ID-Cooling today unveiled the IS-30 line of low-profile CPU coolers. With their fans installed, these coolers have a height of just 30 mm. There isn't enough room for a multi-socket retention module, and so there are socket-specific variants. The IS-30I Black is designed for Socket LGA1700 and LGA1200/115x, while the IS-30AMD is designed for Sockets AM5 and AM4. A key difference in design between the two is what while the IS-30I Black has all-black fins and heatpipes, while IS-30AMD uses bare aluminium fins, and nickel-plated copper heatpipes.

The design for the IS-30 series is pretty straightforward—four 6 mm-thick copper heatpipes make indirect contact with the processor through a copper base, conveying heat through a thin aluminium fin-stack, which is ventilated by a thin 92 mm fan. This fan features a sleeved bearing, turns at speeds between 800 to 3,600 RPM, pushing up to 40 CFM of airflow, with noise levels ranging between 17 to 35.8 dBA. With the fan in place, the cooler measures 94 mm x 94 mm x 30 mm (not including the retention module, so it's 30 mm up from the point of contact with the processor. ID-Cooling claims that the cooler can take thermal loads of up to 100 W. The company didn't reveal pricing.

ID-COOLING is ready to release a full series of All-in-one liquid coolers with 2.1" LCD Display, available in both black and white, 240 mm and 360 mm, named SL series (short of SPACE LCD). Featuring a new PWM pump core pushing the RPM from 0 to 2500, the SL series can provide better water flow than previous generations and keep a quieter operation when needed.

Moreover the cooling performance is guaranteed by the newly developed 120 mm x 120 mm x 27 mm PWM fan, running from 500 to 2000RPM, 78CFM, 2.68 mm H₂O, 29.9 dB (A). Fluid dynamic bearing is used to ensure quiet operation and durability. Tubing clips are included for tidy looks. Tubing lengths are 400 mm for 240 mm version, 465 mm for 360 mm version.

ID-Cooling introduced the IS-67-XT, a low-profile CPU cooler, which gets its name from its Z-height of just 67 mm, with its fan in place. The cooler comes in all-black, and all-white variants. Its design involves a C-type aluminium fin-stack heatsink, with a top-flow ventilation. Six 6 mm-thick nickel-plated copper heatpipes draw heat from a copper base, which is then conveyed to an aluminium fin-stack that's arranged along the plane of the motherboard. This is ventilated by a 15 mm-thick 120 mm fan. ID-Cooling claims a cooling capacity of 150 W, which means you should be able to run most mainstream desktop processors at stock speeds, taking advantage of the lower noise figures than stock cooling solutions.

The included 120 mm fan takes in 4-pin PWM input, turns at speeds ranging between 500 to 2,200 RPM, pushing up to 67.58 CFM of airflow at 1.54 mm H₂O static pressure, and a maximum noise output of 35.2 dBA. The cooler measures 120 mm x 120 mm x 67 mm, weighing 500 g (including fan). Among the CPU socket types supported by the ID-Cooling IS-67-XT are LGA1700, AM5, LGA1200, AM4, and LGA115x. Backed by a 3-year warranty, both color variants of the cooler are priced at USD $44.99 a piece.

ID-Cooling today introduced the PinkFlow Diamond Edition, an all-in-one liquid CPU cooler that has a pink+white aesthetic. The star attraction here is the RGB-illuminated ornament on top of the pump-block, which shimmers like a diamond with the LEDs underneath. White Nylon-sleeved tubing connects this to a 240 mm x 120 mm radiator that's completely white, including the fins.

Each of the two included 120 mm fans features a white frame with pink impeller, with addressable RGB LED diffusers along the bore of the frame. The fans turn at speeds ranging between 900 to 2,000 RPM, pushing up to 55.2 CFM of airflow, with up to 2.13 mm H₂O static pressure. Among the CPU socket types supported include AM4, LGA1200, LGA115x, and LGA2066. The company didn't reveal pricing.

ID-Cooling today unveiled the Ice Flow ARGB Snow line of all-in-one liquid closed-loop CPU coolers. These are essentially a whitewash of the original Ice Flow ARGB series the company unveiled in July 2020. With silvery white taking over the cooler's CPU block, its Nylon tubing sleeves, the radiator (including its aluminium fins), the compound fan's frame, and the impeller. The impeller is still studded with addressable RGB LEDs at the hub. A unique feature with the Ice Flow ARGB series is the location of the pump+reservoir, which is at the radiator, rather than integrated with the CPU water block. The Ice Flow ARGB flow debuts with a 240 mm x 120 mm variant that has a dual impeller compound fan. The cooler has the same specs and cooling capacity (of 250 W) as the original. The company didn't reveal pricing.

