News Posts matching "Lian Li"

Return to Keyword Browsing

Lian Li Announces the PC-V2130 Brushed Aluminum Full Tower

Lian-Li Industrial Co. Ltd today announces the release of a new brushed aluminum full tower chassis - PC-V2130. The update of the popular PC-V2120, the PC-V2130 improves on the design by adding extensive water cooling support, a more versatile HDD system, enhanced cable management.

At 94L, the PC-V2130 can handle any hardware PC enthusiast desire. Motherboards up to HPTX are supported. Up to 11 3.5"/2.5" drives can be mounted behind the motherboard tray and on the individually removable hard drive bays. An included removable bracket allows for 4 more 2.5" drives to be installed. The chassis also features a modular 5.25" cage that gives builders the flexibility to use the space as they see fit.

Lian Li Announces New Brushed Aluminum Mini-ITX Chasis – PC-Q01

Lian-Li today announces a new brushed aluminum Mini-ITX chassis - PC-Q01. This compact case is designed for small office/home PC environments and features a tool-lessly removable L-shaped cover that makes installations effortless in space-confined ITX systems. With its versatile storage capabilities, the 13.3L PC-Q01 provides ample space for hardware compatibility. Mini-ITX/Mini-DTX motherboards are supported, as well as double-slotted graphics cards and ATX power supplies up to 210 in length. To provide maximum storage capabilities without compromising space, on both the side panel and case floor one 3.5" and one 2.5" or two 2.5" drives can be mounted, allowing for a total of 4 drives.

Lian Li Releases PC-B16 and PC-A61 Brushed Aluminum Mid-Tower Chassis

Lian-Li Industrial Co. Ltd, today announces the release of PC-B16 and PC-A61 - two new brushed aluminum mid-tower chassis featuring a modular 5.25" cage and removable HDD bays, allowing for maximum customization. These two models share the same spacious internal design - with the PC-B16 focusing on silent operation.

Both the PC-B16 and PC-A61, 59.7L and 57.5L respectively, boast Lian Li's tool-less HDD bay system, allowing DIY builders to mount either a 3.5" or 2.5" drive on the six individually removable hard drive bays. To free up space or to enhance airflow from the two front 120mm fans, all six bays can be removed with the twist of a few thumbscrews. The 5.25" cage which houses three 5.25" bays is completely modular, giving builders flexibility to use the space as they see fit. An additional 2.5" can also be mounted behind the motherboard tray.

Lian Li Releases Two Modular Chassis: PC-V359 and PC-Q36

Lian-Li Industrial Co. Ltd, today announces the release of two highly modular, brushed aluminum chassis with slide off side panels: PC-V359 and PC-Q36. The Micro-ATX PC-V359 and Mini-ITX PC-Q36 feature a see-through top panel and front window, making builds easily visible from the top and the front. Both chassis are are almost entirely modular - the top panel can be removed with the twist of four thumbscrews, and once removed, the side panels can be slid right off, providing total access to interior hardware in a matter of seconds.

Furthermore, after removing the two thumb screws from the 3.5" cage, the cage itself, as well as the entire front panel, can be removed. The back panel can also be removed after taking out two screws. The PC-V359 and PC-Q36 can utilize air, water, and passive cooling to keep builds running at a comfortable temperature. Ventilation with filters are located at the top of both side panels. One side can support a 240mm radiator, while the other side ventilates the GPU.

SilverStone Temjin TJ12 Monstrosity Detailed

SilverStone Temjin TJ12 was the elephant in the room at its Computex booth. This jumbo cubical case is huge - perhaps bigger than Lian Li PC-D600. Unlike the PC-D600, and Corsair's smaller Carbide Air 540, the TJ12 isn't a vertically-partitioned two-compartment case. Its motherboard tray (supports ATX, E-ATX, XL-ATX, and HPTX) is oriented along the plane of its front panel, with rear-I/O facing upwards. Add-on cards can easily be as long and tall as they make them. At the bottom of the case, are four large fans, with a mesh, onto which you can latch on radiators of all shapes and sizes. The drive cage and PSU bay are suspended along a sloping panel, in a way that they don't obstruct anything near the motherboard tray. The actual "front-panel" is located at the top. So the TJ12 is essentially a case you put on your floor. and access its goods from the top.

