Antec 900 Turbine

Dayum! This show looks clean! Love the intake

btw.. how dusty does it get inside?

SOOOOOOO AWESOME (. Y .)

How much would it cost to post that from where you are to where I am heres my address

Cloud 9, Tell Him He's Dreamin' St, Dreamville

Damn why did someone pinch me

Anyway very nice and clean and looks kick ass .... if I ever get a job I will save for one and do what you done to the case ..... 10/10 ooh aah

love it all, but turn that freezer pro 90 degrees to face the right way...it looks as if its pullin the hot air off the vid card

i like what you did with the heat sink

by: SmoKie McPott

---

love it all, but turn that freezer pro 90 degrees to face the right way...it looks as if its pullin the hot air off the vid card

---

i dont think he can... due to the memory location

by: Sir Stunna Lot

---

i dont think he can... due to the memory location

---

I can't because this board has a different layout so i can not change the cooler's direction.
But i don't have any heat problems.
And for the dust. I allready ordered 2 mesh fan filters. because the dust bugs got me.lol

thats M2N32 right? i have that board but Dual-Chanell mem goes to either all black slots or yellow.
Yellow+Black gives single chanell

by: Mad_Man

---

thats M2N32 right? i have that board but Dual-Chanell mem goes to either all black slots or yellow.
Yellow+Black gives single chanell

---

Thanks m8. I figured that out after looking at CPU Z. LOL
One pic has the memory in single channel.

Men Your Pc Is Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Cool I Like All Inside Bt Do Something For The Psu Cables:)

by: technicks

---

Thanks m8. I figured that out after looking at CPU Z. LOL
One pic has the memory in single channel.

---

oh yes, now i noticed that it was in dual-chanell in one of the pics.
Btw, its very nice, sleek looking case. Simply love it. Would you mind posting some worklog about how you made the front intake?

by: Mad_Man

---

oh yes, now i noticed that it was in dual-chanell in one of the pics.
Btw, its very nice, sleek looking case. Simply love it. Would you mind posting some worklog about how you made the front intake?

---

Here you go. This i where i got the idea from.
http://www.mnpctech.com/120mm_FanDuct_Computer_Mod1.html

http://img.techpowerup.org/070514/Capture003.jpg

it looks good.... did you do it for any other reason other than looks?

wow... that is one nice mod. you sir, get a 10/10.


chros

Techniks this is a very stylish case. Clean, polished and the lighting is subtle compared to some more garish designs. The purple was a good choice, again like what you've done with the HSF. 9/10

by: d44ve

---

it looks good.... did you do it for any other reason other than looks?

---

I did it because i like to do something in my spare time. Gives me satisfaction that i made something with my hands.

by: technicks

---

I did it because i like to do something in my spare time. Gives me satisfaction that i made something with my hands.

---

I agree with you... I think it looks great. I was just curious

by: theonetruewill

---

Techniks this is a very stylish case. Clean, polished and the lighting is subtle compared to some more garish designs. The pruple was a good choice, again like what you've done with the HSF. 9/10

---

Thanks m8. I tried to keep it clean, so that it would look like the case was made that way.
I'm planning to do something with the sidepanel but don't know what accacly.

by: d44ve

---

I agree with you... I think it looks great. I was just curious

---

A year back i build this case. http://www.techpowerup.com/gallery/512.
Case is aluminum and mdf.
I still have it and in the summer vacation i'm gonna upgrade it.

thats a really cool patter on top of the cpu cooler and the side of the drive bays. is it a sticker or what? did it come like that? reminds me of carbon fiber

by: devinXkillyou

---

thats a really cool patter on top of the cpu cooler and the side of the drive bays. is it a sticker or what? did it come like that? reminds me of carbon fiber

---

Thanks. It's a carbon look sticker. Bought it on Ebay.

awesome job, especially for the antec 900, i have one and cant seam to keep it clean, although i do have a LOT of stuff jammed in it XD

Well Done very clean, and the routing makes me cry!

I lost my nibbler and need to buy a new one to even compete with this one!

by: frankenchrist

---

Well Done very clean, and the routing makes me cry!

I lost my nibbler and need to buy a new one to even compete with this one!

---

LOL. Thank's m8

not the fastest rig, but i certainly like purple. 9/10 :)

by: Mussels

---

not the fastest rig, but i certainly like purple. 9/10 :)

---

I got it running @ 3.ghz and ddr2 @1000mhz. Fast enough? lol

Thanks for voting.

dam you make the antec 900 look a million times better lol....i have one and i cant manage to keep the wires as neat as yours...as far as dust where did you order the mesh filters from??.....also what kind of paint did you use on the inside of the case??......sick modding 9/10

by: Da iLLeZt TL973

---

dam you make the antec 900 look a million times better lol....i have one and i cant manage to keep the wires as neat as yours...as far as dust where did you order the mesh filters from??.....also what kind of paint did you use on the inside of the case??......sick modding 9/10

---

I used Duplicolor paint. Very good an you can buy it almost everywhere. Remember to buy a primer from the same brand to.
For the mesh fan filters i bought them here: http://stores.ebay.com/Techgirls-Treasures.
Very cheap and excellent seller.

