Case Mod Gallery 
To add a case to the gallery, you have to be registered at the forums and logged in.
The free registration is located
here.
In this database you can submit your modded computer case creations to be viewed by the world. You may upload several pictures and people can post comments on your rig. A voting system is also in place.
My First Wate buildDuel Loop Cooling.
One loop, 2 radiators :DI whacked-up the sidepanel and transformed it into a bottom cover and panel to cover the 5.25inch bays.
I made a bracket to fit into the 5.25inch bays...
x3 8650 @ 3,1ghz
glacialtech igloo
biostar ta790gx 128+
Asus Lightscribe
WDC 640GB AAKS
Team Ellite 2GB kit Pc 800
Venom rx red diamond
Saphire 4830
Edifier E3350
Log...
This system was built with performance in mind. I had the NVIDIA GTX 295 initially, but then realized that you can get same or better performance with SLI or Crossfire for les...
Intel Core2 Duo CPU E8500
4503.84 MHz (474.09 * 9.5)
MB : Asus P5QC
GPU : GeForce 8800 GTX
RAM : 4096 MB DDR2 568.9 MHz
Manufacturer : Crucial
CPU: Intel Q9650 @ 3.9GHz
MOBO: XFX 780i
GPU: XFX GTX285 Black Edition
RAM: 2x2GB G.Skill PC8500 With TT RamOrb's And 2x2GB Patriot Vipers PC8500
PSU: Antec 850 Watt TrueP...
Custom Paint Job on both front and sides of case. Will be adding UV lighting and using UV reactive green spray on fans and cables.Antec 300
AM2 6000+
Ati Radeon 4850
4GB 8...
Bitspower (fittings, rotarys etc); Feser Blue Tubing; Swiftech MCR-220; Swiftech MCR-220 Stack; Swiftech MCW-60; DDC 3.2 + Petras Top; EK 150 Res; **Please give feedback if yo...
building my next RIG!
hopefelly will be finished before august..minor mods: front panel fan from top to bottom for better airflow to VGA area as additional airflow combining ...
The rig is mainly built for softcore gaming,added UV tube to improve the UV reative material to glow in the dark. The next casing of this rig (CM690) is modding now and soon w...
This is just an office rig for my brother to do his works,and sometime for entertainment.
The rig is located in Penang,Malaysia :)Cable management,active cooling for sound ca...
added a led strip to illuminate the innards more. upgraded my sound card as well.Rig Specs:
Asus Maximus Formula
Intel E8400
Corsair XMS2 DHX series 2x1gb 800Mhz
Inno3...
I'll add better pics and a proper description ASAP.Dual Lian Li V2000B
2x BI GTX 240 (VGA Loop)
1x BI GTX 360 (CPU Loop) Push n' Pull Config 6x Fan
1x BI GTX 120 (MB & HD L...
Fan Controller
Painted Case Red
Added Clear Window
Added 2 Red Cold Cathodes
Cable ManagementE8500 @ 4.0ghz (4.7ghz Bench) "E0" stepping
DFI LP LT X48-T3RS
Diablo 2000Mh...
Water Cooling setup: EK-Supreme - Acetal, 3x Scythe S-Flex SFF21E @ Magicool Xtreme III Radiator, XSPC Laing DDC Top @ Laing 12V DDC-1T, EK-Multioption RES 150 rev.2, 2x Nexus...
total build cost is under $300 ( includes 22 inch AOC TFT). e7200 @ 4 ghz with cooler master hyper tx HSU
powercolor 4830 @ 750/1055
2 gb of corsair ram @ 800 mhz
some old ...
Removed Top 5 1/4 Bay, Removed Hard Drive Cages and Shelving, Painted interior white
i7 920 @ 4GHz 1.35v
Asus Rampage II Gene
Swiftec Apogee GTZ
Swiftec QP220 Res w/Scyt...
judge my painting kindly, its only my third time using a airbrush.I have installed 2 UV black lights inside the case. I have installed a near silent fan/heat sink on my cpu ma...
just a first mod, so i will try to make it betterneonamd athlon x64 2x3.0ghz
3gb ddr2 gaming ram
250gb hardisk
Ati radion HD 3650 oc. 521mb ddr3
My case paint job is not perfect and will be redone eventually (after I sand everything down).Removed stock fans and replaced with new, more powerful ones. Currently there are...
-AMD Phenom II 720 BE @ 3.78Ghz 1.456v
-4GB DDR2 1066 Kingston Hyper X @ 5-5-5-16 2.1v
-DFI M2RSH 790FX/SB750
-Diamond 4870x2 @ 800/950
-Water Cooled
-Thermaltake P500 P...
Upgraded to Crossfire :), Added Scythe Mugen2 CPU Cooler, relocated OCZ XTC Memory cooler over VRM/NB, Added Scythe Ultra Kaze & Ultra 3.5" Fan controllers.AMD Phenom II 940BE...
New leaf green paint coated, the flame and the pictures made with black permanent marker, red white board marker and graphite then recoated with clear paint, Wrapped wires wit...
After the case was stripped down I used a 1/2 inch drill bit to drill about 15-20 holes in the bottom of the case for under the PSU so I can mount the PSU the way you see it f...
Replace stock cooler with Pentagram P7015, added ram heatsikn on my Radeon 4670 + OC Mem=950MHz, conected front panel to Audigy SE, hidding cables, change direction of airflow...