ID-COOLING today announced IS-60 EVO ARGB low profile CPU air cooler, featuring only 64 mm total height, 6 copper heatpipes, copper base and one 120x120x15mm PWM ARGB fan plus a 92 mm x 92 mm x15 mm PWM fan. IS-60 EVO ARGB is specially designed for high performance small form factor builds with a TDP up to 130 W. It is compatible with the mainstream CPU sockets on ITX systems, including Intel LGA1200/1150/1151/1155/1156 and AMD AM4.

The thermal solution is achieved by utilizing a few key structural designs: pure copper base and pure copper heatpipes, high quality aluminium fins which soldered to the heatpipes. Similarly to IS-47K, this new cooler is carefully designed so the layout enables a 100% RAM compatibility on almost all ITX motherboards when the motherboard doesn't have high M.2 heatsink between CPU and PCI-E, for those motherboards who do have high M.2 heatsink module, this cooler can be mounted in an upward direction, which will have around 40 mm tolerance for memory.

ID-COOLING today announced SE-914-XT Series CPU air cooler, featuring a comparatively big heatsink in the section of 130 mm height. Both coolers have 4 direct-touch copper heatpipes, 92 mm PWM fan and newly designed metal-mecha mounting system which is proved user friendly on the previous SE-224-XT series. Model names are: SE-914-XT ARGB & SE-914-XT BASIC.

With a quite thick heatsink design, these two coolers are designed for a TDP max at 150 W. In a height of 131 mm for the ARGB version / 126 mm for the Basic version, they can fit very well into medium size cases. ARGB version has a black heatsink and a top ARGB cover while BASIC version has only a top black sticker for a stealthy look.

ID-COOLING, a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced ICEFLOW 240 ARGB AIO water cooler, featuring a brand new pump on radiator design and newly developed ICEFAN 240 mm. ICEFLOW 240 is equipped with a brand new pump which is built into the side of the radiator. With flow rate reaching up to 240 l/h, lift range 1.8 m H2O, the coolant circulates quickly to help moving the heat from CPU to radiator. Power connector is 3-pin with a 3-pin to Molex adapter to help ensure 12 V constant input to ensure maximum cooling performance.

The newly developed ICEFAN 240 fan features two fan blades in one frame. Two fan blades shares one PWM input and one ARGB input cables. Fan speed is PWM controlled from 900 to 2000RPM, pushing max. airflow of 56.5CFM each. Rubber dampeners on fan frame are provided to absorb vibration to lower operation noise.

ID-COOLING today announced IS-47K low profile CPU air cooler, featuring only 47 mm total height, 6 copper heatpipes, copper base and a 92x92x15mm PWM fan. IS-47K is specially designed for high performance small form factor builds with a TDP up to 130 W. It is compatible with the mainstream CPU sockets on ITX systems, including Intel LGA1200/1150/1151/1155/1156 and AMD AM4.

The thermal solution is achieved by utilizing a few key structural designs: pure copper base and pure copper heatpipes, high quality aluminium fins which soldered to the heatpipes, PWM 92x922x15mm fans and on top of that, a tube of high cooling performance thermal grease ID-TG25 which has a 10.5 W/m-K thermal conductivity.

ID-Cooling unveiled four new color options for its ZF-12025 120 mm case fan with white lighting. The four new pastel color options are "Baby Blue," "Lemon Yellow," "Mint Green," and "Piglet Pink." The color scheme extends to the fan's frame and the impeller, while the vibration-dampening rubber inserts and the a ring along the bore of the frame remain in contrasting white, with a single-color white LED inside that draws power from the main 4-pin connector.

Recommended for both case ventilation and liquid-cooling applications, the ZF-12025 takes in 4-pin PWM for its main function. It spins between 900 to 2,000 RPM, pushing up to 55.2 CFM of air, with 2.13 mm H₂O pressure. ID-Cooling will reportedly introduce several of its products, including radiators, AIO CLCs, and heatsinks in these four new color schemes, matching the the ZF-12025. The fans are expected to be priced at USD $12.99 a piece, with U.S. availability expected around late-June.Update May 21st: ID-Cooling clarified to us that the pastel color variants of the ZF-12025 lack ARGB lighting, and in place of the ARGB diffuser is a solid white color ring with a white LED. The company also revealed pricing and availability information.

ID-Cooling today updated its Zoomflow line of all-in-one liquid CPU cooler series with the new Zoomflow 360X Snow. As with most PC hardware names that use the term "snow," the 360X Snow is a white trim of the Zoomflow 360. White dominates the pump-block's body, the nylon sleeve around the tubing, the radiator (including its fins), and the three included fans. ID-Cooling claims the cooler is capable of handling thermal loads of up to 350 W thanks to its high coolant pressure and large 360 mm x 120 mm radiator.

The three included 120 mm hydraulic-bearing fans each spin at speeds ranging between 700 to 1,500 RPM, pushing up to 62 CFM of air, with noise output ranging between 18 to 26.4 dBA. A single 3-pin ARGB connection from the motherboard lights up the three fans and the RGB ornament on the pump-block. Among the CPU socket types supported are AMD TR4, sTRX4, and AM4; and Intel LGA2066 and LGA115x. The company didn't reveal pricing, although we expect it to be priced around the $130-mark.

ID-COOLING today announced SE-234-ARGB CPU air cooler, featuring Addressable RGB Lighting on both the heatsink top cover and fan, 4 direct-touch copper heatpipes, 120 mm PWM fan and newly designed metal-mecha mounting system. This cooler is designed to cool those processors with a TDP under 200 W. With a dimension of 126x88x154mm, this cooler is basically compatible with all regular ATX cases. The whole heatsink body has a black coating for stealthy looking.

Both the top cover and fan has addressable RGB lighting. Their ARGB cables are connected into one header, which can then be connected to motherboard 5 V 3-pin ARGB header from ASUS Aura, MSI Mystic Lighting, Gigabyte RGB Fusion and AsRock Polychrome Sync. For non ARGB motherboard users, there's an internal cable controller for multiple RGB lighting effect.

ID-COOLING today announced SE-224-XT Basic CPU air cooler, featuring 4 direct-touch copper heatpipe, 120 mm PWM fan and newly designed mounting mechanism. This cooler is designed to cool those processors with a TDP under 180 W. With a dimension of 120x73x154mm, this cooler is basically compatible with all regular ATX cases.

The included standard 120x120x25mm fan has 8 pcs rubber dampeners on all corners of both sides, running at 700 to 1800rpm with PWM support while pushing 76.16CFM air at maximum speed, noise level measured 15.2 to 32.5 dB(A). An extra fan clip set is included for a push-pull configuration. The bundled thermal grease is named ID-TG25, which has a thermal conductivity of 10.5 W/m-K.

ID-Cooling rolled out the IS-50X, a low-profile CPU cooler capable of handling thermal loads of up to 130 Watts, with a height of just 75 mm. The cooler features a "C-type" heatsink design. Five 6 mm-thick nickel-plated copper heat pipes make direct contact with the CPU at the base, and guide heat through an aluminium fin-stack that's arranged along the plane of the motherboard. The fins are slightly broader towards the portion of the stack that's directly above the CPU socket, and thinner along the periphery, to offer clearance to your motherboard's memory and CPU VRM areas.

A 15 mm-thick 120 mm PWM fan ventilates the fin-stack. This fan spins between 600 to 1,600 RPM, pushing up to 53.6 CFM of air, at a noise output ranging between 13.8 to 30.2 dBA. Measuring 122 mm x 120 mm x 75 mm (with the fan installed), the cooler weighs 385 g. Among the CPU socket types supported are LGA115x, AM4, AM3(+), and FM2(+). The company didn't reveal pricing.

ID-cooling today revealed another entry into their air-cooling line-up, specifically geared for space.-constrained environments that still require adequate cooling capabilities for low operating noise. The IS-30 is a low-profile cooler (30 mm along the Z plane, unsurprisingly) that supports up to 100 W CPU cooling - this means that even 8-core AMD Ryzen 2000 series can be cooled by this baby.

The direct contact, four copper heatpipe design ensures that heat is carried from the processor the array of aluminum fins, and then expelled by usage of a 92-mm PWM fan that spins at 800 ~ 3600 RPM and up to 40 CFM in terms of airflow. The maximum noise levels of 35.8 dB(A) should seem like an acceptable trade-off. It weighs 310 grams, which shouldn't put too big a strain on your system - if it's to remain vertical at all, as these solutions seldom are. No word on pricing at time of writing.

