News Posts matching "Inno3D"

Return to Keyword Browsing

Inno3D to Give its GeForce GTX 980 and GTX 970 the Accelero Hybrid Treatment

Inno3D is preparing to launch two new graphics cards, based on the GeForce GTX 970 and GTX 980, which will feature Arctic Cooling's latest Accelero Hybrid S cooling solution. A fusion between a factory-fitted closed-loop liquid cooler for the GPU, and fan-heatsink for the memory and VRM, the Accelero Hybrid cooler from Arctic has been licensed by Inno3D for its iChill Black Edition series. The two cards are expected to feature factory-overclocked speeds befitting the liquid cooling solution. Inno3D claims that the cooling performance of the Accelero Hybrid S is twice that of NVIDIA's NVTTM (NVIDIA Time-to-market) reference cooling solutions. Inno3D plans to launch the two some time in December, 2014.

ELSA Launches GeForce GTX 980 SAC Graphics Card

ELSA launched its first custom-design GeForce GTX 980 graphics card, bearing its SAC (silent air-cooling) badge. The card retains its signature Inno3D-sourced look, featuring a cooling solution that lets you easily clean it, to keep its cooling performance up to the mark. The cooling solution consists of an aluminium fin-stack heatsink, to which heat drawn from the GPU, is fed by a number of copper heat pipes, and ventillated by a pair of fans. The shroud on which the two are suspended, can be detached, by pulling out thumb-screws. The PCB under this cooler appears to stick to NVIDIA reference design.

The GTX 980 SAC from ELSA is factory-overclock, although the overclock is nothing to write home about. The core is clocked at 1152 MHz, with 1253 MHz GPU Boost, and 7.00 GHz memory, compared to NVIDIA reference clocks of 1126 MHz core, and 1216 MHz GPU Boost. Based on the 28 nm GM204 silicon, the GeForce GTX 980 features 2,048 CUDA cores, 128 TMUs, 64 ROPs, and a 256-bit wide GDDR5 memory interface, holding 4 GB of memory. The card draws power from a pair of 6-pin PCIe power connectors. Display outputs include three DisplayPorts, and one each of HDMI 2.0 and dual-link DVI.

Inno3D Announces the iChill GeForce GTX 980 and GTX 970

Inno3D is excited to announce the launch of the iChill and Inno3D GeForce GTX 980 and GTX 970. The GeForce GTX 980 is the world's most advanced graphics card, powered by the new incredibly fast, power-efficient NVIDIA Maxwell architecture. With twice the performance of prior-generation graphics cards and exciting new gaming technologies, this innovative GPU provides an elite experience on virtual reality, HD, and ultra-resolution 4K displays.

Enjoy hyper-realistic real-time lighting with advanced NVIDIA Cone-traced global illumination, as well as NVIDIA G-SYNC display technology for smooth, tear-free gaming. Plus, you get Super Resolution technology that delivers a 4K experience on a 1080p display. The GTX 980 even delivers great gaming to go with NVIDIA GameStream technology, that lets you stream PC games to NVIDIA Shield devices.

Inno3D Launches its GeForce GT 740 Series

Inno3D is excited to announce the new iChill & Inno3D GeForce GT 740. Go faster with GeForce GT 740 for increased productivity with the support for multiple monitors whilst experiencing faster multimedia with 13x faster photo editing and 10x faster video creation, and web browsing is now 9x faster. The GeForce GT 740 has a performance upgrade of 4x which is better for gaming compared to integrated graphics. The iChill and Inno3D GeForce GT 740 is a dedicated GPU for those that require more performance that can be gained from an IGP. Get theatre quality 3D movies by using the latest GeForce drivers with a 3D TV and watch Blu-Ray 3D in it's full glory.

Inno3D GeForce GT 740 iChill Pictured, Tested

Here are some of the first pictures of an Inno3D branded GeForce GT 740 graphics card, the GT 740 iChill. Based on a custom-design PCB, the card features a strong VRM (by GK107 requirements), which draws power from a 6-pin PCIe power connector. It features 1 GB of GDDR5 memory, across a 128-bit wide memory interface. Confirming that the GT 740 is based on the GK107, the marketing poster leaked to the web reads its ASIC string to be "GK107-425." It's configured with 384 CUDA cores, 32 TMUs, and 16 ROPs. The GPU is clocked at 1100 MHz (a factory-overclock), while the memory runs at 5.20 GHz (GDDR5-effective).

Cooling the 65W TDP GPU is a similarly overkill iChill HerculeZ 2000 cooler, designed in-house by Inno3D, which uses a dense aluminium fin-stack, to which heat drawn from the GPU, is fed by a pair of 8 mm-thick copper heat pipes, and ventilated by a pair of 100 mm fans. The cooler shroud on which the fans are suspended, can be detached, by simply removing six thumb-screws, letting you clean the heatsink underneath, which has been a USP of Inno3D's cooling solutions. Inno3D also put out its own performance numbers for the card, in which it claims the GT 740 iChill to be faster than previous generation GTX 650 (they're both based on the same chip).
Performance graphs follow.

Inno3D Readies iChill HerculeZ Cooler for GTX TITAN-Z

For those not sold on the looks or performance of NVIDIA's reference cooler for its GeForce GTX TITAN-Z graphics card, Inno3D is readying an iChill HerculeZ air cooler for the card. Pictured below, the cooler consists of a densely packed aluminium fin stack shared by two bases and their heat pipes. A base plate is in charge of cooling the memory, VRM, and bridge chip. With restrictions in place for coming up with custom-design variants of the GTX TITAN-Z, barring those with factory-fitted water blocks, Inno3D could take GIGABYTE's route in including its cooler with a reference-design board, and instructions for end-users replace the cooler by themselves. NVIDIA GeForce GTX TITAN-Z is expected to hit stores on Tuesday, the 29th of April, 2014; prices start at US $2999.


Source: Expreview

Inno3D Announces GeForce GTX 780 Ti iChill DHS

Equipped with all new voltage management, including 3 rail PWMs with load balancing, the GTX 780Ti iChill DHS can deliver an insane core overclock of over 1300MHz. Backed up by 3GB of VRAM and a 384-bit interface means that even the latest DX11 gaming are delivered to your monitor in their full cinematic glory. Out performing the GTX Titan Black without breaking a sweat, the GTX 780Ti iChill DHS is a true powerhouse of a graphics card.

The DHS-Edition with its bombastic Triple-Fan-Cooler "Herculez X3 Ultra" is a true High-End-Device that not even the GTX Titan Black can beat. The abbreviation DHS (Double Hand Selected) in this case makes calear that already pre-selected Chips for the Graphics Card have been hand picket yet another time. There is no way of getting more quality and performance. Recommended only for Extreme Gamers! Exclusively available at Overclockers UK.

Inno3D Announces the iChill GeForce GTX 780 Ti Accelero Hybrid

Inno3D iChill GeForce GTX 780 Ti Black Series Accelero Hybrid is the first graphics cooler with integrated air and liquid solution in the after-market. It offers an all-in-one solution with 200% cooling performance and 9 times quieter than the stock cooler. It is also the first LCS to have an integrated active fan specifically designed to cool RAM and VR. furthermore, it is simple to use, maintenance-free and excellent value for money.

Traditionally GPU liquid cooling is expensive, complicated and adopted by only the most technical audience, the GPU however is now one of the most power hungry and hottest components you'll find in a high-end PC and will benefit from the iChill liquid cooling system even more than CPUs.

Inno3D Announces Three GeForce GTX 780 Ti Cards

The Inno3D and iChill GeForce GTX 780 Ti is a step up from the previous GTX 780 powerhouse. The gaming performance is incredibly fast, smooth, and whisper-quiet while it's also extremely overclocked. It features a massively powerful NVIDIA Kepler GPU of 2880 cores - 20% more than the GTX 780. Plus, it comes with 3 GB of high-speed GDDR5 memory and NVIDIA GPU Boost 2.0 technology, giving you the performance capabilities you need to game at extreme settings.

The GTX 780 Ti is more than just fast and smooth. It's perfectly tuned to today's most advanced gaming technologies with features like GeForce Experience for one-click driver and settings optimization, plus NVIDIA PhysX and TXAA for smooth, sharp graphics.

NVIDIA Preparing GeForce GTX 780 GHz Edition?

With AMD's Radeon R9 290X and the upcoming Radeon R9 290, both NVIDIA's GTX TITAN, and GTX 780 are disrupted at their price points. NVIDIA is fixing its GTX TITAN competitive woes with the GeForce GTX 780 Ti, but it's looking like the GTX 780, despite its price cut to $500, could face trouble from the cheaper Radeon R9 290. NVIDIA's more hands-on solution? Launch a new SKU, that's and backed by non-reference designs for the most part, which some of its add-in card (AIC) partners are referring to as "GeForce GTX 780 GHz Edition."

Simply put, the "GeForce GTX 780 GHz Edition" is your ordinary GTX 780 with increased clock speeds of 1006 MHz core, 1046 MHz GPU Boost, and an untouched 6.00 GHz memory. The card is based on a new stepping of the GK110 silicon, labeled "GK110-300-B1," compared to the original's "GK110-300-A1." Expreview discovered its Inno3D GTX 780 iChill HerculeZ 3000 graphics card to be based on this new silicon, and at its given speeds of 1006/1046/6008 MHz, found to to be about 15 percent faster than a standard GTX 780, and about 7 percent faster than a GTX TITAN. It's also about 6.2 percent faster than an R9 290X on the same test-bed. Power consumption isn't up significantly, and the cooler that's an Arctic Cooling solution, does a good job at keeping the temperatures manageable, and keeps throttle limits away. Find the complete review at the source.


Source: Expreview

Inno3D Announces the iChill HerculeZ X3 Ultra Cooler Kit

Inno3D is excited to announce the new iChill HerculeZ X3 Ultra Cooler Kit that sports 11 scythe blades on each of its three enormous fans that work actively with the Herculez Bearing to keep the temperature cool under the hood. The fan casing and blades are removable so that the cleaning process is made much easier allowing for a thorough removal of dust and grime from all parts of the fan.

The Herculez is made up of a large copper base heatsink with 5 large high heat flux heatpipes protruding from both side. Heatpipes are an efficient way of moving heat from one area to another and are usually used to connect the high density block of the cooler with the large surface area fins. A new addition to the HerculeZ range is the HerculeZ backplate designed to withstand and protect from potential knocks and bumps to the PCB

Inno3D Announces Two New Overclocked GTX 780 Graphics Cards

Inno3D expanded its GeForce GTX 780 lineup with two additions, taking the count to four; the iChill Black GTX 780 Accelero Hybrid, the iChill GTX 780 HerculeZ 3000 X3 Ultra, iChill GTX 780 HerculeZ 2000 OC, and GTX 780 NVIDIA-reference. The iChill Black GTX 780 Accelero Hybrid, is practically identical to the company's iChill Black GTX TITAN Accelero Hybrid, combining an NVIDIA-reference PCB with Arctic's Accelero Hybrid closed-loop liquid cooling solution. The cooler uses a liquid cooling block to cool the GPU, and a fan-heatsink to cool other components, like the memory and VRM. With lack of memory chips on the reverse side of the PCB, we imagine the card to lack a back-plate.

The iChill Black GTX 780 Accelero Hybrid ships with factory-overclocked speeds of 1020 MHz core, 1059 MHz GPU Boost, and 6280 MHz (GDDR5-effective) memory; compared to NVIDIA reference speeds of 863 MHz core, 900 MHz GPU Boost, and 6008 MHz memory. Inno3D claims this to be the fastest GTX 780 card out-of-the-box that money can buy. Moving on, the company also unveiled the air-cooled iChill GTX 780 HerculeZ 3000 X3 Ultra. Redundant-sounding naming aside, the card features the same beefy HerculeZ 3000 cooling solution featured on several others of the company's products. It ships with factory-overclocked speeds of 1006 MHz core, 1046 MHz GPU Boost, and 6200 MHz memory. Both these cards are claimed by the company to be as fast, or faster, than a GeForce GTX TITAN, out of the box. The company didn't reveal pricing.

