watercooling.
Watercooling: Radiator: xspc RX480 + RX480 v2, Swiftech D5 pumps x2, Xspc Raystorm + xspc acrylic reservoirs. Bitspower black compression fittings 1/2ID-5/8OD, Black Bitspower 45/90 degrees. Bitspower T-type connectors, Bitspower single rotary adapters 45 and 90 degree, Bitspower G1/4 2,5cm extenders, Bitspower plug & stop fittings.Black and blue O-rings, Tubing: Masterkleer 1/2 ID 5/8 OD + Clearflex, 2x EK(en)Acetal + nickel fullcover waterblocks for 5870. Big thanks to performance-pc's.com
Add your own comment

12 Comments on My Gold

#1
LetsDoDamage
This is absolutely stunning. I need this.

Or the skill, time and money for it. 10/10
Posted on Reply
#2
Jetster
Not only a nice build but a detailed description as well, and nice pics.
Posted on Reply
#3
solara2xb
Wow... This is a super nice build...
Posted on Reply
#4
titienzo18
it's to working or to playing?
superb, incredible, 10/10!!!
Posted on Reply
#5
Tiltentei
titienzo18it's to working or to playing?
superb, incredible, 10/10!!!
I use it for almost anything. Atm im playing a lot since there are so many games i havent been able to play while building this :)

Thanks for your great feadback people.
Posted on Reply
#6
titienzo18
one more time: superb build, and perfect pics.
Posted on Reply
#7
jgunning
this is a sick rig tiltentei... =) I like it alot!Inspiring! =)
Posted on Reply
#8
Aceman.au
10/10, if I had the motivation, I'd do something similar

Those 6 SSD's are nicely organised

I have 6 HDD's crammed into my 2nd PC for storage. And they are a complete mess, I can't put the side on without jamming cables up against the side, (it makes the side bulge). You've got room to move however and made it look amazing
Posted on Reply
#9
micropage7
Aceman.au10/10, if I had the motivation, I'd do something similar

Those 6 SSD's are nicely organised

I have 6 HDD's crammed into my 2nd PC for storage. And they are a complete mess, I can't put the side on without jamming cables up against the side, (it makes the side bulge). You've got room to move however and made it look amazing
standard case? some cases have small room on the back of it so thats pretty hard to manage many cables if you wanna run it clean
some cases have small hole on the back of motherboard tray so you can tie the cable and make it tight as possible so it wont bulge
Posted on Reply
#10
chvostoskok
Power up !
This is very nice rig, i like the Tron style, and that thing that its
white and all the inside is black.. so it looks great and clean !
I can appreciate that its simply different rig, not just moded case !

in fact, i found some minor mistakes, the desk is too thick,
usually when the board is thicker than 15cm -then is sitting uncomfortable.
and you have it about 28cm thick. and the sitting space is also a little bit too narrow.
Now you can change your LCD somewhat, its so ordinary and boring there, in past
besign. better would be position on wall without stand or -like in Tron..
do you agree_?

But: the whole is really outstanding and i like it very much!
Posted on Reply
#11
Tiltentei
chvostoskokPower up !
This is very nice rig, i like the Tron style, and that thing that its
white and all the inside is black.. so it looks great and clean !
I can appreciate that its simply different rig, not just moded case !

in fact, i found some minor mistakes, the desk is too thick,
usually when the board is thicker than 15cm -then is sitting uncomfortable.
and you have it about 28cm thick. and the sitting space is also a little bit too narrow.
Now you can change your LCD somewhat, its so ordinary and boring there, in past
besign. better would be position on wall without stand or -like in Tron..
do you agree_?

But: the whole is really outstanding and i like it very much!
It is not to thick, not to narrow,and absololutely not 28cm. I sit very comfortable when i use the desk and the lcd was placed there only when i took the pictures. The theme has nothing to do with Tron so i have no idea what your talking about. The desk is specially desgned for me and my use, and not for everyone out there.
Posted on Reply
#12
Zhian
this is quite a nice setup - I would like to ask if you still got the drawings you made for this table ? (: im about to "copy" this build but gonna add some more for it - it could be really awesome to c what you took into it and so on (:
Posted on Reply
Add your own comment
Apr 18th, 2024 19:30 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts