News Posts matching "DFI"

Return to Keyword Browsing

DFI Announces LR100-N16M Fanless Mini-ITX ATOM N450 Motherboard

DFI has announced a new mini-ITX form factor motherboard in the LR100-N16M which offers low power consumption, higher-performance, and fanless cooling. This board utilizes the latest two-chip Intel Atom processor N450 and Intel 82801HM I/O Controller (also referred to as "ICH8M") system solution. This smaller integrated two-chip platform uses approximately 40% less board space than previous generation three-chip solutions, and provides higher performance per watt than any previous Intel Atom processor-based platform.

The LR100-N16M mini-ITX motherboard is equipped with a 45nm Hi-K technology Intel Atom processor N450 with 5.5W TDP, 667MHz front side bus (FSB) and 1.67GHz core frequency. In addition, this single core processor features a 512kb 8-way L2 cache, 64bit computing support using Intel 64 architecture, on-die memory and graphics controllers, all in a small Micro-GCBGA8 package. Integrating the memory and graphics controllers on the processor die increases performance, reduces the board footprint, and lowers power consumption over the previous generation three-chip platforms.

DFI Announces P45-ION-T2A2 Hybrid Motherboard Availability

Due to the serious issue of global warming, in order to reduce carbon dioxide emissions, saving energy has become the responsibility of every global citizen. DFI is committed to developing energy saving products, not only to provide consumers a better platform, but also to do the best for the earth. Therefore, Hybrid platform was invented. Besides saving plenty of energy, Hybrid platform also brings consumers the benefits of time saving, space saving, and money saving. In addition, it is simple to use. Via a control panel, two systems can be easily switched and using condition can be known.

Hybrid platform, adopts the latest DFI patent technology. That is, a board combines a powerful platform of the current mainstream (P45 + ICH10R) and a green platform (NVIDIA ION). In other words, Hybrid has two platforms which operate completely independently. What is more, files can be shared between platforms. Through integrated hardware switch chips as well as network switch chips, Hybrid platform features a KVM and LAN switch on board. So Hybrid platform can be used with a monitor and keyboard/mouse, or with two sets of devices to work separately. This product will bring you the following four benefits.

DFI Lanparty BI P43-T34 Motherboard Unveiled

DFI LANParty today introduces its new motherboard, the Blood Iron BI P43-T34, after the launch of the high-end P55 motherboard. BI P43-T34 makes LANParty Blood Iron series a more complete product line. For those who like LANParty products, it is the best value motherboard.

To provide consumers with better value platform, BI P43-T34 is equipped with exclusive LANParty ABS II, CPU auto upgrade technology. CPU performance can be automatically promoted!! As long as users choose ABS II started while boosting system at the first time, the system's performance can be upgraded immediately. Therefore, users do not have to spend a lot of time and effort to set up for better performance. That is, even with limited budget, consumers still can obtain higher performance easily and fast.

DFI Releases Intel Atom Based Fanless Embedded System – ES951

DFI releases the new ES951 fanless embedded system equipped with the 3.5” subcompact NP951-B16C SBC. Featuring an Intel Atom N270 Processor and Intel 945GSE / ICH7M chipset with low power consumption, the ES951 is ideal for embedded computing applications requiring a compact passively-cooled platform.

The NP951-B16C SBC features up to 2GB of system memory using one 200-pin DDR2 400/533MHz SO-DIMM, VGA display port, and 24-bit HD audio with S/PDIF I/O support. The compact embedded system is constructed of electro-galvanized cold-rolled steel and aluminum, with provision for use in wall mount or desktop applications. It is supplied with a universal 60-watt power adaptor for use with 100-240 VAC at 50-60Hz line input.

DFI Mashes Two Systems into One, Rolls out Hybrid Motherboard

The term 'Hybrid' these days probably relates most to hybrid cars. DFI has taken the concept of two machines - a high-power one, and an energy-efficient one, to a whole new level with its Hybrid P45-ION-T2A2 socket LGA 775 motherboard. This motherboard literally packs two motherboards sharing a PCB: one P45+ICH10R based socket LGA-775 system, and another portion holding an Intel Atom processor powered by NVIDIA ION chipset. Each has its own memory and storage subsystems, and share the machine's IO (input devices and display) in a somewhat KVM-style. So even as the major system is busy playing games, transcoding media, or running other power-hungry tasks, the minor system is quietly running the downloads, playing music, etc. When the major system is not needed, the minor system provides enough juice for media consumption and internet browsing, and general productivity at a really low energy footprint. A pretty neat concept. DFI's engineers describe it further in this YouTube video.