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced AURAFLOW X 240 AIO water cooler, featuring the newly developed powerful pump and 12V RGB lighting on both the pump and fans at the same time synchronizing with motherboard RGB control.

AURAFLOW X 240 is equipped with the newly developed powerful pump which has the flow rate reaching up to 106L/H, lift range 1.3m H2O. The pump block has a micro-fin copper base to ensure the best cooling performance. Power connector is 3pin with a 3pin to Molex adapter to help ensure 12V constant input to ensure maximum cooling performance. It also comes with a standard 12V RGB connector.

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced ZOOMFLOW 240 AIO water cooler, featuring a brand new pump design and Addressable RGB lighting on both the pump and fans at the same time synchronizing with motherboard RGB control.

ZOOMFLOW 240 is equipped with a brand new pump design with flow rate reaching up to 106L/H, lift range 1.3m H2O. The pump block has a micro-fin copper base to ensure the best cooling performance. Regarding LED lighting, it is featuring a newly developed addressable RGB lighting through a mirror-effect diffuser on the pump cover. Power connector is 3pin with a 3pin to Molex adapter to help ensure 12V constant input to ensure maximum cooling performance.

ID-Cooling introduced the SE-912i, a low-cost tower-type CPU cooler. The cooler comes in two variants based on the color of the fan's LED illumination, SE-912i-R (red) and SE-912i-B (blue). What's being sold here is a very "slim" tower-type cooler (with a thickness of just 63 mm), but it really is just an aluminium fin-stack meant for 92 mm fans, strapped onto a larger 120 mm fan, with a lot of the fan's airflow bypassing the fin-stack, which could be good to check air bleeding from the sides of the fin-stack.

Two 6 mm-thick copper heat-pipes make direct contact with the CPU at an aluminium base. The cooler only supports LGA115x and LGA1366 sockets, with the retention module attached to the base out of the box. The included fan takes in 3-pin power input, spinning at 1,600 RPM at 12V, pushing up to 58.4 CFM of air, with a maximum noise output of 26.4 dBA. Measuring 63 mm x 120 mm x 130 mm (DxWxH, including fan), the cooler weighs about 295 g. It is expected to be priced around $20.

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced DASHFLOW 360 AIO water cooler, featuring an ever enhanced pump and RGB lighting on both the pump and fans at the same time synchronizing with motherboard RGB control. The newly developed pump is designed to provide extreme cooling performance with 450L/H water flow and 3m flow lift. Metallic pump cover with the linear cuttings allows amazing RGB lighting through. A big copper base contacts CPU to help the heat transfer. Micro fin submerged design increases the heat dissipation surface.

Premium coated G1/4 fittings are equipped on both ends of the premium sleeved tubing, more reliable & performance efficient. Inside the tubing is self-contained highly efficient and eco-friendly liquid coolant. Users are not suggested to twist the fittings unless you know how to work with customized water cooling kits. A newly developed square radiator has bigger heat dissipation area to support the superb cooling of DASHFLOW 360. Equipped with a set of RGB DF-12025-RGB-TRIO high airflow fans, DASHFLOW 360 is able to cool down 400W TDP processors. Fan speed is PWM controlled from 900 to 2000RPM, pushing max. airflow of 56.5CFM each. On four corners are mounted with rubber dampeners to absorb operating vibration. Each fan has 9 LEDs around the motor center. Fan blades and frame are made of lighting emitting materials to help an evenly spread RGB lighting.

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced CHROMAFLOW 240 AIO water cooler, featuring Addressable RGB lighting on both the pump and fans at the same time synchronizing with motherboard RGB control.

The pump block has a micro-fin copper base to ensure the best cooling performance. Besides that, it is featuring a newly developed addressable RGB lighting through a ring shaped diffuser on the pump cover. Solid connectors are used on both ends of the premium sleeved tubing, more reliable & performance efficient. Inside the tubing is self-contained highly efficient and eco-friendly liquid coolant.

ID-Cooling introduced the IS-60, a low-profile, top-flow CPU cooler, with a cooling capacity of up to 130W (TDP). The cooler features a dense "C-type" design, in which an aluminium fin-stack projects along the plane of the motherboard, in very close proximity to an aluminium heatsink base, the two are connected by six 6 mm-thick nickel-plated copper heat pipes, which make indirect contact with the CPU, through a copper base.