Inno3D Rolls Out GeForce GTX 760 iChill HerculeZ 3000

Inno3D rolled out its fourth GeForce GTX 760 board design, apart from the reference-design card, the HerculeZ OC, and the HerculeZ 2000. The new GTX 760 iChill HerculeZ 3000 is based on the same exact board as the company's GeForce GTX 770 iChill HerculeZ 3000, with a meaty 7-phase VRM, an 8-layer PCB, and the large triple-fan HerculeZ 3000 cooling solution with a backplate. Apart from the GPU, the only physical difference between the two cards, is the power inputs. This card uses just a pair of 6-pin connectors, while the GTX 770 iChill HerculeZ 3000 relies on a combination of 8-pin and 6-pin connectors.

The GeForce GTX 760 iChill HerculeZ 3000 uses a PCB heavily based on NVIDIA's GeForce GTX 680 reference design, with a 5+2 phase VRM. It gives you out of the box clock speeds of 1060 MHz core, 1124 MHz GPU Boost, and 6.20 GHz (GDDR5-effective) memory, compared to NVIDIA-reference clocks of 980 MHz core, 1033 MHz GPU Boost, and 6.00 GHz memory. The card features 2 GB of memory. Its cooler uses two large aluminum fin stacks that dissipate heat from the GPU, drawn by five heat pipes; and ventilated by a trio of 80 mm fans. The fans are suspended on a die-cast metal shroud that's easily detachable by pulling out a few thumb-screws, to clean the fans and underlying heatsinks. Although there's nothing to cool on the reverse side of the PCB, Inno3D dropped in a back-plate anyway. Inno3D didn't reveal global launch plans, but in China, the card should retail for 1,799 RMB (US $294).

Source: Expreview

ELSA Announces GeForce GTX 760 SAC Graphics Card

ELSA announced its non-reference GeForce GTX 760 offering, the GTX 760 SAC (silent air-cooling). Based entirely on Inno3D's iChill design, the card features a blue-colored non-reference design PCB, and a cooling solution that's easy to clean. It uses a conventional aluminum fin-stack design, covered by an easy-to-remove die-cast metal shroud, on which its two 70 mm fans are suspected. The shroud can be detached by simply turning a few thumb-screws, letting you clean the fans and heatsink. The GTX 760 SAC features NVIDIA-reference clock speeds of 980 MHz core, 1033 MHz GPU Boost, and 6.00 GHz memory. Based on the 28 nm GK104 silicon, the GeForce GTX 760 packs 1,152 CUDA cores, 96 TMUs, 32 ROPs, and a 256-bit wide GDDR5 memory interface, holding 2 GB of memory. ELSA is including a 1-week's subscription to ArcheAge, a Japanese MMO.

Source: Hermitage Akihabara

Inno3D Announces Trio of GeForce GTX 760 Graphics Cards

Inno3D dropped its hat into the GeForce GTX 760 ring with three offerings, the NVIDIA reference-design base-model; the HerculeZ OC 2 GB; and the HerculeZ 2000 4 GB (pictured in that order). The base model is practically identical to NVIDIA's reference design, except its PCB is colored blue. It sticks to NVIDIA-reference clock speeds of 980 MHz core, 1033 MHz GPU Boost, and 6.00 GHz memory. This card will likely sell at the baseline price of $249.99.

Moving on, the HerculeZ OC 2 GB uses a slightly compacted variant of the HerculeZ 2000 dual-fan cooler. It still gets you the easy-to-remove metal cooler shroud by turning a few thumb-screws, giving you access to the GPU heatsink underneath. This card features 2 GB of memory, and factory-overclocked speeds of 1006 MHz core and 1059 MHz GPU Boost, while leaving the memory clock untouched. This card could command a $10-20 premium. Lastly, there's the HerculeZ 2000 4 GB. This card features the same HerculeZ 2000 dual-fan cooler and PCB as the one found on Inno3D's GeForce GTX 770 OC graphics card. It offers the same clock speeds as the HerculeZ OC 2 GB, but with double the memory amount, at 4 GB. Given its memory amount and premium cooling, we won't be surprised if it pole-vaults the $300 mark.