Source: TweakTown

DFI Announces LANParty BI 785G-M35

Possessing industrial grade technology, DFI LANParty is going to launch the newest Blood Iron series product, 785G-M35 Micro ATX motherboard. Accommodating AMD 785 chipset, BI 785G-M35 incorporates integrated ATI Radeon HD 4200, which supports DirectX10.1, Shader Model 4.1, and UVD 2.0. With 128MB DDR3 Sideport Memory, graphics performance of BI 785G-M35 can be improved up to 10%~15%. What is more, it comes with LANParty exclusive “ABS II” CPU Auto Upgrade technology and leading-edge digital PWM so as to let users enjoy the ultimate high performance and simultaneously save a huge amount of budget and electric pay.

CPU can be upgraded. Users do not need to spend a huge amount of money on high degree CPU, but still can obtain the same high performance. “ABS II” CPU Auto Upgrade Technology exempts users from complicated set-up steps. As long as users choose upgrade option at the first boost time, ABS II then will detect CPU and upgrade it automatically. As a result, performance is improved easily and money is saved accordingly.

DFI Announces LANParty DK P55-T3eH9

Equipped with Industrial grade technology, DFI LANParty motherboard is always the best choice of enthusiasts in terms of performance and quality. This time, DK P55-T3eH9 does not only deliver brilliant performance, but also includes several exclusive and advanced technologies to satisfy user’s needs. Accommodating Intel newest single chipset, P55, DK P55-T3eH9 comes with processor socket of LGA 1156. It also supports dual channel DDR3-1333 express memory. As for its unique features, DK P55-T3eH9 is provided with exclusive “ABS II” CPU auto upgrade technology, pioneering digital PWM of high power efficiency , as well as superior extreme cooler design. What is more, DK P55-T3eH9 adopts Creative X-Fi extreme fidelity technology and BIOSecure technology, providing marvelous audio and 100 % recovery of BIOS crash.

Using exclusive “ABS II” CPU auto upgrade technology, DK P55-T3eH9 can save around 35% budget for high degree CPU, when still rendering the same high performance. Without complicated set-up steps, CPU performance can be improved automatically as system is turned on. In addition, with the pioneering digital PWM, the power efficiency of DK P55-T3eH9 is much higher than traditional one’s. By virtue of this, energy can be saved all the time. Besides, more stable power can be provided and then component lifespan can be extended.

DFI LANParty DK P55-T3eH9 Detailed

DFI's retail-grade pack of motherboards for socket LGA-1156 platform will be lead by the LANParty Dark P55-T3eH9. Dressed in black and orange, the P55-T3eH9 sports a fairly standard feature-set for the Intel P55 chipset. The CPU socket is powered by a 6+2 phase VRM, and is wired to four DDR3 DIMM slots for dual-channel memory. Expansion slots include three PCI-Express x16, depending on what's under the heatsink south of the CPU socket, the orange slots could be (dual x16 or x8). The black slot looks like PCI-E x4, wired to the PCH. Two PCI-E x1 and PCI slots make for the rest of the expansion.

Apart from all the features the P55 PCH provides, including six SATA II ports, an additional controllers add two SATA II, an eSATA and one IDE connector for two devices. Connectivity is care of one gigabit Ethernet controller, and a number of USB ports, including one mini-USB. A high-grade HD audio codec also provides digital audio connectivity through optical and coaxial SPDIF connectors. The LANParty Dark P55-T3eH9 is expected to be priced at 175€.

Source: GinjFo

DFI Intros Blood Iron G41-T33 Motherboard

DFI made a new addition to its popular LAN Party Blood Iron lineup, which offers overclocker-friendly features on a budget. The Blood Iron G41-T33 is the first micro-ATX model in the series, and uses the Intel G41 + ICH10 chipset. The board remains minimalistic, taking care of only the essentials as far as components go. The LGA-775 socket is powered by a 3-phase circuit. There are two DDR2 DIMM slots, with support for dual-channel DDR2-1066 memory. The G41 northbridge packs an Intel GMA X4500 IGP. Expansion is care of one PCI-E x16, a PCI-E x1, and two PCI slots. The southbridge provides four SATA II ports internally. 6-channel audio and gigabit Ethernet make for the rest of this product. The LAN Party G41-T33 is expected to retail for around US $90.