Lian Li Releases DK-01X and DK-02X Desk Chassis

Lian-Li Industrial Co. Ltd, today announces the release of two desk chassis - the single-system DK-01X and the dual-system DK-02X. Constructed of aluminum and combining the symbiotic relationship of desks and computer cases, these all-black hybrid chassis allow DIY builders to build a full computer inside a desk and show off their hardware creations through tempered glass desktops.

The DK-01X and DK-02X feature a lockable sliding door to make installations and upgrades easy. The adjustable/removable keyboard tray makes typing and mousing comfortable, and the side mounted pocket with headphone rack allows users to easily store unused accessories. The DK-01X support motherboards up to HPTX. The DK-02X supports motherboards up to HPTX for its workhorse-oriented system side, and mini-ITX motherboards on the gaming-oriented side.

Lian Li to Showcase 3 Desk Chassis Models at COMPUTEX 2014

Lian-Li Industrial Co. Ltd, is pleased to announce that three versions of its desk chassis, plus 7 new cases will be on display at COMPUTEX 2014 in Taipei, Taiwan from June 3 to June 7, 2014. Lian Li invites all interested parties to visit their booth, #D0629a Hall 1 at the World Trade Center. Booth visitors can take a seat at Lian Li's DK01, DK02, and DKQ1 desk chassis. Constructed of aluminum and combining the symbiotic relationship of desks and computer cases, these hybrid chassis allow DIY builders to build a full computer inside a desk and show off their hardware creations through tempered glass desktops.

In addition to the three desk chassis, booth visitors can get a hands-on preview of 7 new models before they hit the market, including test benches, small form factor cases, and mid-towers. Lian Li will be also be displaying its current line of mini, micro, mid, and full tower brushed aluminum chassis with the high quality build and features that are to be expected from Lian Li.

Lian Li Launches the PC-Q01 Mini-ITX PC Chassis

Lian Li today announces a new brushed aluminum Mini-ITX chassis - PC-Q01. This compact case is designed for small office/home PC environments and features a tool-lessly removable L-shaped cover that makes installations effortless in space-confined ITX systems.

Take Advantage of Increasingly Efficient SFF Hardware
With its versatile storage capabilities, the 13.3L PC-Q01 provides ample space for hardware compatibility. Mini-ITX/Mini-DTX motherboards are supported, as well as double-slotted graphics cards and ATX power supplies up to 210 mm in length.

Lian Li Previews the PC-V2130 Full-Tower Chassis

Lian Li previewed its next flagship ATX full-tower chassis, the PC-V2130. The latest aluminium monstrosity from Lian Li features a ridged and brushed aluminium front door, and anti-acoustic padded panels all around. It's wheeled at the base. Measuring 237 mm x 640 mm x 625 mm (WxHxD), and weighing in at 9.8 kg, the case comes in three trims - all silvery aluminium, black aluminium exteriors with silvery aluminium interiors; and black aluminium exteriors with black aluminium interiors. The motherboard tray can seat XL-ATX, apart from standard ATX form-factors. It offers 10 expansion slot bays.

Storage areas of the PC-V2130 includes five 5.25-inch drive bays, eight 3.5-inch bays spread across individual trays;four 2.5-inch bays along the back side of the cage, and three 3.5-inch bays behind the motherboard tray. Ventilation includes two 140 mm front intakes, two 140 mm top exhausts, a 140 mm bottom intake, and a 120 mm rear exhaust. Front panel connectivity includes four USB 3.0 ports (standard headers), an eSATA port, and HD audio jacks. The case offers room for graphics cards as long as 36 cm (up to 48 cm if you pull out the drive trays), PSUs as long as 20 cm, and CPU coolers as tall as 18 cm. Lian Li didn't reveal pricing or availability details.

Lian Li to Showcase DK01 Desk Chassis at CeBIT 2014

Lian-Li Industrial Co. Ltd, is pleased to announce that the DK01 desk chassis, along with community collaborated chassis and two unreleased models, will be on display at CeBIT 2014 in Hannover, Germany from March 10 to 14, 2014. Lian Li invites all interested parties to visit them at Hall 17, Booth F24. Combining the symbiotic relationship of desks and computer cases, the DK01 is a chassis like no other. Constructed of aluminum, this hybrid chassis allows DIY builders to build a full computer inside the desk and show off their hardware creations through the tempered glass desktop. The DK01 eliminates the need for PC towers.