ELSA Announces 4 GB GeForce GTX 770 SAC

NVIDIA partner ELSA, which specializes in Quadro and GeForce graphics cards, rolled out its GeForce GTX 770 SAC graphics card, featuring 4 GB of memory. The card appears to be sourced from Inno3D, which can be made out with the design of the cooler. The cooler features an easily detachable shroud, which lets you clean the underlying heatsink. This factory-overclocked graphics card ships with 1070 MHz core, 1100 MHz GPU Boost, and 7.00 GHz memory. Based on the GK104 silicon, the GeForce GTX 770 features 1,536 CUDA cores, 128 TMUs, 32 ROPs, and a 256-bit wide memory interface. ELSA didn't announce pricing.

ELSA Announces GeForce GTX 770 SAC

ELSA rolled out its GeForce GTX 770 SAC (silent air cooling) graphics card (model: GD770-2GERX). It combines a custom-design PCB with its SAC cooling solution, both of which appear to be Inno3D designs. It offers factory-underclocked speeds of 1046 MHz core, 1070 MHz GPU Boost, and 7.00 GHz memory. The SAC cooler uses a series of copper heat pipes that make direct contact with the GPU, which convey heat to a monolithic aluminum fin-stack. This is ventilated by a pair of 80 mm fans, suspended on a die-cast metal shroud that's easily detachable by turning six thumb-screws. The card draws power from a combination of 6-pin and 8-pin PCIe power connectors; display outputs include two dual-link DVI, HDMI, and DisplayPort. The card should be priced on-par with most reference-design GTX 770 cards.

Inno3D GeForce GTX 780 iChill HerculeZ 3000 Pictured

Inno3D isn't stopping with the GTX 780 iChill HerculeZ 2000 as its custom design offering, the company showed off an even bigger iChill HerculeZ 3000 variant at Computex. Pictured below, the card uses the bigger triple-fan VGA cooler found on some of its previous-generation graphics cards, with a few touch-ups. The dual-slot cooler uses two aluminum fin stacks that draw heat from the GPU, which are ventilated by a trio of 92 mm fans. Users have the flexibility of detaching the fans by simply turning a few thumb-screws, to clean the underlying heatsink. The cooler sits on top of an NVIDIA reference design PCB, and there are no components on the reverse side that need cooling, but Inno3D dropped in a backplate anyway. The company didn't disclose clock speeds.

Inno3D GeForce GTX 770 Redefines Fast

Inno3D is thrilled to announce the launch of the eagerly awaited Inno3D GeForce GTX 770. Fast just got faster with the next-generation GeForce GTX 770, a high-performance graphics card designed from the ground up to deliver high-speed, super-smooth gaming.

The next-generation GeForce GTX 770 is a high-performance graphics card designed from the ground up to deliver high-speed, super-smooth gaming. It's stacked with unique gaming technologies that make it fast. Really fast. GTX 770 features a massively powerful NVIDIA Kepler GPU. Plus, it comes with 7 Gbps memory-the fastest ever on a GPU and NVIDIA GPU Boost 2.0 technology, giving you the performance capabilities you need to game at extreme settings.

Inno3D Announces the GeForce GTX 780 iChill HerculeZ 2000 Graphics Card

Inno3D is excited to unveil the launch of the much anticipated Inno3D GeForce GTX 780. The new GeForce GTX 780 marks an evolution in gaming performance-an insanely fast, smooth, and whisper-quiet experience, every time. It features a massively powerful NVIDIA Kepler GPU of 2,304 cores-50% more than its predecessor. Plus, it comes with 3 GB of high-speed GDDR5 memory and NVIDIA GPU Boost 2.0 technology, giving you the performance capabilities you need to game at extreme settings.

The GTX 780 is more than just fast and smooth. It's perfectly tuned to today's most advanced gaming technologies with features like GeForce Experience for one-click driver and settings optimization, plus NVIDIA PhysX and TXAA for smooth, sharp graphics.

Inno3D Launches a Pair of GeForce GTX 650 Ti Boost Graphics Cards

Inno3D is thrilled to announce the launch of the iChill GeForce GTX 650 Ti Boost, together with the Inno3D GeForce GTX 650 Ti Boost. Both the iChill and Inno3D GeForce GTX 650 Ti Boost boast an amazing 768 CUDA cores, a 192-bit interface to 2GB of onboard GDDR5 RAM, and boost speeds of 1102MHz and 1033MHz respectively.