Source: TechConnect Magazine

DFI Launches NP100-N16C Intel Atom-equipped Mini-ITX Motherboard

DFI on Wednesday launches new fanless Mini-ITX motherboard - NP100-N16C. This motherboard utilizes the 45 nm 1.6 GHz Intel Atom N270 processor (533 MHz FSB) with Intel 945GSE Express chipset and ICH7M I/O controller hub. An integrated Intel GMA 950 graphics is present, as well as a 240-pin DDR2 DIMM slot supporting up to 2 GB of DDR2 400 or 533 MHz memory. The integrated video has analog VGA and digital DVI outputs. In addition, the NP100-N16C has one CompactFlash socket, 2x SATA ports, 8x USB 2.0 ports, 4x Serial COM ports, 2x PCI Express Gigabit LAN controllers, 1x PCI Express x1 slot, and a PCI slot. A Realtek ALC262 2-channel HDA CODEC with S/PDIF I/O reproduces the audio. You can expect the board next month.

DFI Announces Blood Iron P45-T2(R)S Elite Series, The Most Affordable OC Motherboard

From now on, amazing performance becomes available on affordable motherboards. In addition to the development of high-end overclocking motherboards that set world record in performance, the LANParty team has recently committed to a research program called “top performance at affordable prices”, allowing more consumers to enjoy low-price yet high-performance motherboards.

The BI P45-T2(R)S Elite family is the first wave of the “top performance at affordable prices” series. High-end hardware layouts, excellent BIOS design, and ex-factory overclocking stress test are totally migrated to the product. With the price under USD $110, it can surprisingly challenge $150-level products in terms of performance.

DFI Announces LANParty DK 790X-M2RS

DFI LANParty AMD series motherboards, including the highest end 790FXB family and multi-media 790GX family, have proved excellent performance on Phenom II overclocking. Now, LANParty team is focusing on “Main stream Overclocking”, DK 790X-M2RS is the first product that aims this segment.

Compared with the high-end 790FXB family, the DK 790X-M2RS has the equivalent overclocking BIOS settings and also retains exclusive overclocking features such as “debug LED”, “built-in power/reset button”, and “six fan connectors”. Therefore, the DK 790X-M2RS is really a cost-effective overclocking motherboard.

DFI LANParty Announces Project Europa World Overclocking Contest

DFI LANParty, one the most famous mainboard brands worldwide, will hold the first session of global online overclocking competition during April to May of 2009. In addition to a handsome sum of money as prize and awards to the top three, the top ten candidates will also be honored as “LANParty certified overclocker”.

“LANParty certified overclocker” enjoys the priority to obtain information on the new products, directly talk with R&D engineers and provide suggestions for the products under development. For more information, please visit this page. For registration or inquiries mail to wr@dfi.com.tw.

DFI LANPARTY UT P55 Motherboard Pictured

Surprisingly, VR-Zone today posted pictures of the LANPARTY UT P55 board, a twin of the recently spotted DFI LANParty Dark P55 T3eH6, that packs several interesting features. Quick introduction, the board uses Intel's P55 chipset for the upcoming LGA-1156 socket processors. The board has a total of four DDR3 DIMM slots, three PCI-E x16 slots, digital power circuit and DFI's usual color theme. Also note, that there's a slot on the motherboard for NAND flash installation. Additionally, a mini USB port is located on the I/O backpanel. For now the presence of this NAND flash slot remains mystery. DFI will showcase the motherboard at Computex Taipei 2009 where we hope they will say what is it for.


Source: VR-Zone

DFI Preparing Budget P45 Board

It appears DFI is preparing an update to its current Intel P45 based P45-T2RS board, called the Blood Iron P45-T2RS Elite. Although an update, the new board with its revised PCB layout and new LAN chip, drops from two PCI-E x16 slots to one, in favour of a third PCI-E x1 slot. Despite being a budget board, it has been said that speeds in excess of 600 FSB are easily attainable. Like most other P45 based boards, the Blood Iron P45-T2RS Elite will support LGA775 Processors ranging from 800 to 1333 FSB, 4 DDR2 slots for up to 8 GB of 1066 MHz, 6 SATAII ports, 12 USB 2.0 ports, legacy support for IDE and floppy, 8CH HD audio via a Realtek ALC885 chip, 1 Gigabit LAN port via a JMC250 chip, a Software Debug LED and on board power and reset switches.
BIOS voltage tweaks include, Vdimm, Vnb, Vcore, Vsb, VHT, and then the usual adjustments for FSB in 1 MHz increments and CPU multiplier. It is also said that DFI have fixed the issue of automatic shutdown while overclocking and that mass production will start next week.

DFI Prepares LANParty JR 790GX-M3H5 AM3 mATX Motherboard

Famed for its LANParty JR "junior" series high-end mATX motherboard lineup, DFI is preparing an addition: the JR 790GX-M3H5. This one features the AM3 socket, made for the latest AMD processors supporting DDR3 memory. Respecting the constraints this form-factor has, the board goes on to cover every feature one would expect from a larger ATX motherboard, which is the ideology behind the LANParty JR.