Jesus!! That thing is neat and very neat. beautiful case! very nice work 10/10

one of the sickest looking antec 900. ;) 9/10

http://www.leetlounge.com/gallery.html

I got invited to the Antec case gallery. Pretty cool.

by: technicks

---

http://www.leetlounge.com/gallery.html

I got invited to the Antec case gallery. Pretty cool.

---

My 900's not modded. Good to see yours there.

Just visited the PNY's 900 page. For once, I ever wanted a Antec 900 case, and almost bought 4x Antec Tri-cool Red Leds, in accordance to make my new PCI-E rig based on the Sapphire Pure ADV-RD580AM2 Mobo, and the X1950XTX in CF, along with a 6000+.. But that hope never came.. Cause I kept spending on my current rig. +_= But maybe.. Just maybe..

This is a really sweet job! I'm planning on the same concept on a Stacker STC-T01, there's going to be three 120mm fans on the front though, not one. I do have a question though, how did you fit the aluminum afterwards? do you have any pictures of that?

Hey that cooler master CD drive cover you have on there did it just screw into place? I am curious because i am wanting to do the same thing with that, but need to know before i do it all because I'm having my brother put a custom paint job on it all and will have to paint the drive cover also.

it's a wind tunnel!

technicks m8, your PC is a thing of beauty!!! It looks amazing!!!

not the wind tunnel i know that bud i am wondering if the coolermaster cd drive bazel cover just screwed into place or if he had to mod to get that on also?

Can you tell me more about the paint you chose? Duplicolor paint comes in all different styles and types and the finish you acheived is perfectly flawless!!

Thanks!
oh.. btw 10/10!

by: sampson2269

---

not the wind tunnel i know that bud i am wondering if the coolermaster cd drive bazel cover just screwed into place or if he had to mod to get that on also?

---

You can tape it on. 3M double sided tape.

by: HookeyStreet

---

technicks m8, your PC is a thing of beauty!!! It looks amazing!!!

---

Thanks Hookey. I tried to do good. And it came out nice.

KICK ASS RIG!!! 10/10
just plain beautifull

thx for youre comment on my rig ;)

I agree, awesome job!

I'm gonna attempt Mnpctech's Turbine Fan Case Mod

by: technicks

---

Thanks Hookey. I tried to do good. And it came out nice.

---

Your welcome m8! That is, without a doubt, one of the nicest PCs Ive ever seen! Is the rest of your room still funky/retro (coz that looked awesome too!)

PS: what speed is your Foxconn 8800GTS running at? Ive got a great overclocked BIOS for it here (via windows flash) if you want it (ive got them for the 320mb, 640mb & GTX Foxconn versions ;) )

by: HookeyStreet

---

Your welcome m8! That is, without a doubt, one of the nicest PCs Ive ever seen! Is the rest of your room still funky/retro (coz that looked awesome too!)

PS: what speed is your Foxconn 8800GTS running at? Ive got a great overclocked BIOS for it here (via windows flash) if you want it (ive got them for the 320mb, 640mb & GTX Foxconn versions ;) )

---

Thanks man. I appreciate that.
I got the Asus GTS 640 instead. They send me the wrong card. But i can't complain this card
rocks. Room is still the same basically.
Waiting for the prices to drop on the c2d's and score me a nice one.
How is your new setup. Do you like it?

First one I've seen that I've scored a 10! Very nicely done!!!

by: nora.e

---

First one I've seen that I've scored a 10! Very nicely done!!!

---

Thanks very much m8.

by: technicks

---

Thanks man. I appreciate that.
I got the Asus GTS 640 instead. They send me the wrong card. But i can't complain this card
rocks. Room is still the same basically.
Waiting for the prices to drop on the c2d's and score me a nice one.
How is your new setup. Do you like it?

---

Cool, I have the 'High Performance BIOS' for the ASUS 8800GTS 640mb aswell if you want it m8 (pm me your email address ;)

Got idea in waiting for the c2d's to come down in price again. YOuw ill be able to pick up a sweet Quad Core pretty cheap ;) Sadly, you will never go back to AMD then LOL :)

Im loving my new rig btw, its so fast! All I need is a tasty 8800 and I will be happy :)



EDIT: heres a link to the BIOS you need m8: http://putstuff.putfile.com/92190/5623958

Ive flashed at least 5 various models of 8800's with these performance BIOS' and they work great ;)

sweet build technicks. Makes my Antec 900 case look dull and boring now. 10/10

I want that case!

