Report an Error

NVIDIA Tesla C2075

NVIDIA Tesla C2075 Image NVIDIA GF110 Image
The Tesla C2075 was a professional graphics card by NVIDIA, launched in July 2011. Built on the 40 nm process, and based on the GF110 graphics processor, in its GF110-351-A1 variant, the card supports DirectX 11.0. The GF110 graphics processor is a large chip with a die area of 520 mm² and 3,000 million transistors. Unlike the fully unlocked GeForce GTX 580, which uses the same GPU but has all 512 shaders enabled, NVIDIA has disabled some shading units on the Tesla C2075 to reach the product's target shader count. It features 448 shading units, 56 texture mapping units and 48 ROPs. NVIDIA has placed 6,144 MB GDDR5 memory on the card, which are connected using a 384-bit memory interface. The GPU is operating at a frequency of 575 MHz, memory is running at 750 MHz.
We recommend the NVIDIA Tesla C2075 for gaming with highest details at resolutions up to, and including, 1680x1050.
Being a dual-slot card, its power draw is rated at 247 W maximum. Display outputs include: 1x DVI. Tesla C2075 is connected to the rest of the system using a PCIe 2.0 x16 interface. The card measures 267 mm in length, and features a dual-slot cooling solution.

Graphics Processor

GPU Name: GF110
GPU Variant: GF110-351-A1
Process Size: 40 nm
Transistors: 3,000 million
Die Size: 520 mm²

Graphics Card

Released: Jul 25th, 2011
Production Status: End-of-life
Bus Interface: PCIe 2.0 x16

Clock Speeds

GPU Clock: 575 MHz
Shader Clock: 1150 MHz
Memory Clock: 750 MHz
3000 MHz effective

Memory

Memory Size: 6144 MB
Memory Type: GDDR5
Memory Bus: 384 bit
Bandwidth: 144 GB/s

Render Config

Shading Units: 448
TMUs: 56
ROPs: 48
SM Count: 14
Pixel Rate: 16.1 GPixel/s
Texture Rate: 32.2 GTexel/s
Floating-point performance: 1,030 GFLOPS

Board Design

Slot Width: Dual-slot
Length: 10.5 inches
267 mm
TDP: 247 W
Outputs: 1x DVI

Graphics Features

DirectX: 11.0
OpenGL: 4.5
OpenCL: 1.1
Shader Model: 5.0

VGA BIOS

Find graphics card BIOS for this card.

GPU-Z Validation

Find GPU-Z validations for this card.

GF110 GPU Notes

Compute Capability: CUDA 2.0

Each Streaming Multiprocessor(SM) in the GPU architecture contains 32 SPs and 4 SFUs.

Each SP can fulfill up to two single precision operations FMA per clock.

Each SFU can fulfill up to four SF operations per clock.

The approximate ratio of operations FMA to operations SF is equal 4:1.

The theoretical shader performance in single-precision floating point operations(FMA)[FLOPSsp, GFLOPS] of the graphics card with shader count [n] and shader frequency [f, GHz], is estimated by the following: FLOPSsp f × n × 2.

Alternative formula: FLOPSsp f × m × (32 SPs × 2(FMA)). [m] - SM count.

Total Processing Power: FLOPSsp f × m × (32 SPs × 2(FMA) + 4 × 4 SFUs) or FLOPSsp f × n × 2.5.

Each SM in the GPU contains 4 texture filtering units for every texture address unit.

The complete die contains 64 texture address units and 256 texture filtering units.