The CPU is powered by a 4+1 phase VRM circuit. Expansion includes two PCI-Express 2.0 x16 slots (electrically x8 when both are populated), a PCI-E x1, and a PCI slot. The 790GX IGP is assisted by 128 MB of DDR3 sideport memory. Display outputs include DVI-D and HDMI. The SB750 southbridge provides six SATA II ports with RAID support. This board will hit the shelves by the end of April.

Source: VR-Zone

Prolimatech Prepares a Fleet of Monster CPU Coolers

Prolimatech packs the large CPU cooler design ideology with DFI's LANParty branding from DFI. The company started off with the Megahalems cooler that received good reviews. PC Games Hardware sourced pictures and drawings of some really fascinating, yet large CPU coolers in the works by the company, from German retailer Caseking.de, before officially listing the products. To succeed the Megahalems, the company has three new coolers named Genesis, Jericho, and The Mammoth.

Some of the most audacious designs ever imagined, have taken shape, and may be ready to hit the market. The drawings show Jericho to be a medium-to-large cooler with stacked aluminum-fin blocks, and a fan that circulates air. The Mammoth and Genesis have a peculiar staged heat-column design. For The Mammoth, the CPU contact-block gives out numerous heatpipes that convey heat to two staged aluminum fin arrays with dedicated air-flows, both of which are along the plane of the motherboard. The Genesis, on the other hand uses a slightly different design, with an array perpendicular to the plane of the motherboard. There is no word on exactly when these coolers get listed.

Source: PCGH

DFI Launches LANParty DK 790FXB-M3H5 AM3 Motherboard

DFI finally added an AM3 motherboard based on the AMD 790FX chipset to its lineup. The LANParty Dark 790FXB-M3H5 makes it to the tier of motherboards that are based on the AMD 790FX + SB750 chipset, and support DDR3 memory. Looks and feature-wise, this board is near-identical to the LP DK 790FXB-M2RSH, except for the fact that it features the AM3 socket, supports the latest AMD AM3 CPUs out of the box, and supports DDR3 memory. DFI advertises this board to be "the best OC platform".

The board features a 4+1 phase CPU power circuit. It features two full-length electrically 16-lane PCI-Express 2.0 slots to support ATI CrossFireX. The third full-length slot is electrically x4. The board supports DDR3 800/1066/1333 MHz memory, and DDR3-1600 by overclocking. DFI uses the Marvell 8056 gigabit Ethernet controller, which is advertised to be 15% faster than competing models. Audio is care of Realtek ALC885 HD audio. LANParty ABS II on the fly overclocking feature, backed by DFI's iconic Genie BIOS, make for the rest of the feature-set.

Source: DFI

DFI LANParty Dark P55 T3eH6 Pictured

DFI seems to be almost ready with a motherboard based on Intel's P55 chipset, that supports the company's upcoming LGA-1156 socket processors. This motherboard did not get the limelight at this year's CeBIT event. It doesn't seem like DFI finalized the board's cooling, hence the pictures don't show coolers over the chipset and VRM areas. The rest of the board's features are pretty visuals:
  • 6+2 phase CPU power circuit,
  • Four DDR3 DIMM slots for dual-channel DDR3 memory
  • P55 chipset used without any additional PCI-Express bridge chip
  • Three PCI-E x16 slots, most likely two of them are routed to the CPU, arrange as x8, x8 with both populated, while the third is routed to the P55 chipset's 8-lane PCI-E hub
  • Six SATA II ports from the PCH, two from an onboard controller, the same controller also provides an IDE connector
The rest of its features seem pretty standard for motherboards of its class. DFI may introduce this motherboard in some of the first waves of product launches following Intel's launch of compatible processors.

CeBIT 2009: DFI


DFI is showing off all of their mATX boards aimed at the gaming enthusiast. These come in all kinds of flavors, sporting all available CPU sockets and also offering multi GPU possibilities. Their newest addition is the X58 based one, which has all the features of an ATX board but gives the user the possibility to pack everything into an mATX chassis.