Modified according to feedback across the social media and tech media sphere, the newly released, community collaborated PC-A51 mid-tower chassis as well as the updated versions of the previewed PC-B16 and PC-A61 will also be on display at Lian Li's booth. These three fully aluminum chassis are a conglomeration of user feedback on prototype models and Lian Li's time-honed expertise and engineering capabilities. Visitors to the booth will be able to provide their feedback for the PC-B16 and PC-A61 as well as the DK01, which will be updated additionally after the show.

Lian Li Launches the PC-A51 Aluminum Mid-Tower PC Case

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid-tower chassis with a reverse airflow design - PC-A51. Previewed to the worldwide DIY community in its prototype stage, the PC-A51 is a conglomeration of user feedback and Lian Li's time-honed expertise and engineering capabilities.

Reverse Airflow Design
This community collaborated chassis sports a reverse airflow design in which cool air is pulled into the chassis from the rear filtered 120 mm fan. The front 140mm fan above the front-mounted PSU pulls hardware-damaging hot air out of the case. An additional 120 mm or 140 mm fan can be mounted on the floor of the chassis.

Lian Li Previews PC-B16 and PC-A61 Cases Ahead of CeBIT

Lian Li posted pictures of prototypes of two of its upcoming cases, the PC-B16 and PC-A61 (pictured in that order). The two will be launched in March, at the 2014 CeBIT. Both cases are based on a common frame design (the same innards), but the PC-B16 has an added level of noise reduction with its front door. Measuring 230 mm x 490 mm x 530 mm (WxDxH), the two dry-weigh around 6.5 kg. Color options include all-black (including interiors); and white (with bare aluminium interiors).

The PC-B16 and PC-A61 feature a unique new drive cage design, in which individual 3.5-inch drive bays can be detached, so you don't have to lose 3-4 bays just to make room for a dual-slot graphics card of abnormal length. Each bay has retention holes for two 9.5 mm-thick 2.5-inch drives. With the drive bays in place, you get room for graphics cards as long as 280 mm. With the bays out of the way, your cards can be as much as 420 mm long. There's room for CPU coolers as tall as 170 mm. Behind the motherboard tray, there's a crawl-space of 30 mm, letting you comfortably manage even the thickest cable your PSU throws at you (the 24-pin ATX). Cooling system on the PC-B16 and PC-A61 include two 120 mm front intakes, a 120 mm rear exhaust, and two top 140 mm exhausts. Lian Li didn't finalize pricing, or even the design for that matter, and is taking in community feedback. Fire away.

Lian Li DK01 Desk-Type Chassis Prototype Unveiled

Lian Li is feeling experimental again. After taking the PC enthusiast community's opinion on the PC-A51 prototype late last year, the company undertook another such exercise, this time with an emerging form-factor, desk-type chassis, chassis that doubles up as your desk. The DK-01 prototype by Lian Li Measures 800 mm x 795 mm x 600 mm (WxHxD), the business end of the case is its top drawer, which houses your hardware, and metal u-frames that make up its legs. A clear glass or acrylic top gives you a bird's eye view of your creation from above.

The DK01 features room for a gargantuan HPTX motherboard, which means it can also hold EATX, XL-ATX, and standard ATX motherboards. The case has room for up to fourteen (14) 3.5-inch drives, which are arranged in detachable bays. Removing half the bays creates room for large motherboards, and long (up to 410 mm) add-on cards. With the caddies in place, that room shrinks to a still respectable 280 mm. The case supports PSUs as long as 280 mm, and CPU coolers as tall as 180 mm. At various locations, there is room for up to seven 120 mm fans, which you can use to deploy a 240 x 120 mm and 360 x 120 mm radiators.
More pictures follow.

Lian Li Releases the PC-Q33 Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum Mini-ITX chassis - PC-Q33 - with a flip-open design and space-efficient hardware support. The PC-Q33 provides plenty of working space for DIY builders. Builders can swing open the top and front panel of this brushed aluminum chassis providing easy access to the internal components.