How did you fit that fan *into* the drive bays? Is it 120mm? Were there any big mods you had to make to fit it?

Did you use UV cold cathode lights to get the purple effect?

Killer mods, dude.

Damn that s*** is HAWT!!!

i like the update.. :)

by: fkyx

---

How did you fit that fan *into* the drive bays? Is it 120mm? Were there any big mods you had to make to fit it?

Did you use UV cold cathode lights to get the purple effect?

Killer mods, dude.

---

http://img.techpowerup.org/070514/Capture003.jpg. No purple. But UV.

lovely case i wonder what model is that psu....

by: Taso

---

lovely case i wonder what model is that psu....

---

That's a Hiper type R 580 w psu. Thanks for voting.

Awesome case, very clean.

10 for u too nice rig and cleanest i like the carbon and black beautiful combination,
great cable management.
bye ;)

I still think this is the nicest looking system on the TPU case gallery, without a doubt!

The more I look at it, the more I think WOW!

by: HookeyStreet

---

I still think this is the nicest looking system on the TPU case gallery, without a doubt!

The more I look at it, the more I think WOW!

---

You are to good for me. Thanks Hookey.

by: technicks

---

You are to good for me. Thanks Hookey.

---

Im just speaking the truth m8, youve done that awesome case proud m8 :) If my rigs looked half as nice I would be happy :)

PS: I do think you should keep your case when you go C2D ;) You could even get the Arctic Cooling Freezer 7 Pro and give it that carbon fibre look like your Arctic Cooling Freezer 64 Pro ;)

This is one 900 that i like.

you rig rocks man! It's Clean and i like the carbon modz and lastly i love the color combination from the background and in and out of your rig. ;)

by: inevitabler25

---

you rig rocks man! It's Clean and i like the carbon modz and lastly i love the color combination from the background and in and out of your rig. ;)

---

I agree, it is a beauty!

by: HookeyStreet

---

I agree, it is a beauty!

---

Hookey.

I got the FX62 from Damulta in my rig now.
Gonna try how high it will go. Pretty nice unlocked multi on this cpu.
I will sell it again and go for a Q6600 and a GigaByte P35-DS4 board. Will have it in a couple of weeks. Can't wait.

Awesome rig,

I love what you did to the front 10/10 from me

Thats way sickk. !!!.. 10/10, excellent work.
I love widescreen monitors, too.. I just recently got my samsung 24". :D
Really nice, though. Freakin' jet engine. lol

OHH.. hey, my TJ07 case will be here tomorrow.. anyone have that case?
I'm stokedXcore. :] :]

Looks amazing. The inside, the outside, the whole thing is awesome! Good job.

by: EnergyFX

---

10!!!

---

Thanks my friend.

Damm i just saw it. Great case mod!

Nice Rigg,the cooler i find most interesting never seen one like that before i would mod it if i where you take the FAN out a do a purple one in it. Also i would take your PC out of eighother and make the backpanel with a mirror that way you see more and the light reflects a lot better, mod it a little more and you will be a very happy man (i think you are already that)

Rate: 9/10

Rate my PC too

http://www.hardware.info/nl-NL/usersys/cmpxYp1gk2Sd/view/

I love the sytem, hands down a 10 and in the top 5 in this entire gallery. One thing that confuses me is the cpu cooler fans. From the testing I've done with that cooler, it generally works best when the fan is blowing towards the rear exhaust. Plus, the rear exhaust fan shouldn't have a dust filter on it?! I'll say it does look the best in your config, but why?

by: technicks

---

I got it running @ 3.ghz and ddr2 @1000mhz. Fast enough? lol

Thanks for voting.

---

what are your mem timings? If it is 4-4-4-12 or lower that is fast enough.

These are all old parts.

Update to a Q6600, MSI p35 Platinum,4 gb Crucial Ballistix 1000Mhz 4-4-3-10, Asus 8800GTS 512,
Thermalright Ultima 90.

Atm i can't update my pictures because something is wrong with it. I asked a mod about it but he could not fix it.
I have to send W1zzard a pm. I'm lazy.

by: Ati Addictive

---

Nice Rigg,the cooler i find most interesting never seen one like that before i would mod it if i where you take the FAN out a do a purple one in it. Also i would take your PC out of eighother and make the backpanel with a mirror that way you see more and the light reflects a lot better, mod it a little more and you will be a very happy man (i think you are already that)

Rate: 9/10

Rate my PC too

http://www.hardware.info/nl-NL/usersys/cmpxYp1gk2Sd/view/

---

Thanks for the vote.
Nice ideas. Should try them yourself.
Btw i hate mirrors. My rig is not a Christmas tree so it doesn't need the lighting.
The cooler is the Arctic Freezer 64 Pro. It just has a carbon look sticker on it.