Further Details of DFI CPU Cooler Turn Up - Prolimatech Megahalems

Some of you may have read the news post about the DFI CPU cooler, spotted on one of their boards. Not a lot of information has been made available, but we got the specifications right here for you. The cooler is made by Prolimatech, a firm established in 2008. This means that the cooler is not from Thermalright, as previously believed. It could also be possible, that the image of the DFI board with the cooler used means nothing and that DFI will not be entering the CPU cooler business after all. The "Megahalems" cooler comes with the following features:
  • Minimal air resistance between fins allowing best balance between noise and performance in range of 800-1200RPM
  • Heatpipes are lined up in a straight line to prevent air back draft allowing air to easily pass through the heatsink body
  • Wide fins with mathematically calculated thickness to maximize best air-to-surface cooling rate
  • Uniquely designed, easy-to-install socket 775 and 1366 retention mechanism to increase cooling ability.
  • Easy to apply, high grade thermal compound, a perfect sidekick to all Prolimatech heatsinks

The unit is already listed at various shops for just under 60€ and should be available at the beginnging of March. Read on for the coolers full specifications.

DFI LanParty CPU Cooler in the Works

Clunk.org.uk have got hold of some photos of what appears to be a DFI LanParty branded CPU Cooler. The design is something new, featuring 6 heatpipes, effectively acting as 12 and with two independant heatsinks. No details such as pricing or availability accompany the images, but it is believed DFI are in collaboration with Thermalright and as such this could be a joint venture between them. The cooler seems to be held on with a prototype bolt on kit, which one would expect to change before the product reaches retail.

Source: Clunk.org.uk

Phenom II X4 at 6.30 GHz, Runs 3DMark-Stable

AMD finally seems to have put a realistic assessment of its processors, with its claims of the Phenom II X4 having "massive headroom" with its overclocking potential being validated once again, this time by Team Finland, at a CES overclocking event. Team Finland was able to overclock a Phenom II X4 940 processor at its highest stable clock speed of 6.30 GHz using extreme cooling. Earlier attempts to overclock the chip beyond the 6 GHz mark only yielded in test-beds that were able to POST, boot and display the clock speed using CPU-Z. This attempt however, was a benchmark-stable overclocking feat.

The bench consisted of a Phenom II X4 engineering sample, DFI LANParty Dark 790FXB-M2RS, OCZ DDR2-1066 memory, two Radeon HD 4870 X2 graphics cards in CrossfireX and Windows XP. The CPU cooling employed was liquid helium, which dropped the temperature to -242 degrees Celsius. To achieve a clock speed of 6.30 GHz, the processor's vCore was set at 1.84V, its bus speed at 280 MHz and a multiplier of 22.5 was set. The HyperTransport frequency multiplier was set at 8. The Radeon HD 4870 X2 accelerators were set at 800 MHz (core) and 950 MHz (memory). The machine was put through 3DMark05, where it ended with a world-record score of 45,474.


Source: Plaza.fl

DFI Releases Two New Core i7 Motherboards

DFI made additions to its Core i7 compatible motherboard lineup today by releasing two new motherboards under the LANParty Dark and LANParty Junior series. While pictures and specifications of the LANParty JR X58-T3H6 surfaced earlier, its introduction makes it a one of its kind mATX motherboard supporting the Core i7 platform. DFI started its Core i7 motherboard series with the enthusiast-grade LANPARTY UT X58-T3eH8. Its newest entry that comes to surface is its LANParty Dark motherboard: the LANParty DK X58-T3eH6.

The LANParty DK X58-T3eH6 uses essentially the same PCB layout as the LANPARTY UT X58-T3eH8, except for a few changes: the CPU power ciruit and the component cooling. While the UT board comes with digital-PWM, the DK board comes with standard choke-based 6-phase CPU power circuit. It uses chipset and VRM coolers identical to those of the LANParty JR board, comprising of a simplistic northbridge cooler that propagates into the VRM cooler, while a heatsink cools the southbridge. It provides three PCI-Express x16 slots (electrically x16, x8, x8 or x16, NC, x16). These two motherboards are expected to reach retailers soon.

Source: TechConnect Magazine

DFI Ready with X58 LANParty Jr

DFI is ready with the first LGA 1366 motherboard in the micro-ATX form factor, the DFI LP JR X58-T3H6, dubbed LANParty Junior, which supports the latest Core i7 processors by Intel. The motherboard measures 245 x 245mm. Despite its smaller size, it has a respectable feature-set: 6-phase CPU power circuit, six DDR3 DIMM slots for triple-channel memory, two PCI-Express 2.0 x16 slots supporting both ATI CrossFire and NVIDIA SLI, an additional PCI-Express x4 slot, and HDCP capable ALC 889A HD audio.

The BIOS features CMOS Reloaded, Voltage Tuning for vDIMM, vNB, vCore, vSB, vHT, frequency tuning in increments of 1 MHz, adjustable CPU multiplier, and ABS technology system. The board features as many as 7 fan headers, onboard power and reset switches, and diagnostic LED display. There is no word on the pricing or availability at this point in time.

Source: VR-Zone
Return to Keyword Browsing