At 18L, the PC-Q33 supports a tremendous amount of hardware for its size. Taking advantage of every available space Lian Li's latest brushed aluminum chassis accommodates CPU coolers up to 180mm (7.0") in height and ATX power supplies up to 200mm in length. The latest powerful low-profile graphics cards up to 220mm (8.6") easily fit inside the chassis.

Lian Li Releases the PC-V358 M-ATX Chassis in North America

Lian-Li Industrial Co. Ltd, today releases the brushed aluminum M-ATX cube chassis - PC-V358 - in North America. The PC-V358 provides plenty of working space for DIY builders. Builders can swing open the top and front panel of this brushed aluminum chassis providing easy access to the internal components. 240mm radiators as well as AIO liquid cooling kits can be installed on a hinged bracket. The bracket is secured by thumbscrews and can be swung open on its hinge to allow for easy access of the internal components. The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.

MSI Planning Gaming Series Cases and Coolers

"Gaming Series" proved to be a successful way for MSI to package its graphics cards and motherboards. The signature deep-red and black color scheme, coupled with the "dragon" logo deck up MSI products in a premium way that only ROG managed for ASUS; and the company is looking to milk it further. According to an Expreview report, MSI is planning to launch Gaming Series-branded cases and cooling solutions. MSI isn't new to cases, but its cases haven't exactly made a mark for themselves, or seen wide availability. The company will, hence, tie up with proven case (and cooling) manufacturers such as NZXT, and share its branding with them.

Enthusiasts in China spotted MSI Gaming Series variants of popular NZXT cases, such as the Phantom 410 (pictured below), and also certain cases from Jonsbo, a local Lian Li-like case maker that specializes in all-aluminium monoliths. Sources also told Expreview that MSI could share the Gaming Series brand with the likes of Thermalright/Cogage, which could launch a variant of its True Spirit TS120 tower-type CPU air cooler.
Source: Expreview

Lian Li Unveils PC-A51 Prototype, Seeks Feedback Before Launch

Lian Li posted pictures of an unreleased prototype case, which it named PC-A51. Design of the new all-aluminium, wide-body ATX mid-tower case is not finalized, and the company is seeking feedback from the PC enthusiast community (you can leave your comments with us). The PC-A51, in its current iteration, starts off signature Lian Li style - a black aluminium monolith, but tries out something unusual with its clear acrylic window, and metallic red interiors. The motherboard tray, along with portions of the drive cages, and the rear panel, feature a contrasting of black and red. The case features a front-oriented PSU bay. The case has room for add-on cards as long as 28 cm, PSUs as long as 16 cm, and CPU coolers as tall as 17.5 cm.

The motherboard tray on the PC-A51 prototype can seat boards in common ATX, micro-ATX, and mini-ITX form-factors; along with the internal drive bay, it's largely tool-free. There's room for five 3.5-inch drives (each tray can stack up to two 2.5-inch drives), and a 5.25-inch drives. Ventilation includes a 140 mm front-intake, two 140 mm top exhausts (which can hold on to radiators as big as 140 x 280 mm); and a 140 mm rear exhaust. The back side of the motherboard tray has clearance of up to 2 cm, which can let you handle your cable spaghetti better. Front-panel connectivity include four USB 3.0 ports (standard header), an eSATA port, and HD audio jacks.

Lian Li Unveils the PC-Q35 Mini-ITX PC Chassis

Lian-Li Industrial Co. Ltd, today announces the brushed aluminum PC-Q35 chassis. Designed for users who want to build their own NAS as well as system integrators, the compact PC-Q35 supports Mini-ITX and Mini-DTX motherboards.

Small Chassis with Big Hardware Support
With a volume around 29.2L, the PC-Q35 supports an outstanding amount of hardware for its size. Up to seven hard drives can be installed: five 3.5" and two 2.5" drives. Expansion cards up to 300 mm and ATX power supplies up to 200 mm are also supported.

Lian Li Readies the PC-V358 Mini Tower PC Case

Lian Li is currently preparing the release of a new, all-aluminum chassis, a mini tower with the model number PC-V358. Pictured below, this case measures 324 (W) x 286 (H) x 390 (D) mm, it weighs 4.2 kg, and features support for Micro-ATX and Mini-ITX motherboards, a side I/O panel with USB 3.0 (x 2) and HD audio ports, one slim 5.25-inch drive bay, two 2.5-inch and six 3.5-inch drive bays, four PCI slots, and three 120 mm fans - two in front and one at the rear.