When i looked at this post i came out angry. Not so.lol

Hey tech - Solid 10/10. Very sweet! Luv the intake! Hope ya don't mind I'm showing it off to some buds here at work! (Slow today here)

by: erocker

---

I love the sytem, hands down a 10 and in the top 5 in this entire gallery. One thing that confuses me is the cpu cooler fans. From the testing I've done with that cooler, it generally works best when the fan is blowing towards the rear exhaust. Plus, the rear exhaust fan shouldn't have a dust filter on it?! I'll say it does look the best in your config, but why?

---

Why? Could not fit the Arctic any other way on that mobo.
For the dustfilter. I put it on because it cleaning the air that is blowing at the back of my case. So i don't have to dust so often.

by: thoughtdisorder

---

Hey tech - Solid 10/10. Very sweet! Luv the intake! Hope ya don't mind I'm showing it off to some buds here at work! (Slow today here)

---

I wish i could upload some new pictures you will love them.
I will pm W1zzard about it. Keep your eyes open.
And thanks for the vote man. I am honored that you will show my case.

Wow. Just wow. The most amazing thing I have seen simply because, I just built this case and the cable management is an absolute mess. Maybe you can give me some tips? My PSU isn't modular - I have the 680W Hiper w/ the nine USB ports (lol). The extra cables really arent a problem for me because I have just tucked them under the bottom hard drive bay rather niceley. My problem is that my MOBO power, IDE power/cable, cpu cable, etc. are running between my mobo and drive bays... and rather poorly at that. I would appreciate any suggestions.. like how you got the inside to look black, and how you see almost NO cables.

11/10!

Best Nine Hundred modification I've ever seen! ;)

just posting again after posting early on in the piece - this truly is one of the best mods on TPU. some people go for bling, some add more cooling, some hack holes in a case.

This is one of the few mods that does it all. better cooling, better looks, and actual physical modification of hardware.

Thanks guys. I appreciate that.

Please look at my update and tell me what you think of it. http://www.techpowerup.com/gallery/1283.html

I tried to do a bit more cable management. And updated the hardware. Came out pretty nice.
2 Gb Crucial Tracers are coming in this week. Damn customs.

Any tips on how to successfully ropute the cables under the mobo? It seems like you would need to elevate the mobo some how - just looking for some help to clean up! Also, can you recommend any good filters? All the ones i have found are cheap and severely cripple my airflow.

by: y2nicco

---

Any tips on how to successfully ropute the cables under the mobo? It seems like you would need to elevate the mobo some how - just looking for some help to clean up! Also, can you recommend any good filters? All the ones i have found are cheap and severely cripple my airflow.

---

Just cut a hole in the case behind the mobo.

by: y2nicco

---

Any tips on how to successfully ropute the cables under the mobo? It seems like you would need to elevate the mobo some how - just looking for some help to clean up! Also, can you recommend any good filters? All the ones i have found are cheap and severely cripple my airflow.

---

set your system up with positive air pressure (more air in than out) and you'll find dust to be a lot less of a problem. ALL filters block airflow.

Streaght away i can see youve put alot of time and effort and thought into your case and even the smallest details are noticable i like what you did with the arctic freezer hs 10/10 from me bud great job nice rig.

Very nice... very clean, very tidy. 10/10!

i was wondering how you made that with the antec, i have seen how to make the duct and turbo fan but not sure how you did it with the 900. Did you cut through the metal mesh that covers the fan or did you make it some other way?

man that is nice

Wow, viewed over 20,000 times! This rig draws a lot of attention ;-)

Must be the purple!

by: EnergyFX

---

Wow, viewed over 20,000 times! This rig draws a lot of attention ;-)

Must be the purple!

---

Yeah i noticed that to. I am honored so many people look at it.

that was you old specs? its a nice look to look at technicks 10/10 from me to m8

I really do like your case man !

by: hooj

---

I really do like your case man !

---

Thanks man.

And yeah this was my old setup from a few years back.
My new one is the Lian Li.

by: SmoKie McPott

---

love it all, but turn that freezer pro 90 degrees to face the right way...it looks as if its pullin the hot air off the vid card

---

Actually it is blowing air down toward the vid card, which is creating some negative flow since the 200mm fan above it is sucking air up.

by: Viana.

---

I voted 4/10 because:

fair

---

Thanks for being a bitch. 0 post and you come and pis me off.

that is way tooooooooo fantastic.... nice moding. very clean and tidy... asus 8800GTS 640!! man I miss my old VGA so much... use to have that GTS on my first rig.. you deserve 10 points from me.. keep it up bro..:D

by: Viana.

---

I voted 4/10 because:

fair

---

yeah bitch.. Show us ur rig so we can smack a 10 out of it!!!!