A 15 mm-thick 120 mm fan blows air through the fin-stack. This hydraulic bearing fan takes in 4-pin (PWM) input, spins between 600 to 1,600 RPM, pushing up to 53.6 CFM of air, with a noise output ranging between 13.8-30.2 dB(A). The cooler supports mainstream desktop sockets, including AM4, AM3(+), FM2(+), and LGA115x. Measuring 120 mm x 125 mm x 55 mm, including the fan, the cooler weighs about 470 g. The company didn't reveal pricing.

ID-Cooling rolled out the DK-03 Halo AMD Red, a simple top-flow CPU cooler that acts as a replacement to AMD's decent Wraith-series coolers. It should particularly appeal to those who opt for models that lack stock coolers (eg: Ryzen 5 1600X, Ryzen 7 1700X, 1800X, etc.). The cooler's design consists of a cylindrical aluminium heatsink with radially-projecting fins, ventilated by a large 120 mm fan. The heatsink looks taller than that of a Wraith Spire, yet narrower, for clearance around the memory and VRM areas. A pre-installed clip-type retention mechanism lets the cooler support AMD sockets AM4, AM3(+), and FM2(+).

With its factory-installed fan in place, the cooler measures 130 mm x 130 mm x 63 mm (WxDxH), weighing about 365 g. The fan features a red LED diffuser that draws power from the fan's power supply. The fan spins at speeds of up to 1,600 RPM, pushing up to 58.4 CFM of air, with a noise output of 26.4 dBA. The cooler is rated for thermal loads of up to 100W, which means you will be able to run 95W TDP Ryzen chips such as the 1800X at stock speeds, without expecting much overclocking headroom. Available now, the DK-03 Halo AMD Red is expected to be priced around USD $14.99.

ID-Cooling today introduced the SE-214RGB, a variant of the SE-214C launched last year. The new model features an all-black aluminium fin-stack, and an RGB multi-color LED-illuminated fan. It also bears striking resemblance to the recently launched Ben Nevis Advanced RGB, which reveals that ID-Cooling is Alpenföhn's OEM for the cooler. The cooler retains the design of the original SE-214C, in featuring an offset aluminium fin-stack to which heat drawn from the CPU by four 6 mm-thick copper heat pipes making direct contact, us fed along various points, while a spinal rod that passes through the center of the stack adds stability.

The off-center fin-stack design enhanced clearance near the memory area of your motherboard. The included 130 mm fan features four RGB diodes embedded into the inner walls of the frame, and a white impeller, which acts as a diffuser. It takes in 4-pin PWM input, spins between 500 to 1,800 RPM, pushing up to 69.5 CFM of air, with a noise output ranging between 14.2 to 30.6 dBA. Measuring 130 mm x 74 mm x 159 mm (WxDxH), the cooler weighs about 680 g (including fan). It supports most modern CPU socket types, including AM4, AM3(+), FM2(+), LGA2066, LGA2011(v3), and LGA115x. The company didn't reveal pricing.

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced SE-207 Twin Tower Air cooler, featuring a black nickel plated Top Cover, twin tower heatsinks and two cooling fans included. The full cooler is made of 7pcs of heatpipes soldered to the copper base, two sets of aluminum fins, which all covered by a nickel plated top cover, and decorated by uniquely designed heatpipe caps.

Heat dissipation is provided by one 120mm intake fan running at 1300rpmand one PWM 120mm fan (700-1800rpm) in the middle. Fan splitter is included to support 3 fans setup. Extra fan clips are provided too in the box. Universal mounting brackets are included. The latest AMD Ryzen processors are supported. SE-207 is compatible with Intel LGA2066/2011/1366/1150/1151/1155/1156 & AMD AM4/FM2+/FM2/FM1/AM3(+)/AM2(+).

ID-COOLING a cooling solution provider focusing on thermal dissipation and fan technology research and production for over 10 years, announced FROSTFLOW+ Series AIO water cooler, featuring classic black and white theme design, high performance pump and new radiator design. The pump is designed with a simple C character with an improved light diffuser which can provide smooth and even lighting effect. Pump header has white LED lighting.

Copper base contacts CPU to help the heat transfer. Micro fin submerged design increases the heat dissipation surface. The dimension of the whole water block is ⌀65 × 43 mm. Solid connectors are used on both ends of the premium sleeved tubing, more reliable & performance efficient. Inside the tubing is self-contained highly efficient and eco-friendly liquid coolant.