The PC-V358 comes in two color versions - black and silver, and is listed on pre-order at €137.

Lian Li Releases the PC-D600 Brushed Aluminum Chassis in North America

Lian-Li Industrial Co. Ltd today releases the PC-D600 double wide brushed aluminum chassis that was previously announced at COMPUTEX 2013. Supporting EATX, ATX and Micro-ATX motherboards, the PC-D600 with 2mm thick aluminum panels has a two compartment design, supports water cooling setups, and has numerous tool-less features to give absolute freedom to enthusiasts and modders to build a high end system. Separating the internal components into two compartments, the PC-D600 allows DIY enthusiasts to show off high end and intricate setups through the side panel window, while giving plenty of room for the wires and less eye-catching components on the other side of the motherboard tray. Not only does the two compartment design allow enthusiasts to show off their builds, it also allows uninterrupted airflow across the heat generating components.

Lian Li and Micro Center Sign Distribution Agreement

Lian-Li Industrial Co. Ltd, today announces that it has signed a distribution agreement with Micro Center, technology retailer focused on knowledgeable computer users. Micro Center will be carrying the latest Lian Li cases and accessories as well as older popular models. Micro Center will also be the first US vendor to carry the PC-A79 full tower and M-ATX PC-V360 chassis. Distribution begins at the end of September 2013.

Micro Center operates twenty-two large stores in major markets in the USA. Founded in 1979 in Columbus, OH, Micro Center is a destination retailer designed to satisfy the dedicated computer user. Uniquely focused on computers and computer-related products, Micro Center offers more computer and computer-related items (more than 30,000 in stock) than any other retailer. Micro Center is deeply passionate about providing product expertise and exceptional customer service.

Lian Li Announces the PC-10N Mid Tower Chassis in North America

Lian-Li Industrial Co. Ltd today releases a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N, in North America. Besides allowing for a 240mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management. A hinged bracket directly across the CPU allows DIY builders to install a 240mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.

Lian Li Announces PC-D600 Series Cases

Lian Li announced its PC-D600 series dual-compartment cases, which it first showcased at Computex 2013. Unlike the Corsair Air 540D, which mates a broader compartment holding the motherboard tray, with a narrower one holding the drive cages, PC-D600 holds two compartments of uniform widths, with their partition running right through the middle. The right-side component holds ten 5.25-inch drive cages, from which one is occupied by the included front-panel, and six by 5.25" to 3.5" adapters. There's room on the floor to latch 2.5-inch drives on to, the remaining room in the compartment can be used for various liquid-cooling components, including a 420 x 140 mm radiator.

Moving on to the left-side compartment, this one holds the EATX motherboard tray, which in addition, supports SSI-CEB, and of course common ATX form-factors. This compartment also holds the PSU bay, three 140 mm front intakes (which can hold on to another 420 x 140 mm radiator, if your motherboard doesn't stretch all the way); and a 120 mm rear exhaust. There are plenty of valved cable-management holes running between the two compartment. The case, as with most premium Lian Li cases, is made of aluminium. Measuring 382 mm x 525 mm x 415 mm (WxHxD), dry-weighs 9.2 kg. It's available in black (PC-D600B) and silver (PC-D600A). Lian Li didn't give out pricing.
A video presentation follows.

Lian Li Releases the PC-A79 Full Tower Chassis

Lian-Li Industrial Co. Ltd today announces the release of a new brushed aluminum full tower chassis with a versatile cooling design and removable motherboard tray - PC-A79 - in North America. Capable of supporting HPTX, E-ATX, XL-ATX, ATX, and Micro-ATX motherboards, this fully aluminum full tower easily contains the latest high-end components, while keeping these components at optimal operating temperatures with its versatile and effective cooling design.

The PC-A79 gives DIY builders several cooling options for a variety of system setups. For the front intake, the three HDD cages have 120mm fans mounted to them. These cages can be set up so that the fans are either towards the front of the case or behind the cage. A dust filter on each on the individual 5.25" front bezels prevents dust from coming in, no matter the setup.
Return to Keyword Browsing