The iChill and Inno3D GeForce GTX 650 Ti Boost continues with the redesigned from the ground up architecture to deliver the best performance on DX11 - adding dedicated engines in the GPU to accelerate key features like tessellation.

Inno3D Announces GeForce GTX Titan iChill Black Series

Inno3D rolled out its newest flagship graphics card, the GeForce GTX Titan iChill Black Series. The card ships with Arctic's Accelero Hybrid cooling solution pre-fitted to an NVIDIA reference design GTX Titan PCB. The cooler uses a combination of a closed-loop liquid block to cool the GPU, and fan-heatsink to cool other hot components on the card, such as memory chips and VRM.

The GTX Titan iChill Black series ships with factory-overclocked speeds of 937 MHz core, and 980 MHz GPU Boost, against NVIDIA reference speeds of 837 MHz core and 876 MHz GPU Boost. Memory clock speed stays at 6.00 GHz. Based on the 28 nm GK110 silicon, NVIDIA's GeForce GTX Titan features 2,688 CUDA cores, 224 TMUs, 48 ROPs, and a 384-bit wide GDDR5 memory interface, holding 6 GB of memory. The card draws power from a combination of 6-pin and 8-pin PCIe power connectors, display outputs include a pair of dual-link DVI, HDMI, and DisplayPort. The company did not release pricing or availability information.

Inno3D Intros its GeForce GTX Titan Graphics Card

Inno3D is thrilled to unveil the much anticipated Inno3D GeForce Titan, the world's fastest single GPU graphics card ever built that boasts ground breaking power efficiency. The sleek exterior of cast aluminum and trivalent chromium plating of the Titan has a custom vapor chamber cooler. The Inno3D GeForce Titan powerhouse delivers high-end performance with style. Get all the premium GTX gaming technologies such as NVIDIA 3D Vision , PhysX, and Quad SLI for the ultimate PC gaming experience, plus NVIDIA surround sound with up to four monitors.

ELSA Announces GeForce GTX 660 and GTX 650 SAC Series Graphics Cards

ELSA announced a pair of new SAC (silent air-cooling) series graphics cards based on the GeForce GTX 660 and GTX 650. Likely originally made by Inno3D, ELSA's graphics cards feature an easily removable cooler shroud that lets you clean the fan assembly and the heatsink. The GTX 660 SAC uses a dual- 75 mm fan cooler that can keep the card running at 25 dBA, and up to 8°C lower than NVIDIA-reference cooler. It is clocked at 980 MHz core, 1033 MHz GPU Boost, and 6.00 GHz memory. It packs 2 GB of GDDR5 memory across a 192-bit wide memory interface.

ELSA's GeForce GTX 650 SAC, on the other hand, features a more compact PCB, with a single 85 mm fan that keeps the card running with a noise output of 24 dBA, and below 60°C. Its core is clocked at 1085 MHz, and memory at 5.00 GHz. It packs 1 GB of GDDR5 memory across a 128-bit wide memory interface. Both cards include ELSA's GPU Optimizer software that lets you tweak clock and fan speeds. Slated for market release on October 25, the ELSA GTX 660 SAC is expected to be priced at 25,800 JPY (US $328); the ELSA GTX 650 SAC, on the other hand, is slated for October 18, and is priced at 12,800 JPY (US $163).

Source: Hermitage Akihabara

Inno3D Intros its GeForce GTX 650 Ti

Inno3D launched its GeForce GTX 650 Ti graphics card. The card is a combination of NVIDIA reference design PCB and the company's in-house iChill HerculeZ single-fan cooler, which features an easily-detachable shroud using thumb-screws, which makes it easy to clean the heatsink below. Inno3D's card sticks to NVIDIA-reference clock speeds of 925 MHz core and 5.40 GHz memory. It packs 1 GB of memory across a 128-bit wide GDDR5 memory interface. The iChill HerculeZ cooler could let Inno3D charge a tiny premium over the base MSRP of US $150.
Return to Keyword Browsing